Fix for Travis CI and adjust tests
This commit is contained in:
David Ramiro
309
.travis.yml
309
.travis.yml
@@ -75,315 +75,26 @@ script:
|
||||
#
|
||||
- cp Marlin/Configuration.h Marlin/Configuration.h.backup
|
||||
- cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup
|
||||
- cp Marlin/pins_RAMPS.h Marlin/pins_RAMPS.h.backup
|
||||
- cp Marlin/pins_TRIGORILLA_14.h Marlin/pins_TRIGORILLA_14.h.backup
|
||||
#
|
||||
# Build with the default configurations
|
||||
#
|
||||
- build_marlin
|
||||
#
|
||||
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
|
||||
# Test a "Fix Mounted" Probe with Safe Homing, some arc options,
|
||||
# linear bed leveling, M48, leveling debug, and firmware retraction.
|
||||
#
|
||||
- opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_set TEMP_SENSOR_0 -2
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_set POWER_SUPPLY 1
|
||||
- opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING
|
||||
- opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
|
||||
- opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
- opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE
|
||||
- opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
|
||||
- opt_set GRID_MAX_POINTS_X 16
|
||||
- opt_set_adv FANMUX0_PIN 53
|
||||
- build_marlin
|
||||
#
|
||||
# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
- opt_set EXTRUDERS 5
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_set TEMP_SENSOR_2 5
|
||||
- opt_set TEMP_SENSOR_3 20
|
||||
- opt_set TEMP_SENSOR_4 999
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION MAX7219_DEBUG
|
||||
- opt_set_adv MAX7219_ROTATE 270
|
||||
- build_marlin
|
||||
#
|
||||
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
|
||||
#
|
||||
- opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE S_CURVE_ACCELERATION
|
||||
- opt_set LCD_LANGUAGE kana_utf8
|
||||
- opt_disable SEGMENT_LEVELED_MOVES
|
||||
- opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING
|
||||
- build_marlin
|
||||
#
|
||||
# Test a Servo Probe
|
||||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
- opt_set NUM_SERVOS 1
|
||||
- opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
- opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
|
||||
- build_marlin
|
||||
#
|
||||
# Test MESH_BED_LEVELING feature, with LCD
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- build_marlin
|
||||
#
|
||||
# Test MINIRAMBO for PWM_MOTOR_CURRENT
|
||||
# PROBE_MANUALLY feature, with LCD support,
|
||||
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
|
||||
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
|
||||
# Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
|
||||
# ADVANCED_PAUSE_FEATURE, ADVANCED_PAUSE_CONTINUOUS_PURGE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU, M114_DETAIL
