diff --git a/Marlin/AnycubicTFT.cpp b/Marlin/AnycubicTFT.cpp index 74ffa60..9f9562e 100644 --- a/Marlin/AnycubicTFT.cpp +++ b/Marlin/AnycubicTFT.cpp @@ -136,21 +136,59 @@ void AnycubicTFTClass::KillTFT() void AnycubicTFTClass::StartPrint(){ - if (TFTstate==ANYCUBIC_TFT_STATE_SDPAUSE) { -#ifndef ADVANCED_PAUSE_FEATURE - enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-10 F240\nG90")); -#endif + if (TFTstate==ANYCUBIC_TFT_STATE_SDPAUSE) { // resuming from SD pause + if((PausedByRunout==false)) // was that a regular pause? + { + enqueue_and_echo_commands_P(PSTR("G91\nG1 E7 F1800\nG90")); // feed 7mm + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-10 F240\nG90")); // lower nozzle again + + } } starttime=millis(); #ifdef SDSUPPORT - card.startFileprint(); + if((PausedByRunout==false)) // was that a regular pause? + { + card.startFileprint(); // start or resume regularly + } + else // resuming from a pause that was caused by filament runout + { + enqueue_and_echo_commands_P(PSTR("M24")); // unpark nozzle and resume +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("DEBUG: M24 Resume from Filament Runout"); +#endif + PausedByRunout=false; // clear flag +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("DEBUG: Filament Pause Flag cleared"); +#endif + } #endif TFTstate=ANYCUBIC_TFT_STATE_SDPRINT; } void AnycubicTFTClass::PausePrint(){ #ifdef SDSUPPORT - card.pauseSDPrint(); + if((PausedByRunout==false)) // is this a regular pause? + { + card.pauseSDPrint(); // pause print regularly +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("DEBUG: Regular Pause"); +#endif + } + else // pause caused by filament runout + { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("DEBUG: Filament Runout Pause"); +#endif + enqueue_and_echo_commands_P(PSTR("M25")); // pause print and park nozzle +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("DEBUG: M25 sent, parking nozzle"); +#endif + ANYCUBIC_SERIAL_PROTOCOLPGM("J23"); //J23 FILAMENT LACK with the prompt box don't disappear + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("DEBUG: J23 OOF prompt"); +#endif + } #endif TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE_REQ; #ifdef ANYCUBIC_FILAMENT_RUNOUT_SENSOR @@ -450,9 +488,22 @@ void AnycubicTFTClass::StateHandler() #ifdef SDSUPPORT if((!card.sdprinting) && (!planner.movesplanned())) { // We have to wait until the sd card printing has been settled -#ifndef ADVANCED_PAUSE_FEATURE - enqueue_and_echo_commands_P(PSTR("G91\nG1 Z10 F240\nG90")); + if((PausedByRunout==false)) + { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("DEBUG: Regular Pause requested"); #endif + enqueue_and_echo_commands_P(PSTR("G91\nG1 E-7 F1800\nG90")); // retract 7mm + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z10 F240\nG90")); // lift nozzle + } else { + enqueue_and_echo_commands_P(PSTR("G91\nG1 E-7 F1800\nG90")); // retract 7mm + enqueue_and_echo_commands_P(PSTR("M300 S1567 P750\nM300 S2093 P750")); + enqueue_and_echo_commands_P(PSTR("M300 S1567 P750\nM300 S2093 P750")); + enqueue_and_echo_commands_P(PSTR("M300 S1567 P750\nM300 S2093 P750")); // alert user with beeps + #ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("DEBUG: Beep-boop"); + #endif + } #ifdef ANYCUBIC_FILAMENT_RUNOUT_SENSOR if(FilamentTestStatus) { TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; @@ -480,7 +531,7 @@ void AnycubicTFTClass::StateHandler() #endif if((current_position[Z_AXIS]<150)) { enqueue_and_echo_commands_P(PSTR("G91")); - enqueue_and_echo_commands_P(PSTR("G1 Z10 F240")); + enqueue_and_echo_commands_P(PSTR("G1 Z20 F240")); enqueue_and_echo_commands_P(PSTR("G90")); } else if ((current_position[Z_AXIS]<190)) { enqueue_and_echo_commands_P(PSTR("G91")); @@ -518,6 +569,10 @@ void AnycubicTFTClass::FilamentRunout() #ifdef SDSUPPORT if((card.sdprinting==true)) { + PausedByRunout=true; // set runout pause flag +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("DEBUG: Filament Pause Flag set"); +#endif PausePrint(); } else if((card.sdprinting==false)) diff --git a/Marlin/AnycubicTFT.h b/Marlin/AnycubicTFT.h index e3d6065..55d6865 100644 --- a/Marlin/AnycubicTFT.h +++ b/Marlin/AnycubicTFT.h @@ -104,6 +104,7 @@ private: char FilamentTestStatus=false; char FilamentTestLastStatus=false; long FilamentRunoutCounter=0; + char PausedByRunout=false; #endif }; diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index c38f718..a39a0e3 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1937,6 +1937,6 @@ // Enable Anycubic TFT #define ANYCUBIC_TFT_MODEL #define ANYCUBIC_FILAMENT_RUNOUT_SENSOR -//#define ANYCUBIC_TFT_DEBUG +#define ANYCUBIC_TFT_DEBUG #endif // CONFIGURATION_H diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index e8ff06b..25fc2e4 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -994,12 +994,12 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 530 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 538 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 10 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 2 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 2 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. diff --git a/README.md b/README.md index 1614d4b..3382c04 100644 --- a/README.md +++ b/README.md @@ -161,7 +161,7 @@ G26 C H200 P25 R25 #### Configuration: - Send `M603 L0 U0` to use manual loading & unloading. -- Send `M603 L530 U555` to use automatic loading & unloading +- Send `M603 L538 U555` to use automatic loading & unloading - Save with `M500` #### Filament change process (manual loading):