From faabbfb324e27f795f4a9449d96aebb9a837f0de Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Oliver=20K=C3=B6ster?=
 <36196269+knutwurst@users.noreply.github.com>
Date: Mon, 20 Sep 2021 09:56:15 +0200
Subject: [PATCH] Updated Cura Start  and Endcode with preheat and purge line
 (mediawiki)

---
 ...tart--and-Endcode-with-preheat-and-purge-line.mediawiki | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki b/Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki
index 9432943..65871ac 100644
--- a/Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki
+++ b/Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki
@@ -6,11 +6,8 @@ For more information about every single Line, please visit https://marlinfw.org/
  G90                                        ; absolute positioning
  M82                                        ; set extruder to absolute mode
  M107                                       ; start with the fan off
- M140 S{material_bed_temperature}           ; Start heating the bed
- G4 S60                                     ; wait 1 minute
- M104 S{material_print_temperature}         ; start heating the hot end
- M190 S{material_bed_temperature}           ; wait for bed
- M109 S{material_print_temperature}         ; wait for hotend
+ M190 S{material_bed_temperature}           ; preheat and wait for bed
+ M109 S{material_print_temperature}         ; preheat and wait for hotend
  M300 S1000 P500                            ; BEEP heating done
  G28 X0 Y10 Z0                              ; move X/Y to min endstops
  M420 S1                                    ; Enable leveling