|
||||
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
|
||||
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_MINIRAMBO
|
||||
- opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
- opt_enable ULTIMAKERCONTROLLER SDSUPPORT
|
||||
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
|
||||
- opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
|
||||
- opt_enable_adv ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
|
||||
- opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250}
|
||||
- opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
- build_marlin
|
||||
#
|
||||
# Mixing Extruder with 5 steppers, Cyrillic
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
- opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY
|
||||
- opt_set MIXING_STEPPERS 5
|
||||
- opt_set LCD_LANGUAGE ru
|
||||
- build_marlin
|
||||
#
|
||||
# Test DUAL_X_CARRIAGE
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RUMBA
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_enable USE_XMAX_PLUG
|
||||
- opt_enable_adv DUAL_X_CARRIAGE
|
||||
- build_marlin
|
||||
#
|
||||
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
|
||||
#- opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
|
||||
#- opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
|
||||
#- opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RUMBA
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_enable NUM_SERVOS
|
||||
- opt_set NUM_SERVOS 1
|
||||
- opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
- build_marlin
|
||||
#
|
||||
# Enable COREXY
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable COREXY
|
||||
#- build_marlin
|
||||
#
|
||||
# Test many less common options
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable COREYX
|
||||
- opt_set_adv FAN_MIN_PWM 50
|
||||
- opt_set_adv FAN_KICKSTART_TIME 100
|
||||
- opt_set_adv XY_FREQUENCY_LIMIT 15
|
||||
- opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME
|
||||
- opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK
|
||||
- opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
|
||||
- opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
- opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
- opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
|
||||
- opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT
|
||||
- opt_enable USE_XMAX_PLUG
|
||||
- build_marlin
|
||||
#
|
||||
######## Other Standard LCD/Panels ##############
|
||||
#
|
||||
# ULTRA_LCD
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable ULTRA_LCD
|
||||
#- build_marlin
|
||||
#
|
||||
# DOGLCD
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable DOGLCD
|
||||
#- build_marlin
|
||||
#
|
||||
# MAKRPANEL
|
||||
# Needs to use Melzi and Sanguino hardware
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable MAKRPANEL
|
||||
#- build_marlin
|
||||
#
|
||||
# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
|
||||
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
#- build_marlin
|
||||
# #
|
||||
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable G3D_PANEL SDSUPPORT
|
||||
#- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
|
||||
#- opt_set_adv SDSORT_GCODE true
|
||||
#- opt_set_adv SDSORT_USES_RAM true
|
||||
#- opt_set_adv SDSORT_USES_STACK true
|
||||
#- opt_set_adv SDSORT_CACHE_NAMES true
|
||||
#- build_marlin
|
||||
#
|
||||
# REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with LIGHTWEIGHT_UI
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
|
||||
- opt_set_adv SDSORT_GCODE true
|
||||
- opt_set_adv SDSORT_USES_RAM true
|
||||
- opt_set_adv SDSORT_USES_STACK true
|
||||
- opt_set_adv SDSORT_CACHE_NAMES true
|
||||
- build_marlin
|
||||
#
|
||||
# REPRAPWORLD_KEYPAD
|
||||
#
|
||||
# Cant find configuration details to get it to compile
|
||||
#- restore_configs
|
||||
#- opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
|
||||
#- build_marlin
|
||||
#
|
||||
# RA_CONTROL_PANEL
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
|
||||
#- build_marlin
|
||||
#
|
||||
######## I2C LCD/PANELS ##############
|
||||
#
|
||||
# !!!ATTENTION!!!
|
||||
# Most I2C configurations are failing at the moment because they require
|
||||
# a different Liquid Crystal library "LiquidTWI2".
|
||||
#
|
||||
# LCD_SAINSMART_I2C_1602
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCD_SAINSMART_I2C_1602
|
||||
#- build_marlin
|
||||
#
|
||||
# LCD_I2C_PANELOLU2
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCD_I2C_PANELOLU2
|
||||
#- build_marlin
|
||||
#
|
||||
# LCD_I2C_VIKI
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCD_I2C_VIKI
|
||||
#- build_marlin
|
||||
#
|
||||
# LCM1602
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCM1602
|
||||
#- build_marlin
|
||||
#
|
||||
# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
|
||||
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin
|
||||
#
|
||||
#
|
||||
|
||||
######## Example Configurations ##############
|
||||
#
|
||||
# BQ Hephestos 2
|
||||
#- restore_configs
|
||||
#- use_example_configs Hephestos_2
|
||||
#- build_marlin
|
||||
# Anycubic i3 Mega with BLtouch
|
||||
#
|
||||
# Delta Config (generic) + ABL bilinear + PROBE_MANUALLY
|
||||
- use_example_configs delta/generic
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
|
||||
#- Test compatibility to https://github.com/MNieddu91/Marlin-AI3M-BLTouch
|
||||
#
|
||||
- use_example_configs Anycubic/Ai3MBLtouch
|
||||
- build_marlin
|
||||
#
|
||||
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
|
||||
# Anycubic i3 Mega with 12864 display
|
||||
#
|
||||
- use_example_configs delta/generic
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
- opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
|
||||
#- Test compatibility to RepRapDiscount FULL GRAPHIC Smart Controller
|
||||
#
|
||||
- use_example_configs Anycubic/Ai3M12864
|
||||
- build_marlin
|
||||
#
|
||||
# Delta Config (FLSUN AC because it's complex)
|
||||
#
|
||||
- use_example_configs delta/FLSUN/auto_calibrate
|
||||
- build_marlin
|
||||
#
|
||||
# Makibox Config need to check board type for Teensy++ 2.0
|
||||
#
|
||||
#- use_example_configs makibox
|
||||
#- build_marlin
|
||||
#
|
||||
# SCARA with TMC2130
|
||||
#
|
||||
- use_example_configs SCARA
|
||||
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
|
||||
- opt_set X_DRIVER_TYPE TMC2130
|
||||
- opt_set Y_DRIVER_TYPE TMC2130
|
||||
- opt_set Z_DRIVER_TYPE TMC2130
|
||||
- opt_set E0_DRIVER_TYPE TMC2130
|
||||
- opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
|
||||
- build_marlin
|
||||
#
|
||||
# TMC2208 Config
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set X_DRIVER_TYPE TMC2208
|
||||
- opt_set Y_DRIVER_TYPE TMC2208
|
||||
- opt_set Z_DRIVER_TYPE TMC2208
|
||||
- opt_set E0_DRIVER_TYPE TMC2208
|
||||
- opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
|
||||
- build_marlin
|
||||
#
|
||||
# tvrrug Config need to check board type for sanguino atmega644p
|
||||
#
|
||||
#- use_example_configs tvrrug/Round2
|
||||
#- build_marlin
|
||||
#
|
||||
#
|
||||
######## Board Types #############
|
||||
#
|
||||
# To be added in nightly test branch
|
||||
#
|
||||
|
||||
@@ -11015,21 +11015,22 @@ inline void gcode_M502() {
|
||||
* Default values are used for omitted arguments.
|
||||
*/
|
||||
inline void gcode_M600() {
|
||||
|
||||
#ifdef SDSUPPORT
|
||||
if (card.sdprinting) { // are we printing from sd?
