Merge Marlin 1.1.8

Marlin/pins_TRIGORILLA.h

@@ -0,0 +1,207 @@
+//ANYCUBIC TRIGORILLA MAINBOARD
+#ifndef __AVR_ATmega2560__
+	#error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+#endif
+
+#define BOARD_NAME         "TRIGORILLA"
+#define LARGE_FLASH        true
+
+// Misc PINs
+#define BUZZER 			   31
+#define SDPOWER            -1
+#define SDSS               53
+#define LED_PIN            13
+#define Z_MIN_PROBE_PIN     2
+#define FIL_RUNOUT_PIN	   19
+
+#ifdef OutageTest
+	#define OUTAGETEST_PIN  79
+	#define OUTAGECON_PIN   58
+#endif
+
+// Steppers
+#define X_STEP_PIN         54
+#define X_DIR_PIN          55
+#define X_ENABLE_PIN       38
+
+#define Y_STEP_PIN         60
+#define Y_DIR_PIN          61
+#define Y_ENABLE_PIN       56
+
+#define Y2_STEP_PIN        36
+#define Y2_DIR_PIN         34
+#define Y2_ENABLE_PIN      30
+
+#define Z_STEP_PIN         46
+#define Z_DIR_PIN          48
+#define Z_ENABLE_PIN       62
+
+#define Z2_STEP_PIN        36
+#define Z2_DIR_PIN         34
+#define Z2_ENABLE_PIN      30
+
+#define E0_STEP_PIN        26
+#define E0_DIR_PIN         28
+#define E0_ENABLE_PIN      24
+
+// EndStops
+#define X_MIN_PIN           3
+#define Y_MIN_PIN          42
+#define Z_MIN_PIN          18
+
+#define X_MAX_PIN          43
+#define Y_MAX_PIN          -1 
+#define Z_MAX_PIN          -1
+
+// Fans
+#define FAN_PIN             9
+#define FAN2_PIN           44
+#define CONTROLLER_FAN_PIN  7
+
+// Heaters
+#define HEATER_0_PIN       10
+#define HEATER_1_PIN       45
+#define HEATER_BED_PIN      8
+
+// Temperatursensoren
+#define TEMP_0_PIN         13
+#define TEMP_1_PIN         15
+#define TEMP_2_PIN         12
+#define TEMP_BED_PIN       14
+
+// Servos
+#ifdef NUM_SERVOS
+	#define SERVO0_PIN      11
+	
+	#if NUM_SERVOS > 1
+		#define SERVO1_PIN    6
+	#endif
+	
+	#if NUM_SERVOS > 2
+		#define SERVO2_PIN    5
+	#endif
+	
+	#if NUM_SERVOS > 3
+		#define SERVO3_PIN    4
+	#endif
+#endif	
+
+#if defined(ANYCUBIC_TFT_MODEL)
+  #define BEEPER_PIN       31
+  #define SD_DETECT_PIN    49
+#endif
+
+// LCD
+#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) || defined(ANYCUBIC_TFT_MODEL)
+	#define KILL_PIN        41
+#else
+	#define KILL_PIN        -1
+#endif
+
+#ifdef ULTRA_LCD
+	#ifdef NEWPANEL
+		#define LCD_PINS_RS 16
+		#define LCD_PINS_ENABLE 17
+		#define LCD_PINS_D4 23
+		#define LCD_PINS_D5 25
+		#define LCD_PINS_D6 27
+		#define LCD_PINS_D7 29
+		
+		#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
+			#define BEEPER_PIN 31
+			
+			#define BTN_EN1 33
+			#define BTN_EN2 33
+			#define BTN_ENC 35
+			
+			#define SD_DETECT_PIN 49
+			#elif defined(LCD_I2C_PANELOLU2)
+				#define BTN_EN1 47  //reverse if the encoder turns the wrong way.
+				#define BTN_EN2 43
+				#define BTN_ENC 32
+				#define SDSS 53
+				#define SD_DETECT_PIN -1
+				#define KILL_PIN 41
+			#elif defined(LCD_I2C_VIKI)
+				#define BTN_EN1 22  //reverse if the encoder turns the wrong way.
+				#define BTN_EN2 7
+				#define BTN_ENC -1
+				#define SDSS 53
+				#define SD_DETECT_PIN 49
+			#elif defined(FULL_GRAPHIC_SMALL_PANEL)
+				#define BEEPER_PIN 37
+
+				// Pins for DOGM SPI LCD Support
+				#define DOGLCD_A0  23
+				#define DOGLCD_CS  27
+				#define LCD_PIN_BL	25	// backlight LED on PA3
+
+				#define KILL_PIN 41
+				// GLCD features
+				//#define LCD_CONTRAST 190
+				// Uncomment screen orientation
+				// #define LCD_SCREEN_ROT_90
+				// #define LCD_SCREEN_ROT_180
+				// #define LCD_SCREEN_ROT_270
+				//The encoder and click button
+				#define BTN_EN1 33
+				#define BTN_EN2 -1
+				#define BTN_ENC 35  //the click switch
+				//not connected to a pin
+				#define SD_DETECT_PIN 49
+			#elif defined(MULTIPANEL)
+				//         #define BEEPER_PIN 37
+				// Pins for DOGM SPI LCD Support
+				#define DOGLCD_A0  17
+				#define DOGLCD_CS  16
+				#define LCD_PIN_BL	23	// backlight LED on A11/D65
+				#define SDSS   53
+
+				#define KILL_PIN 64
+				// GLCD features
+				//#define LCD_CONTRAST 190
+				// Uncomment screen orientation
+				// #define LCD_SCREEN_ROT_90
+				// #define LCD_SCREEN_ROT_180
+				// #define LCD_SCREEN_ROT_270
+				//The encoder and click button
+				#define BTN_EN1 -1
+				#define BTN_EN2 33
+				#define BTN_ENC 35  //the click switch
+				//not connected to a pin
+				#define SD_DETECT_PIN 49
+			#else
+				//arduino pin which triggers an piezzo beeper
+				#define BEEPER_PIN 31  // Beeper on AUX-4
+			
+			//buttons are directly attached using AUX-2
+			#ifdef REPRAPWORLD_KEYPAD
+				#define BTN_EN1 64 // encoder
+				#define BTN_EN2 59 // encoder
+				#define BTN_ENC 63 // enter button
+				#define SHIFT_OUT 40 // shift register
+				#define SHIFT_CLK 44 // shift register
+				#define SHIFT_LD 42 // shift register
+				#else
+				#define BTN_EN1 37
+				#define BTN_EN2 35
+				#define BTN_ENC -1  //the click
+			#endif
+			
+			#ifdef G3D_PANEL
+				#define SD_DETECT_PIN 49
+				#else
+				#define SD_DETECT_PIN -1  // Ramps does not use this port
+			#endif
+			
+		#endif
+		
+		#define LCD_PINS_RS 16
+		#define LCD_PINS_ENABLE 17
+		#define LCD_PINS_D4 23
+		#define LCD_PINS_D5 25
+		#define LCD_PINS_D6 27
+		#define LCD_PINS_D7 29
+		
+	#endif
+#endif