From ad683fdedc2865c8d834312807ea82ae85c9d030 Mon Sep 17 00:00:00 2001 From: David Ramiro Date: Thu, 24 Jan 2019 16:45:35 +0100 Subject: [PATCH] Beautify code Fix indentation --- Marlin/AnycubicTFT.cpp | 1848 ++++++++++++++++++++-------------------- 1 file changed, 924 insertions(+), 924 deletions(-) diff --git a/Marlin/AnycubicTFT.cpp b/Marlin/AnycubicTFT.cpp index 1f60157..67efe12 100644 --- a/Marlin/AnycubicTFT.cpp +++ b/Marlin/AnycubicTFT.cpp @@ -1,21 +1,21 @@ /* - AnycubicTFT.cpp --- Support for Anycubic i3 Mega TFT - Created by Christian Hopp on 09.12.17. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ + AnycubicTFT.cpp --- Support for Anycubic i3 Mega TFT + Created by Christian Hopp on 09.12.17. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ #include @@ -42,12 +42,12 @@ char _conv[8]; char *itostr2(const uint8_t &x) { - //sprintf(conv,"%5.1f",x); - int xx=x; - _conv[0]=(xx/10)%10+'0'; - _conv[1]=(xx)%10+'0'; - _conv[2]=0; - return _conv; + //sprintf(conv,"%5.1f",x); + int xx=x; + _conv[0]=(xx/10)%10+'0'; + _conv[1]=(xx)%10+'0'; + _conv[2]=0; + return _conv; } #ifndef ULTRA_LCD @@ -58,25 +58,25 @@ char *itostr2(const uint8_t &x) char* itostr3(const int x) { - int xx = x; - _conv[4] = MINUSOR(xx, RJDIGIT(xx, 100)); - _conv[5] = RJDIGIT(xx, 10); - _conv[6] = DIGIMOD(xx, 1); - return &_conv[4]; + int xx = x; + _conv[4] = MINUSOR(xx, RJDIGIT(xx, 100)); + _conv[5] = RJDIGIT(xx, 10); + _conv[6] = DIGIMOD(xx, 1); + return &_conv[4]; } // Convert signed float to fixed-length string with 023.45 / -23.45 format char *ftostr32(const float &x) { - long xx = x * 100; - _conv[1] = MINUSOR(xx, DIGIMOD(xx, 10000)); - _conv[2] = DIGIMOD(xx, 1000); - _conv[3] = DIGIMOD(xx, 100); - _conv[4] = '.'; - _conv[5] = DIGIMOD(xx, 10); - _conv[6] = DIGIMOD(xx, 1); - return &_conv[1]; + long xx = x * 100; + _conv[1] = MINUSOR(xx, DIGIMOD(xx, 10000)); + _conv[2] = DIGIMOD(xx, 1000); + _conv[3] = DIGIMOD(xx, 100); + _conv[4] = '.'; + _conv[5] = DIGIMOD(xx, 10); + _conv[6] = DIGIMOD(xx, 1); + return &_conv[1]; } #endif @@ -85,1050 +85,1050 @@ AnycubicTFTClass::AnycubicTFTClass() { } void AnycubicTFTClass::Setup() { - AnycubicSerial.begin(115200); - //ANYCUBIC_SERIAL_START(); - ANYCUBIC_SERIAL_PROTOCOLPGM("J17"); // J17 Main board reset - ANYCUBIC_SERIAL_ENTER(); - delay(10); - ANYCUBIC_SERIAL_PROTOCOLPGM("J12"); // J12 Ready - ANYCUBIC_SERIAL_ENTER(); + AnycubicSerial.begin(115200); + //ANYCUBIC_SERIAL_START(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J17"); // J17 Main board reset + ANYCUBIC_SERIAL_ENTER(); + delay(10); + ANYCUBIC_SERIAL_PROTOCOLPGM("J12"); // J12 Ready + ANYCUBIC_SERIAL_ENTER(); #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) - pinMode(SD_DETECT_PIN, INPUT); - WRITE(SD_DETECT_PIN, HIGH); + pinMode(SD_DETECT_PIN, INPUT); + WRITE(SD_DETECT_PIN, HIGH); #endif - + #if ENABLED(ANYCUBIC_FILAMENT_RUNOUT_SENSOR) - pinMode(FIL_RUNOUT_PIN,INPUT); - WRITE(FIL_RUNOUT_PIN,HIGH); - if(READ(FIL_RUNOUT_PIN)==true) - { - ANYCUBIC_SERIAL_PROTOCOLPGM("J15"); //J15 FILAMENT LACK - ANYCUBIC_SERIAL_ENTER(); + pinMode(FIL_RUNOUT_PIN,INPUT); + WRITE(FIL_RUNOUT_PIN,HIGH); + if(READ(FIL_RUNOUT_PIN)==true) + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J15"); //J15 FILAMENT LACK + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout... J15"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout... J15"); #endif - } + } #endif - - SelectedDirectory[0]=0; - SpecialMenu=false; + + SelectedDirectory[0]=0; + SpecialMenu=false; } void AnycubicTFTClass::WriteOutageEEPromData() { - int pos=E2END-256; - + int