|
||||
#ifdef ANYCUBIC_TFT_DEBUG
|
||||
SERIAL_ECHOLNPGM("DEBUG: Enter M600 TFTstate routine");
|
||||
#endif
|
||||
AnycubicTFT.TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE_REQ; // enter correct display state to show resume button
|
||||
#ifdef ANYCUBIC_TFT_DEBUG
|
||||
SERIAL_ECHOLNPGM("DEBUG: Set TFTstate to SDPAUSE_REQ");
|
||||
#endif
|
||||
AnycubicTFT.PausedByFilamentChange=true; // set flag to ensure correct resume routine gets executed
|
||||
#ifdef ANYCUBIC_TFT_DEBUG
|
||||
SERIAL_ECHOLNPGM("DEBUG: Set filament change flag");
|
||||
#endif
|
||||
}
|
||||
#ifdef ANYCUBIC_TFT_MODEL
|
||||
#ifdef SDSUPPORT
|
||||
if (card.sdprinting) { // are we printing from sd?
|
||||
#ifdef ANYCUBIC_TFT_DEBUG
|
||||
SERIAL_ECHOLNPGM("DEBUG: Enter M600 TFTstate routine");
|
||||
#endif
|
||||
AnycubicTFT.TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE_REQ; // enter correct display state to show resume button
|
||||
#ifdef ANYCUBIC_TFT_DEBUG
|
||||
SERIAL_ECHOLNPGM("DEBUG: Set TFTstate to SDPAUSE_REQ");
|
||||
#endif
|
||||
AnycubicTFT.PausedByFilamentChange=true; // set flag to ensure correct resume routine gets executed
|
||||
#ifdef ANYCUBIC_TFT_DEBUG
|
||||
SERIAL_ECHOLNPGM("DEBUG: Set filament change flag");
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
point_t park_point = NOZZLE_PARK_POINT;
|
||||
|
||||
1959
Marlin/example_configurations/Anycubic/Ai3M12864/Configuration.h
Normal file
1959
Marlin/example_configurations/Anycubic/Ai3M12864/Configuration.h
Normal file
File diff suppressed because it is too large
Load Diff
1654
Marlin/example_configurations/Anycubic/Ai3M12864/Configuration_adv.h
Normal file
1654
Marlin/example_configurations/Anycubic/Ai3M12864/Configuration_adv.h
Normal file
File diff suppressed because it is too large
Load Diff
1957
Marlin/example_configurations/Anycubic/Ai3MBLtouch/Configuration.h
Normal file
1957
Marlin/example_configurations/Anycubic/Ai3MBLtouch/Configuration.h
Normal file
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -111,9 +111,12 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(ANYCUBIC_TFT_MODEL)
|
||||
#if defined(ANYCUBIC_TFT_MODEL) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
||||
#define BEEPER_PIN 31
|
||||
#define SD_DETECT_PIN 49
|
||||
#else
|
||||
#define BEEPER_PIN 31
|
||||
#define SD_DETECT_PIN -1
|
||||
#endif
|
||||
|
||||
// LCD
|
||||
@@ -133,13 +136,11 @@
|
||||
#define LCD_PINS_D7 29
|
||||
|
||||
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
#define BEEPER_PIN 37
|
||||
|
||||
#define BTN_EN1 31
|
||||
#define BTN_EN2 33
|
||||
#define BTN_ENC 35
|
||||
|
||||
#define SD_DETECT_PIN 49
|
||||
#elif defined(LCD_I2C_PANELOLU2)
|
||||
#define BTN_EN1 47 //reverse if the encoder turns the wrong way.
|
||||
#define BTN_EN2 43
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
# Anycubic i3 Mega / Mega-S Marlin 1.1.9 by davidramiro
|
||||
|
||||
[](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3MFT8QMP5ZRCE&source=url) [](https://github.com/davidramiro/Marlin-AI3M/releases) [](https://github.com/davidramiro/Marlin-AI3M/issues?q=is%3Aopen+is%3Aissue) [](https://github.com/davidramiro/Marlin-AI3M/issues?q=is%3Aissue+is%3Aclosed) [](https://github.com/davidramiro/Marlin-AI3M/blob/master/LICENSE) [](https://github.com/davidramiro/Marlin-AI3M/releases/latest/) 
|
||||
[](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3MFT8QMP5ZRCE&source=url) [](https://github.com/davidramiro/Marlin-AI3M/releases) [](https://github.com/davidramiro/Marlin-AI3M/issues?q=is%3Aopen+is%3Aissue) [](https://github.com/davidramiro/Marlin-AI3M/blob/master/LICENSE) [](https://github.com/davidramiro/Marlin-AI3M/releases/latest/) [](https://github.com/davidramiro/Marlin-Ai3M/commits/) [](https://travis-ci.org/davidramiro/Marlin-Ai3M)
|
||||
|
||||
This is a custom version of the [Marlin Firmware](https://github.com/MarlinFirmware/Marlin) for the i3 Mega/Mega-S, gratefully based on [derhopp's repo](https://github.com/derhopp/Marlin-with-Anycubic-i3-Mega-TFT) with his remarkable efforts to get the Anycubic TFT screen to work with the latest versions of Marlin.
|
||||
|
||||
|
||||
Reference in New Issue
Block a user