From f2f09048777875e3508fd1c30b7b4f61b222eed2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Oliver=20K=C3=B6ster?= <36196269+knutwurst@users.noreply.github.com> Date: Fri, 16 Apr 2021 09:12:09 +0200 Subject: [PATCH] Updated Types of Anycubic Touchscreens (markdown) --- Types-of-Anycubic-Touchscreens.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Types-of-Anycubic-Touchscreens.md b/Types-of-Anycubic-Touchscreens.md index df872bd..ac2b7ad 100644 --- a/Types-of-Anycubic-Touchscreens.md +++ b/Types-of-Anycubic-Touchscreens.md @@ -6,9 +6,9 @@ - Right: The "new" Anycubic 0.0.2 Mega S and Mega P TFT, which was introduced in Mid 2020. Almost the same Interface like the DGUS II, but without animated Buttons. It's also closed source, based on a STM32F103 single core ARM Microcontroller. Maybe a DGUS Clone. It also has a filename sanitizer built in, which does not allow displaying anything else but gcode files. -**Update 03/2021: The Anycubic 0.0.2 TFT is also used in the newer MEGA X and latest CHIRON Model! If you have a Mega X or Chiron and the Special Menu is not shown, use the MEGA_X_DGUS / CHIRON_DGUS Release.** +**Update 03/2021:** The Anycubic 0.0.2 TFT is also used in the newer MEGA X and latest CHIRON Model! If you have a Mega X or Chiron and the Special Menu is not shown, use the MEGA_X_DGUS / CHIRON_DGUS Release. -**Update 04/2021: It might be, that your MEGA X TFT gets stuck sometimes or plays some music. In that case you might need a [Firmware Update](https://drive.google.com/file/d/1Y_tDP4uFZ7ubmWo6Uhsh19vA4Wg1v6ij/). Just extract the zip and put the DWIN_SET Folder onto a MicroSD card. Put it into the card slot on the back of your TFT and boot up your printer. The Update takes place automatically.** +**Update 04/2021:** It might be, that your MEGA X TFT gets stuck sometimes or plays some music. In that case you might need a [Firmware Update](https://drive.google.com/file/d/1Y_tDP4uFZ7ubmWo6Uhsh19vA4Wg1v6ij/). Just extract the zip and put the DWIN_SET Folder onto a MicroSD card. Put it into the card slot on the back of your TFT and boot up your printer. The Update takes place automatically. [[ https://raw.githubusercontent.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/master/images/anycubic_touchscreen_front.jpg | width = 1000px ]]