wp
/
Marlin-Ai3M
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Marlin-Ai3M/Marlin/language_da.h

250 lines
14 KiB
C
Raw Normal View History

Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 03:32:01 -06:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Danish
*
* LCD Menu Messages
* See also http://marlinfw.org/docs/development/lcd_language.html
*
*/
#ifndef LANGUAGE_DA_H
#define LANGUAGE_DA_H
#define MAPPER_C2C3
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME _UxGT(" er klar")
#define MSG_SD_INSERTED _UxGT("Kort isat")
#define MSG_SD_REMOVED _UxGT("Kort fjernet")
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#define MSG_MAIN _UxGT("Menu")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Slå alle steppere fra")
#define MSG_AUTO_HOME _UxGT("Auto Home") // G28
#define MSG_AUTO_HOME_X _UxGT("Home X")
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Klik når du er klar")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Næste punkt")
#define MSG_LEVEL_BED_DONE _UxGT("Bed level er færdig!")
#define MSG_SET_HOME_OFFSETS _UxGT("Sæt forsk. af home")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Forsk. er nu aktiv")
#define MSG_SET_ORIGIN _UxGT("Sæt origin")
#define MSG_PREHEAT_1 _UxGT("Forvarm PLA")
#define MSG_PREHEAT_1_N _UxGT("Forvarm PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Forvarm PLA Alle")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Forvarm PLA Bed")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Forvarm PLA conf")
#define MSG_PREHEAT_2 _UxGT("Forvarm ABS")
#define MSG_PREHEAT_2_N _UxGT("Forvarm ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Forvarm ABS Alle")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Forvarm ABS Bed")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Forvarm ABS conf")
#define MSG_COOLDOWN _UxGT("Afkøl")
#define MSG_SWITCH_PS_ON _UxGT("Slå strøm til")
#define MSG_SWITCH_PS_OFF _UxGT("Slå strøm fra")
#define MSG_EXTRUDE _UxGT("Extruder")
#define MSG_RETRACT _UxGT("Retract")
#define MSG_MOVE_AXIS _UxGT("Flyt akser")
#define MSG_BED_LEVELING _UxGT("Juster bed")
#define MSG_LEVEL_BED _UxGT("Juster bed")
#define MSG_MOVE_X _UxGT("Flyt X")
#define MSG_MOVE_Y _UxGT("Flyt Y")
#define MSG_MOVE_Z _UxGT("Flyt Z")
#define MSG_MOVE_E _UxGT("Extruder")
#define MSG_MOVE_01MM _UxGT("Flyt 0.1mm")
#define MSG_MOVE_1MM _UxGT("Flyt 1mm")
#define MSG_MOVE_10MM _UxGT("Flyt 10mm")
#define MSG_SPEED _UxGT("Hastighed")
#define MSG_BED_Z _UxGT("Plade Z")
#define MSG_NOZZLE _UxGT("Dyse")
#define MSG_BED _UxGT("Plade")
#define MSG_FAN_SPEED _UxGT("Blæser hastighed")
#define MSG_FLOW _UxGT("Flow")
#define MSG_CONTROL _UxGT("Kontrol")
#define MSG_MIN _UxGT(" \002 Min")
#define MSG_MAX _UxGT(" \002 Max")
#define MSG_FACTOR _UxGT(" \002 Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_ON _UxGT("Til ")
#define MSG_OFF _UxGT("Fra")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Vælg")
#define MSG_ACC _UxGT("Accel")
#define MSG_JERK _UxGT("Jerk")
Merge Marlin 1.1.8
2019-01-31 05:25:28 -06:00
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 03:32:01 -06:00
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_A_TRAVEL _UxGT("A-rejse")
#define MSG_STEPS_PER_MM _UxGT("Steps/mm")
Merge Marlin 1.1.8
2019-01-31 05:25:28 -06:00
#define MSG_XSTEPS _UxGT("Xsteps/mm")
#define MSG_YSTEPS _UxGT("Ysteps/mm")
#define MSG_ZSTEPS _UxGT("Zsteps/mm")
Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 03:32:01 -06:00
#define MSG_ESTEPS _UxGT("Esteps/mm")
#define MSG_E1STEPS _UxGT("E1steps/mm")
#define MSG_E2STEPS _UxGT("E2steps/mm")
#define MSG_E3STEPS _UxGT("E3steps/mm")
#define MSG_E4STEPS _UxGT("E4steps/mm")
#define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperatur")
#define MSG_MOTION _UxGT("Bevægelse")
#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E i mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("LCD kontrast")
#define MSG_STORE_EEPROM _UxGT("Gem i EEPROM")
#define MSG_LOAD_EEPROM _UxGT("Hent fra EEPROM")
#define MSG_RESTORE_FAILSAFE _UxGT("Gendan failsafe")
#define MSG_REFRESH _UxGT("Genopfrisk")
#define MSG_WATCH _UxGT("Info skærm")
#define MSG_PREPARE _UxGT("Forbered")
#define MSG_TUNE _UxGT("Tune")
#define MSG_PAUSE_PRINT _UxGT("Pause printet")
#define MSG_RESUME_PRINT _UxGT("Forsæt printet")
#define MSG_STOP_PRINT _UxGT("Stop printet")
#define MSG_CARD_MENU _UxGT("Print fra SD")
#define MSG_NO_CARD _UxGT("Intet SD kort")
#define MSG_DWELL _UxGT("Dvale...")
