diff --git a/Start-and-Endcode-with-preheat-and-purge-line.mediawiki b/Start-and-Endcode-with-preheat-and-purge-line.mediawiki
index 19f2836..7d75a03 100644
--- a/Start-and-Endcode-with-preheat-and-purge-line.mediawiki
+++ b/Start-and-Endcode-with-preheat-and-purge-line.mediawiki
@@ -10,7 +10,7 @@ For more information about every single Line, please visit https://marlinfw.org/
  M109 S{material_print_temperature_layer_0} ; preheat and wait for hotend
  M300 S1000 P500                            ; BEEP heating done
  G28 X0 Y10 Z0                              ; move X/Y to min endstops
- M420 S1                                    ; enable mesh leveling (not needed anymore)
+ M420 S1                                    ; enable mesh leveling
  G0 Z0.15                                   ; lift nozzle a bit
  G0 X2                                      ; move away from clips
  G92 E0                                     ; zero the extruded length
@@ -29,7 +29,7 @@ For more information about every single Line, please visit https://marlinfw.org/
  M109 S[first_layer_temperature]            ; preheat and wait for hotend
  M300 S1000 P500                            ; BEEP heating done
  G28 X0 Y10 Z0                              ; move X/Y to min endstops
- M420 S1                                    ; enable mesh leveling (not needed anymore)
+ M420 S1                                    ; enable mesh leveling
  G0 Z0.15                                   ; lift nozzle a bit
  G0 X2                                      ; go away from clips
  G92 E0                                     ; zero the extruded length