pos=E2END-256; + } void AnycubicTFTClass::ReadOutageEEPromData() { - int pos=E2END-256; + int pos=E2END-256; } void AnycubicTFTClass::KillTFT() { - ANYCUBIC_SERIAL_PROTOCOLPGM("J11"); // J11 Kill - ANYCUBIC_SERIAL_ENTER(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J11"); // J11 Kill + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Kill command... J11"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Kill command... J11"); #endif } void AnycubicTFTClass::StartPrint(){ - if (TFTstate==ANYCUBIC_TFT_STATE_SDPAUSE) { + if (TFTstate==ANYCUBIC_TFT_STATE_SDPAUSE) { #ifndef ADVANCED_PAUSE_FEATURE - enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-10 F240\nG90")); + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-10 F240\nG90")); #endif - } - starttime=millis(); + } + starttime=millis(); #ifdef SDSUPPORT - card.startFileprint(); + card.startFileprint(); #endif - TFTstate=ANYCUBIC_TFT_STATE_SDPRINT; + TFTstate=ANYCUBIC_TFT_STATE_SDPRINT; } void AnycubicTFTClass::PausePrint(){ #ifdef SDSUPPORT - card.pauseSDPrint(); + card.pauseSDPrint(); #endif - TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE_REQ; -#ifdef ANYCUBIC_FILAMENT_RUNOUT_SENSOR - if(FilamentTestStatus) { - ANYCUBIC_SERIAL_PROTOCOLPGM("J05");// J05 pausing - ANYCUBIC_SERIAL_ENTER(); + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE_REQ; +#ifdef ANYCUBIC_FILAMENT_RUNOUT_SENSOR + if(FilamentTestStatus) { + ANYCUBIC_SERIAL_PROTOCOLPGM("J05");// J05 pausing + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: SD print paused... J05"); + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print paused... J05"); #endif - } else { - // Pause because of "out of filament" - ANYCUBIC_SERIAL_PROTOCOLPGM("J23"); //J23 FILAMENT LACK with the prompt box don't disappear - ANYCUBIC_SERIAL_ENTER(); + } else { + // Pause because of "out of filament" + ANYCUBIC_SERIAL_PROTOCOLPGM("J23"); //J23 FILAMENT LACK with the prompt box don't disappear + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout while printing... J23"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout while printing... J23"); #endif - } + } #endif } void AnycubicTFTClass::StopPrint(){ #ifdef SDSUPPORT - card.stopSDPrint(); + card.stopSDPrint(); #endif - clear_command_queue(); - quickstop_stepper(); - print_job_timer.stop(); - thermalManager.disable_all_heaters(); + clear_command_queue(); + quickstop_stepper(); + print_job_timer.stop(); + thermalManager.disable_all_heaters(); #if FAN_COUNT > 0 - for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; #endif - TFTstate=ANYCUBIC_TFT_STATE_SDSTOP_REQ; + TFTstate=ANYCUBIC_TFT_STATE_SDSTOP_REQ; } float AnycubicTFTClass::CodeValue() { - return (strtod(&TFTcmdbuffer[TFTbufindr][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindr] + 1], NULL)); + return (strtod(&TFTcmdbuffer[TFTbufindr][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindr] + 1], NULL)); } bool AnycubicTFTClass::CodeSeen(char code) { - TFTstrchr_pointer = strchr(TFTcmdbuffer[TFTbufindr], code); - return (TFTstrchr_pointer != NULL); //Return True if a character was found + TFTstrchr_pointer = strchr(TFTcmdbuffer[TFTbufindr], code); + return (TFTstrchr_pointer != NULL); //Return True if a character was found } void AnycubicTFTClass::HandleSpecialMenu() { - if(strcmp(SelectedDirectory, "")==0) { - SpecialMenu=true; - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Auto Tune Hotend PID"); - enqueue_and_echo_commands_P(PSTR("M106 S204\nM303 E0 S210 C6 U1")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Auto Tune Hotbed Pid"); - enqueue_and_echo_commands_P(PSTR("M303 