From 62223e8bdcc87f0f612d445550a1a49fd5d60cd4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Oliver=20K=C3=B6ster?=
 <36196269+knutwurst@users.noreply.github.com>
Date: Sat, 10 Jul 2021 14:12:28 +0200
Subject: [PATCH] Updated Beginner's Guide (English) (markdown)

---
 Beginner's-Guide-(English).md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Beginner's-Guide-(English).md b/Beginner's-Guide-(English).md
index 88d98fe..60b2d1b 100644
--- a/Beginner's-Guide-(English).md
+++ b/Beginner's-Guide-(English).md
@@ -84,7 +84,7 @@ The special menu on this display has a peculiarity: Since this display does not
 
 ## 3. Identification of the mainboard
 
-This section is basically only relevant if you have installed a BLTouch or comparable autoleveling sensor and operate it via the servo connection on the main board. If you have not installed a BLTouch or similar, you can skip this entire section and continue with point 4. However, I still recommend opening your own printer once in order to at least tighten the screws for the main supply lines on the motherboard.
+This section is basically only relevant if you have installed a BLTouch or comparable autoleveling sensor and operate it via the servo connection on the main board. If you do not have installed a BLTouch or similar, you can skip this entire section and continue with point 4. However, I still recommend opening your own printer once in order to at least tighten the screws for the main supply lines on the motherboard.
 
 ### Trigorilla 1.0