Fix for Travis CI and adjust tests
This commit is contained in:
David Ramiro
parent
6deb88102b
commit
625e264dfc
309
.travis.yml
309
.travis.yml
|
|
@ -75,315 +75,26 @@ script:
|
|||
#
|
||||
- cp Marlin/Configuration.h Marlin/Configuration.h.backup
|
||||
- cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup
|
||||
- cp Marlin/pins_RAMPS.h Marlin/pins_RAMPS.h.backup
|
||||
- cp Marlin/pins_TRIGORILLA_14.h Marlin/pins_TRIGORILLA_14.h.backup
|
||||
#
|
||||
# Build with the default configurations
|
||||
#
|
||||
- build_marlin
|
||||
#
|
||||
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
|
||||
# Test a "Fix Mounted" Probe with Safe Homing, some arc options,
|
||||
# linear bed leveling, M48, leveling debug, and firmware retraction.
|
||||
#
|
||||
- opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_set TEMP_SENSOR_0 -2
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_set POWER_SUPPLY 1
|
||||
- opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING
|
||||
- opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
|
||||
- opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
- opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE
|
||||
- opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
|
||||
- opt_set GRID_MAX_POINTS_X 16
|
||||
- opt_set_adv FANMUX0_PIN 53
|
||||
- build_marlin
|
||||
#
|
||||
# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
- opt_set EXTRUDERS 5
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_set TEMP_SENSOR_2 5
|
||||
- opt_set TEMP_SENSOR_3 20
|
||||
- opt_set TEMP_SENSOR_4 999
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION MAX7219_DEBUG
|
||||
- opt_set_adv MAX7219_ROTATE 270
|
||||
- build_marlin
|
||||
#
|
||||
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
|
||||
#
|
||||
- opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE S_CURVE_ACCELERATION
|
||||
- opt_set LCD_LANGUAGE kana_utf8
|
||||
- opt_disable SEGMENT_LEVELED_MOVES
|
||||
- opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING
|
||||
- build_marlin
|
||||
#
|
||||
# Test a Servo Probe
|
||||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
- opt_set NUM_SERVOS 1
|
||||
- opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
- opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
|
||||
- build_marlin
|
||||
#
|
||||
# Test MESH_BED_LEVELING feature, with LCD
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- build_marlin
|
||||
#
|
||||
# Test MINIRAMBO for PWM_MOTOR_CURRENT
|
||||
# PROBE_MANUALLY feature, with LCD support,
|
||||
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
|
||||
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
|
||||
# Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
|
||||
# ADVANCED_PAUSE_FEATURE, ADVANCED_PAUSE_CONTINUOUS_PURGE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU, M114_DETAIL
|
||||
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
|
||||
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_MINIRAMBO
|
||||
- opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
- opt_enable ULTIMAKERCONTROLLER SDSUPPORT
|
||||
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
|
||||
- opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
|
||||
- opt_enable_adv ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
|
||||
- opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250}
|
||||
- opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
- build_marlin
|
||||
#
|
||||
# Mixing Extruder with 5 steppers, Cyrillic
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
- opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY
|
||||
- opt_set MIXING_STEPPERS 5
|
||||
- opt_set LCD_LANGUAGE ru
|
||||
- build_marlin
|
||||
#
|
||||
# Test DUAL_X_CARRIAGE
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RUMBA
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_enable USE_XMAX_PLUG
|
||||
- opt_enable_adv DUAL_X_CARRIAGE
|
||||
- build_marlin
|
||||
#
|
||||
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
|
||||
#- opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
|
||||
#- opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
|
||||
#- opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RUMBA
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_enable NUM_SERVOS
|
||||
- opt_set NUM_SERVOS 1
|
||||
- opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
- build_marlin
|
||||
#
|
||||
# Enable COREXY
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable COREXY
|
||||
#- build_marlin
|
||||
#
|
||||
# Test many less common options
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable COREYX
|
||||
- opt_set_adv FAN_MIN_PWM 50
|
||||
- opt_set_adv FAN_KICKSTART_TIME 100
|
||||
- opt_set_adv XY_FREQUENCY_LIMIT 15
|
||||
- opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME
|
||||
- opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK
|
||||
- opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
|
||||
- opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
- opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
- opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
|
||||
- opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT
|
||||
- opt_enable USE_XMAX_PLUG
|
||||
- build_marlin
|
||||
#
|
||||
######## Other Standard LCD/Panels ##############
|
||||
#
|
||||
# ULTRA_LCD
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable ULTRA_LCD
|
||||
#- build_marlin
|
||||
#
|
||||
# DOGLCD
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable DOGLCD
|
||||
#- build_marlin
|
||||
#
|
||||
# MAKRPANEL
|
||||
# Needs to use Melzi and Sanguino hardware
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable MAKRPANEL
|
||||
#- build_marlin
|
||||
#
|
||||
# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
|
||||
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
#- build_marlin
|
||||
# #
|
||||
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable G3D_PANEL SDSUPPORT
|
||||
#- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
|
||||
#- opt_set_adv SDSORT_GCODE true
|
||||
#- opt_set_adv SDSORT_USES_RAM true
|
||||
#- opt_set_adv SDSORT_USES_STACK true
|
||||
#- opt_set_adv SDSORT_CACHE_NAMES true
|
||||
#- build_marlin
|
||||
#
|
||||
# REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with LIGHTWEIGHT_UI
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
|
||||
- opt_set_adv SDSORT_GCODE true
|
||||
- opt_set_adv SDSORT_USES_RAM true
|
||||
- opt_set_adv SDSORT_USES_STACK true
|
||||
- opt_set_adv SDSORT_CACHE_NAMES true
|
||||
- build_marlin
|
||||
#
|
||||
# REPRAPWORLD_KEYPAD
|
||||
#
|
||||
# Cant find configuration details to get it to compile
|
||||
#- restore_configs
|
||||
#- opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
|
||||
#- build_marlin
|
||||
#
|
||||
# RA_CONTROL_PANEL
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
|
||||
#- build_marlin
|
||||
#
|
||||
######## I2C LCD/PANELS ##############
|
||||
#
|
||||
# !!!ATTENTION!!!
|
||||
# Most I2C configurations are failing at the moment because they require
|
||||
# a different Liquid Crystal library "LiquidTWI2".
|
||||
#
|
||||
# LCD_SAINSMART_I2C_1602
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCD_SAINSMART_I2C_1602
|
||||
#- build_marlin
|
||||
#
|
||||
# LCD_I2C_PANELOLU2
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCD_I2C_PANELOLU2
|
||||
#- build_marlin
|
||||
#
|
||||
# LCD_I2C_VIKI
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCD_I2C_VIKI
|
||||
#- build_marlin
|
||||
#
|
||||
# LCM1602
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCM1602
|
||||
#- build_marlin
|
||||
#
|
||||
# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
|
||||
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin
|
||||
#
|
||||
#
|
||||
|
||||
######## Example Configurations ##############
|
||||
#
|
||||
# BQ Hephestos 2
|
||||
#- restore_configs
|
||||
#- use_example_configs Hephestos_2
|
||||
#- build_marlin
|
||||
# Anycubic i3 Mega with BLtouch
|
||||
#
|
||||
# Delta Config (generic) + ABL bilinear + PROBE_MANUALLY
|
||||
- use_example_configs delta/generic
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
|
||||
#- Test compatibility to https://github.com/MNieddu91/Marlin-AI3M-BLTouch
|
||||
#
|
||||
- use_example_configs Anycubic/Ai3MBLtouch
|
||||
- build_marlin
|
||||
#
|
||||
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
|
||||
# Anycubic i3 Mega with 12864 display
|
||||
#
|
||||
- use_example_configs delta/generic
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
- opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
|
||||
#- Test compatibility to RepRapDiscount FULL GRAPHIC Smart Controller
|
||||
#
|
||||
- use_example_configs Anycubic/Ai3M12864
|
||||
- build_marlin
|
||||
#
|
||||
# Delta Config (FLSUN AC because it's complex)
|
||||
#
|
||||
- use_example_configs delta/FLSUN/auto_calibrate
|
||||
- build_marlin
|
||||
#
|
||||
# Makibox Config need to check board type for Teensy++ 2.0
|
||||
#
|
||||
#- use_example_configs makibox
|
||||
#- build_marlin
|
||||
#
|
||||
# SCARA with TMC2130
|
||||
#
|
||||
- use_example_configs SCARA
|
||||
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
|
||||
- opt_set X_DRIVER_TYPE TMC2130
|
||||
- opt_set Y_DRIVER_TYPE TMC2130
|
||||
- opt_set Z_DRIVER_TYPE TMC2130
|
||||
- opt_set E0_DRIVER_TYPE TMC2130
|
||||
- opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
|
||||
- build_marlin
|
||||
#
|
||||
# TMC2208 Config
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set X_DRIVER_TYPE TMC2208
|
||||
- opt_set Y_DRIVER_TYPE TMC2208
|
||||
- opt_set Z_DRIVER_TYPE TMC2208
|
||||
- opt_set E0_DRIVER_TYPE TMC2208
|
||||
- opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
|
||||
- build_marlin
|
||||
#
|
||||
# tvrrug Config need to check board type for sanguino atmega644p
|
||||
#
|
||||
#- use_example_configs tvrrug/Round2
|
||||
#- build_marlin
|
||||
#
|
||||
#
|
||||
######## Board Types #############
|
||||
#
|
||||
# To be added in nightly test branch
|
||||
#
|
||||
|
|
|
|||
|
|
@ -11015,7 +11015,7 @@ inline void gcode_M502() {
|
|||
* Default values are used for omitted arguments.
