19 lines
1.4 KiB
Plaintext
19 lines
1.4 KiB
Plaintext
|
This is the configuration file for Marlin 1.1.8 for the Anycubic i3 Mega Ultrabase with Trigorilla 8 bit mainboard.
|
||
|
|
Please note that there are also i3 Mega Ultrabase printers with a 32 bit board. Marlin 8 bit can not be flashed on those boards!
|
||
|
|
|
||
|
|
Navigate to the info screen on the TFT display, it tells you which version you have. Firmware V1.1.1 = 8 bit Marlin
|
||
|
|
and V1.4 is 32 bit 'something' firmware. You can also check by opening the case at the bottom and inspecting the motherboard.
|
||
|
|
If you have replaceable drivers, it's probably 8 bit Marlin. Intregraded stepper drivers = 32 bit (and Trigorilla Pro logo)
|
||
|
|
Probably, bacause you never know what they change....
|
||
|
|
|
||
|
|
Simply download this repository to your PC, and replace this configuration.h with the one in the Marlin folder.
|
||
|
|
Then compile and upload to your printer.
|
||
|
|
|
||
|
|
After you upload the firmware to the printer, restart it first. Then verify all axis movements via the menu with the smallest steps.
|
||
|
|
Then check homing all axis individually. For the z axis test homing by pressing both endstop switches yourself,
|
||
|
|
if they dont work you can turn off the printer in time. If something isn't working as expected, check configuration.h again
|
||
|
|
and make necessary adjustments.
|
||
|
|
|
||
|
|
Manual Mesh Bed levelling is enabled by default. Read about it here: http://marlinfw.org/docs/gcode/G029-mbl.html
|
||
|
|
and/ or here: https://github.com/MarlinFirmware/Marlin/wiki/Manual-Mesh-Bed-Leveling.
|