wp
/
Marlin-Ai3M
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Initial Update for BLTouch 

Needed changes to run with BLTouch
This commit is contained in:
Marco Nieddu 2019-02-10 22:44:10 +01:00 committed by GitHub
parent 94c99ff406
commit 634b76b52c
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 16 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
Marlin/Configuration.h
View File

@ -540,7 +540,7 @@
#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
/** /**
* Stepper Drivers * Stepper Drivers
@ -587,7 +587,7 @@
* (This feature is not required for common micro-switches mounted on PCBs * (This feature is not required for common micro-switches mounted on PCBs
* based on the Makerbot design, since they already include the 100nF capacitor.) * based on the Makerbot design, since they already include the 100nF capacitor.)
*/ */
#define ENDSTOP_NOISE_FILTER //#define ENDSTOP_NOISE_FILTER
//============================================================================= //=============================================================================
//============================== Movement Settings ============================ //============================== Movement Settings ============================
@ -715,7 +715,7 @@
* Use G29 repeatedly, adjusting the Z height at each point with movement commands * Use G29 repeatedly, adjusting the Z height at each point with movement commands
* or (with LCD_BED_LEVELING) the LCD controller. * or (with LCD_BED_LEVELING) the LCD controller.
*/ */
#define PROBE_MANUALLY //#define PROBE_MANUALLY
//#define MANUAL_PROBE_START_Z 0.2 //#define MANUAL_PROBE_START_Z 0.2
/** /**
@ -727,8 +727,8 @@
/** /**
* Z Servo Probe, such as an endstop switch on a rotating arm. * Z Servo Probe, such as an endstop switch on a rotating arm.
*/ */
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. #define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles #define Z_SERVO_ANGLES {10,90} // Z Servo Deploy and Stow angles
/** /**
* The BLTouch probe uses a Hall effect sensor and emulates a servo. * The BLTouch probe uses a Hall effect sensor and emulates a servo.
@ -782,8 +782,8 @@
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -9 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -22 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -23 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
// Certain types of probes need to stay away from edges // Certain types of probes need to stay away from edges
@ -893,7 +893,7 @@
#define Y_MIN_POS 0 #define Y_MIN_POS 0
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS 225
#define Z_MAX_POS 205 #define Z_MAX_POS 205
/** /**
@ -981,9 +981,9 @@
*/ */
//#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR #define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL //#define AUTO_BED_LEVELING_UBL
#define MESH_BED_LEVELING //#define MESH_BED_LEVELING
/** /**
* Normally G28 leaves leveling disabled on completion. Enable * Normally G28 leaves leveling disabled on completion. Enable
@ -1026,14 +1026,14 @@
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension. // Set the number of grid points per dimension.
#define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_X 5
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
// Set the boundaries for probing (where the probe can reach). // Set the boundaries for probing (where the probe can reach).
#define LEFT_PROBE_BED_POSITION 25 #define LEFT_PROBE_BED_POSITION 10
#define RIGHT_PROBE_BED_POSITION 181 #define RIGHT_PROBE_BED_POSITION 190
#define FRONT_PROBE_BED_POSITION 25 #define FRONT_PROBE_BED_POSITION 10
#define BACK_PROBE_BED_POSITION 185 #define BACK_PROBE_BED_POSITION 202
// The Z probe minimum outer margin (to validate G29 parameters). // The Z probe minimum outer margin (to validate G29 parameters).
#define MIN_PROBE_EDGE 10 #define MIN_PROBE_EDGE 10
@ -1924,7 +1924,7 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Leave undefined or set to 0 to entirely disable the servo subsystem. * Leave undefined or set to 0 to entirely disable the servo subsystem.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command #define NUM_SERVOS 1 // Servo index starts with 0 for M280 command
// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.