#define MSG_USERWAIT _UxGT("Venter på bruger...")
Merge Marlin 1.1.8
2019-01-31 05:25:28 -06:00
#define MSG_RESUMING _UxGT("Forsætter printet")
Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 03:32:01 -06:00
#define MSG_PRINT_ABORTED _UxGT("Print annulleret")
#define MSG_NO_MOVE _UxGT("Ingen bevægelse.")
#define MSG_KILLED _UxGT("DRÆBT. ")
#define MSG_STOPPED _UxGT("STOPPET. ")
#define MSG_CONTROL_RETRACT _UxGT("Tilbagetræk mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Skift Re.mm")
#define MSG_CONTROL_RETRACTF _UxGT("Tilbagetræk V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Skift UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#define MSG_FILAMENTCHANGE _UxGT("Skift filament")
#define MSG_INIT_SDCARD _UxGT("Init. SD card")
#define MSG_CNG_SDCARD _UxGT("Skift SD kort")
#define MSG_ZPROBE_OUT _UxGT("Probe udenfor plade")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Selv-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("først")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
#define MSG_HEATING_FAILED_LCD _UxGT("Opvarmning fejlet")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Fejl: reserve temp")
#define MSG_THERMAL_RUNAWAY _UxGT("Temp løber løbsk")
#define MSG_ERR_MAXTEMP _UxGT("Fejl: Maks temp")
#define MSG_ERR_MINTEMP _UxGT("Fejl: Min temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Fejl: Maks Plade temp")
#define MSG_ERR_MINTEMP_BED _UxGT("Fejl: Min Plade temp")
Merge Marlin 1.1.8
2019-01-31 05:25:28 -06:00
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbudt")
Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 03:32:01 -06:00
#define MSG_HALTED _UxGT("PRINTER STOPPET")
#define MSG_PLEASE_RESET _UxGT("Reset Venligst")
#define MSG_SHORT_DAY _UxGT("d") // Kun et bogstav
#define MSG_SHORT_HOUR _UxGT("h") // Kun et bogstav
#define MSG_SHORT_MINUTE _UxGT("m") // Kun et bogstav
#define MSG_HEATING _UxGT("Opvarmer...")
Merge Marlin 1.1.8
2019-01-31 05:25:28 -06:00
#define MSG_HEATING_COMPLETE _UxGT("Opvarmet")
#define MSG_BED_HEATING _UxGT("Opvarmer plade")
#define MSG_BED_DONE _UxGT("Plade opvarmet")
Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 03:32:01 -06:00
#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrering")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrer X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrer Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrer Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrerings Center")
#define MSG_INFO_MENU _UxGT("Om Printer")
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
#define MSG_INFO_BOARD_MENU _UxGT("Kort Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Ant. Prints")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Færdige")
#define MSG_INFO_PRINT_TIME _UxGT("Total print tid")
#define MSG_INFO_PRINT_LONGEST _UxGT("Længste print")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Total Extruderet")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Prints")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Færdige")
#define MSG_INFO_PRINT_TIME _UxGT("Total")
#define MSG_INFO_PRINT_LONGEST _UxGT("Længste")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruderet")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Strømfors.")
#define MSG_DRIVE_STRENGTH _UxGT("Driv Styrke")
#define MSG_DAC_PERCENT _UxGT("Driv %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Skriv")
Merge Marlin 1.1.8
2019-01-31 05:25:28 -06:00
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruder mere")
Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 03:32:01 -06:00
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Forsæt print")
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent på start")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("af filament")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("skift")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vent på")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament udskyd.")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("og tryk på knap")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("for at fortsætte...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Vent på")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament indtag")
Merge Marlin 1.1.8
2019-01-31 05:25:28 -06:00
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vent på")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrudering")
Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 03:32:01 -06:00
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Vent på at print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("fortsætter")
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent venligst...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Udskyder...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt og klik")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Indtager...")
Merge Marlin 1.1.8
2019-01-31 05:25:28 -06:00
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudere...")
Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 03:32:01 -06:00
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsætter...")
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_DA_H