From 7406a7ea1de18af792a4045bd6a9968dd0622480 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Oliver=20K=C3=B6ster?=
 <36196269+knutwurst@users.noreply.github.com>
Date: Tue, 11 Aug 2020 18:15:05 +0200
Subject: [PATCH] Updated BLTouch Installation (english) (markdown)

---
 BLTouch-Installation-(english).md | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/BLTouch-Installation-(english).md b/BLTouch-Installation-(english).md
index 7797b3c..da1b7af 100644
--- a/BLTouch-Installation-(english).md
+++ b/BLTouch-Installation-(english).md
@@ -115,16 +115,16 @@ For the next steps we need the printer, a PC and Pronterface
 5. **G1 X40 Y40 F4000**
 6. **M280 P0 S10**
 7. **G91**
-8. Slowly lower the nozzle with ** G1 Z-1 ** or ** G1 Z-0.1 ** or ** G1 Z-0.02 ** until the sensor is triggered. NOT FURTHER!
-9. If the sensor has triggered and flashes: ** M280 P0 S160 **
-10. **M114** = Current position of the nozzle -> note! (e.g. Recv: X: 40.00 Y: 40.00 Z: 1.30 E: 0.00 Count X: 3200 Y: 3200 Z: 520)
+8. Slowly lower the nozzle with **G1 Z-1** or **G1 Z-0.1** or **G1 Z-0.02** until the sensor is triggered. NOT FURTHER!
+9. If the sensor has triggered and flashes: **M280 P0 S160**
+10. **M114** = Current position of the nozzle -> note! (e.g. Recv: X:40.00 Y:40.00 Z:1.30 E:0.00 Count X:3200 Y:3200 Z:520)
 11. **G90**
-12. **G1 X42 Y65 F4000** (values ​​from point 10 + offset of the sensor, i.e. X = 40 + 2 and Y = 40 + 25)
+12. **G1 X42 Y65 F4000** (values ​​from point 10 + offset of the sensor, i.e. X=40+2 and Y=40+25)
 13. **G91**
 14. Place a sheet of paper under the nozzle
-15. Slowly lower the nozzle with ** G1 Z-1 ** or ** G1 Z-0.1 ** or ** G1 Z-0.02 ** until the paper is difficult to move.
-16. **M114** = Current position of the nozzle -> note! (e.g. Recv: X: 42.00 Y: 65.00 Z: 0.70 E: 0.00 Count X: 3200 Y: 3200 Z: 520)
-17. Subtract the Z value from point 16 from that from point 10 -> 1.30 - 0.7 = ** 0.6 mm ** -> This is our Z offset.
+15. Slowly lower the nozzle with **G1 Z-1** or **G1 Z-0.1** or **G1 Z-0.02** until the paper is difficult to move.
+16. **M114** = Current position of the nozzle -> note! (e.g. Recv: X:42.00 Y:65.00 Z:0.70 E:0.00 Count X:3200 Y:3200 Z:520)
+17. Subtract the Z value from point 16 from that from point 10 -> 1.30 - 0.7 = **0.6 mm** -> This is our Z offset.
 18. **M851 Z-0.6**
 19. **M500**
 20. Carry out BL Touch leveling again via the display. Finished.