From 6e8e898ca22e3a06b36ac09f935c9d9c28aa7cb2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Oliver=20K=C3=B6ster?=
 <36196269+knutwurst@users.noreply.github.com>
Date: Wed, 12 Aug 2020 17:10:52 +0200
Subject: [PATCH] Updated BLTouch Installation (english) (markdown)

---
 BLTouch-Installation-(english).md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/BLTouch-Installation-(english).md b/BLTouch-Installation-(english).md
index 964ce7a..1540731 100644
--- a/BLTouch-Installation-(english).md
+++ b/BLTouch-Installation-(english).md
@@ -146,6 +146,6 @@ Here is the auto-leveling in action:
 
 ## Addendum
 
-If your sensor is in a different place, you can change not only the Z, but also the X and Y offset with the Gcode **M851**.
+If your sensor is in a different place, you can change not only the Z, but also the X and Y offset with the Gcode **M851**. (See: https://marlinfw.org/docs/gcode/M851.html )
 
 In addition, my version of the installation is only one of many. If you're using the servo port for something else, you can also use an adjacent pin. Of course, it has to be adjusted in the firmware. My precompiled firmware versions always refer to the pin assignment I suggested.
\ No newline at end of file