|
||||
*/
|
||||
inline void gcode_M600() {
|
||||
|
||||
#ifdef ANYCUBIC_TFT_MODEL
|
||||
#ifdef SDSUPPORT
|
||||
if (card.sdprinting) { // are we printing from sd?
|
||||
#ifdef ANYCUBIC_TFT_DEBUG
|
||||
|
|
@ -11031,6 +11031,7 @@ inline void gcode_M502() {
|
|||
#endif
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
point_t park_point = NOZZLE_PARK_POINT;
|
||||
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -111,9 +111,12 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(ANYCUBIC_TFT_MODEL)
|
||||
#if defined(ANYCUBIC_TFT_MODEL) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
||||
#define BEEPER_PIN 31
|
||||
#define SD_DETECT_PIN 49
|
||||
#else
|
||||
#define BEEPER_PIN 31
|
||||
#define SD_DETECT_PIN -1
|
||||
#endif
|
||||
|
||||
// LCD
|
||||
|
|
@ -133,13 +136,11 @@
|
|||
#define LCD_PINS_D7 29
|
||||
|
||||
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
#define BEEPER_PIN 37
|
||||
|
||||
#define BTN_EN1 31
|
||||
#define BTN_EN2 33
|
||||
#define BTN_ENC 35
|
||||
|
||||
#define SD_DETECT_PIN 49
|
||||
#elif defined(LCD_I2C_PANELOLU2)
|
||||
#define BTN_EN1 47 //reverse if the encoder turns the wrong way.
|
||||
#define BTN_EN2 43
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
# Anycubic i3 Mega / Mega-S Marlin 1.1.9 by davidramiro
|
||||
|
||||
[](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3MFT8QMP5ZRCE&source=url) [](https://github.com/davidramiro/Marlin-AI3M/releases) [](https://github.com/davidramiro/Marlin-AI3M/issues?q=is%3Aopen+is%3Aissue) [](https://github.com/davidramiro/Marlin-AI3M/issues?q=is%3Aissue+is%3Aclosed) [](https://github.com/davidramiro/Marlin-AI3M/blob/master/LICENSE) [](https://github.com/davidramiro/Marlin-AI3M/releases/latest/) 
|
||||
[](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3MFT8QMP5ZRCE&source=url) [](https://github.com/davidramiro/Marlin-AI3M/releases) [](https://github.com/davidramiro/Marlin-AI3M/issues?q=is%3Aopen+is%3Aissue) [](https://github.com/davidramiro/Marlin-AI3M/blob/master/LICENSE) [](https://github.com/davidramiro/Marlin-AI3M/releases/latest/) [](https://github.com/davidramiro/Marlin-Ai3M/commits/) [](https://travis-ci.org/davidramiro/Marlin-Ai3M)
|
||||
|
||||
This is a custom version of the [Marlin Firmware](https://github.com/MarlinFirmware/Marlin) for the i3 Mega/Mega-S, gratefully based on [derhopp's repo](https://github.com/derhopp/Marlin-with-Anycubic-i3-Mega-TFT) with his remarkable efforts to get the Anycubic TFT screen to work with the latest versions of Marlin.
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue