From 8269a2a940c27039cad5dbe606239dd1599e44dc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Oliver=20K=C3=B6ster?=
 <36196269+knutwurst@users.noreply.github.com>
Date: Fri, 28 Aug 2020 08:45:05 +0200
Subject: [PATCH] Created Cura Start- and Endcode with preheat and purge line
 (mediawiki)

---
 ...code-with-preheat-and-purge-line.mediawiki | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki

diff --git a/Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki b/Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki
new file mode 100644
index 0000000..3f034da
--- /dev/null
+++ b/Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki
@@ -0,0 +1,38 @@
+*Startcode
+
+ G21                                        ; metric values
+ G90                                        ; absolute positioning
+ M82                                        ; set extruder to absolute mode
+ M107                                       ; start with the fan off
+ M140 S{material_bed_temperature}           ; Start heating the bed
+ G4 S60                                     ; wait 1 minute
+ M104 S{material_print_temperature}         ; start heating the hot end
+ M190 S{material_bed_temperature}           ; wait for bed
+ M109 S{material_print_temperature}         ; wait for Hot end
+ M300 S1000 P500                            ; BEEP heating done
+ G28 X0 Y10 Z0                              ; move X/Y to min endstops
+ M420 S1                                    ; Enable leveling
+ G0 Z0.15                                   ; lift nozzle a bit
+ G0 Y15                                     ; go away from clips
+ G92 E0                                     ; zero the extruded length
+ G1 X50 E25 F500                            ; Extrude 25mm of filament in a 5cm line.
+ G92 E0                                     ; zero the extruded length again
+ G1 E-2 F500                                ; Retract a little
+ G1 X120 F4000                              ; Quickly wipe away from the filament line`
+
+
+*Endcode
+
+ M104 S0                                    ; Extruder off
+ M140 S0                                    ; Heatbed off
+ M107                                       ; Fan off
+ G91                                        ; relative positioning
+ G1 E-5 F300                                ; retract a little
+ G1 Z+10 E-5 ; X-20 Y-20 F{travel_xy_speed} ; lift print head
+ G28 X0 ;Y0                                 ; homing
+ G1 Y180 F2000                              ; reset feedrate
+ M84                                        ; disable stepper motors
+ G90                                        ; absolute positioning
+ M300 S440 P200                             ; Make Print Completed Tones
+ M300 S660 P250                             ; beep
+ M300 S880 P300                             ; beep
\ No newline at end of file