wp
/
Marlin-Ai3M
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Add precompiled hex

This commit is contained in:
David Ramiro 2018-11-16 20:15:02 +01:00
parent b80797bee5
commit 003e93652a
No known key found for this signature in database
GPG Key ID: 5B042737EBEEB736
3 changed files with 6612 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6598
Marlin-AI3M-181116-flipped.hex Normal file
View File

File diff suppressed because it is too large Load Diff

0
Marlin-AI3M-201811156.hex → Marlin-AI3M-181116.hex
View File

17
README.md
View File

@ -5,7 +5,7 @@ This is my slightly customized version of the [Marlin Firmware](https://github.c
I am running this version on an i3 Mega Ultrabase V3 (for distinction of the different versions, check [this Thingiverse thread](https://www.thingiverse.com/groups/anycubic-i3-mega/forums/general/topic:27064)) with FYSETC TMC2208 V1.2 installed. I am running this version on an i3 Mega Ultrabase V3 (for distinction of the different versions, check [this Thingiverse thread](https://www.thingiverse.com/groups/anycubic-i3-mega/forums/general/topic:27064)) with FYSETC TMC2208 V1.2 installed.
Basically, this should work on every Ultrabase version that has no bed leveling sensor and two Z-axis endstops. Basically, this should work on every Ultrabase version that has no bed leveling sensor and two Z-axis endstops.
#### Why use this? ### Why use this?
While the i3 Mega is a great printer for it's price and produces fantastic results in stock, there are some issues that are easily addressed: While the i3 Mega is a great printer for it's price and produces fantastic results in stock, there are some issues that are easily addressed:
@ -15,7 +15,9 @@ While the i3 Mega is a great printer for it's price and produces fantastic resul
- Fairly loud fans, while almost every one of them is easily replaced, the stock FW only gives out 9V instead of 12V on the parts cooling fan so some fans like Noctua don't run like they should. This is fixed in this firmware. - Fairly loud fans, while almost every one of them is easily replaced, the stock FW only gives out 9V instead of 12V on the parts cooling fan so some fans like Noctua don't run like they should. This is fixed in this firmware.
- Thermal runaway protection: Reducing fire risk by detecting a faulty or misaligned thermistor. - Thermal runaway protection: Reducing fire risk by detecting a faulty or misaligned thermistor.
#### How to flash this? ### How to flash this?
#### Compile it yourself:
- Download Arduino IDE - Download Arduino IDE
- Clone or download this repo - Clone or download this repo
@ -23,6 +25,15 @@ While the i3 Mega is a great printer for it's price and produces fantastic resul
- Open Marlin.ino in the Marlin directory of this repo - Open Marlin.ino in the Marlin directory of this repo
- Customize if needed and under `Sketch`, select `Export compiled binary` - Customize if needed and under `Sketch`, select `Export compiled binary`
- Look for the .hex file in your temporary directory, e.g. `.../AppData/Local/Temp/arduino_build_xxx/` (only the `Marlin.ino.hex`, not the `Marlin.ino.with_bootloader.hex`!) - Look for the .hex file in your temporary directory, e.g. `.../AppData/Local/Temp/arduino_build_xxx/` (only the `Marlin.ino.hex`, not the `Marlin.ino.with_bootloader.hex`!)
#### Or download precompiled hex:
- Choose the correct hex file:
- For TMC2208 with flipped connectors, use `Marlin-AI3M-XXXXXX-flipped.hex`
- For TMC2208 with connectors in original orientation, use `Marlin-AI3M-XXXXXX.hex`
#### After flashing:
- Flash the hex with Cura, OctoPrint or similar - Flash the hex with Cura, OctoPrint or similar
- Connect to the printer and send the following commands: - Connect to the printer and send the following commands:
- `G502` - load hard coded default values - `G502` - load hard coded default values
@ -77,7 +88,7 @@ While the i3 Mega is a great printer for it's price and produces fantastic resul
### About Marlin ## About Marlin
<img align="right" src="../../raw/1.1.x/buildroot/share/pixmaps/logo/marlin-250.png" /> <img align="right" src="../../raw/1.1.x/buildroot/share/pixmaps/logo/marlin-250.png" />