E-1 S60 C6 U1")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Save EEPROM"); - enqueue_and_echo_commands_P(PSTR("M500")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Load FW Defaults"); - enqueue_and_echo_commands_P(PSTR("M502")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Preheat Bed"); - enqueue_and_echo_commands_P(PSTR("M140 S60")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Start Mesh Leveling"); - enqueue_and_echo_commands_P(PSTR("G29 S1")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Next Mesh Point"); - enqueue_and_echo_commands_P(PSTR("G29 S2")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Z Up 0.1"); - enqueue_and_echo_commands_P(PSTR("G91\nG1 Z+0.1\nG90")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Z Up 0.02"); - enqueue_and_echo_commands_P(PSTR("G91\nG1 Z+0.02\nG90")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Z Down 0.02"); - enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-0.02\nG90")); - } else if (strcmp(SelectedDirectory, "")==0) { - SERIAL_PROTOCOLLNPGM("Special Menu: Z Down 0.1"); - enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-0.1\nG90")); - } else if (strcmp(SelectedDirectory, "")==0) { - SpecialMenu=false; - } + if(strcmp(SelectedDirectory, "")==0) { + SpecialMenu=true; + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Auto Tune Hotend PID"); + enqueue_and_echo_commands_P(PSTR("M106 S204\nM303 E0 S210 C6 U1")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Auto Tune Hotbed Pid"); + enqueue_and_echo_commands_P(PSTR("M303 E-1 S60 C6 U1")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Save EEPROM"); + enqueue_and_echo_commands_P(PSTR("M500")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Load FW Defaults"); + enqueue_and_echo_commands_P(PSTR("M502")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Preheat Bed"); + enqueue_and_echo_commands_P(PSTR("M140 S60")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Start Mesh Leveling"); + enqueue_and_echo_commands_P(PSTR("G29 S1")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Next Mesh Point"); + enqueue_and_echo_commands_P(PSTR("G29 S2")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Z Up 0.1"); + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z+0.1\nG90")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Z Up 0.02"); + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z+0.02\nG90")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Z Down 0.02"); + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-0.02\nG90")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Z Down 0.1"); + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-0.1\nG90")); + } else if (strcmp(SelectedDirectory, "")==0) { + SpecialMenu=false; + } } void AnycubicTFTClass::Ls() { - if (SpecialMenu) { - switch (filenumber) { - case 0: // First Page - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - break; + if (SpecialMenu) { + switch (filenumber) { + case 0: // First Page + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + break; - case 4: // Second Page - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - break; + case 4: // Second Page + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + break; - case 8: // Third Page - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - break; - - default: - break; - } - } -#ifdef SDSUPPORT - else if(card.cardOK) - { - uint16_t cnt=filenumber; - uint16_t max_files; - uint16_t dir_files=card.getnrfilenames(); - - if((dir_files-filenumber)<4) - { - max_files=dir_files; - } else { - max_files=filenumber+3; - } - - for(cnt=filenumber; cnt<=max_files; cnt++) - { - if (cnt==0) // Special Entry - { - if(strcmp(card.getWorkDirName(), "/") == 0) { - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - SERIAL_PROTOCOL(cnt); - SERIAL_PROTOCOLLNPGM(""); - } else { - ANYCUBIC_SERIAL_PROTOCOLLNPGM("/.."); - ANYCUBIC_SERIAL_PROTOCOLLNPGM("/.."); - SERIAL_PROTOCOL(cnt); - SERIAL_PROTOCOLLNPGM("/.."); + case 8: // Third Page + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + break; + + default: + break; + } } - } else { - card.getfilename(cnt-1); +#ifdef SDSUPPORT + else if(card.cardOK) + { + uint16_t cnt=filenumber; + uint16_t max_files; + uint16_t dir_files=card.getnrfilenames(); + + if((dir_files-filenumber)<4) + { + max_files=dir_files; + } else { + max_files=filenumber+3; + } + + for(cnt=filenumber; cnt<=max_files; cnt++) + { + if (cnt==0) // Special Entry + { + if(strcmp(card.getWorkDirName(), "/") == 0) { + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + SERIAL_PROTOCOL(cnt); + SERIAL_PROTOCOLLNPGM(""); + } else { + ANYCUBIC_SERIAL_PROTOCOLLNPGM("/.."); + ANYCUBIC_SERIAL_PROTOCOLLNPGM("/.."); + SERIAL_PROTOCOL(cnt); + SERIAL_PROTOCOLLNPGM("/.."); + } + } else { + card.getfilename(cnt-1); // card.getfilename(cnt); - - if(card.filenameIsDir) { - ANYCUBIC_SERIAL_PROTOCOLPGM("/"); - ANYCUBIC_SERIAL_PROTOCOLLN(card.filename); - ANYCUBIC_SERIAL_PROTOCOLPGM("/"); - ANYCUBIC_SERIAL_PROTOCOLLN(card.longFilename); - SERIAL_PROTOCOL(cnt); - SERIAL_PROTOCOLPGM("/"); - SERIAL_PROTOCOLLN(card.longFilename); - } else { - ANYCUBIC_SERIAL_PROTOCOLLN(card.filename); - ANYCUBIC_SERIAL_PROTOCOLLN(card.longFilename); - SERIAL_PROTOCOL(cnt); - SERIAL_PROTOCOLLN(card.longFilename); + + if(card.filenameIsDir) { + ANYCUBIC_SERIAL_PROTOCOLPGM("/"); + ANYCUBIC_SERIAL_PROTOCOLLN(card.filename); + ANYCUBIC_SERIAL_PROTOCOLPGM("/"); + ANYCUBIC_SERIAL_PROTOCOLLN(card.longFilename); + SERIAL_PROTOCOL(cnt); + SERIAL_PROTOCOLPGM("/"); + SERIAL_PROTOCOLLN(card.longFilename); + } else { + ANYCUBIC_SERIAL_PROTOCOLLN(card.filename); + ANYCUBIC_SERIAL_PROTOCOLLN(card.longFilename); + SERIAL_PROTOCOL(cnt); + SERIAL_PROTOCOLLN(card.longFilename); + } + } + } + } +#endif + else { + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); } - } - } - } -#endif - else { - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); - } } void AnycubicTFTClass::CheckSDCardChange() { #ifdef SDSUPPORT - if (LastSDstatus != IS_SD_INSERTED()) - { - LastSDstatus = IS_SD_INSERTED(); - - if (LastSDstatus) - { - card.initsd(); - ANYCUBIC_SERIAL_PROTOCOLPGM("J00"); // J00 SD Card inserted - ANYCUBIC_SERIAL_ENTER(); + if (LastSDstatus != IS_SD_INSERTED()) + { + LastSDstatus = IS_SD_INSERTED(); + + if (LastSDstatus) + { + card.initsd(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J00"); // J00 SD Card inserted + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: SD card inserted... J00"); + SERIAL_ECHOLNPGM("TFT Serial Debug: SD card inserted... J00"); #endif - } - else - { - ANYCUBIC_SERIAL_PROTOCOLPGM("J01"); // J01 SD Card removed - ANYCUBIC_SERIAL_ENTER(); + } + else + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J01"); // J01 SD Card removed + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: SD card removed... J01"); + SERIAL_ECHOLNPGM("TFT Serial Debug: SD card removed... J01"); #endif - } - } -#endif + } + } +#endif } void AnycubicTFTClass::CheckHeaterError() { - if ((thermalManager.degHotend(0) < 5) || (thermalManager.degHotend(0) > 290)) - { - if (HeaterCheckCount > 60000) - { - HeaterCheckCount = 0; - ANYCUBIC_SERIAL_PROTOCOLPGM("J10"); // J10 Hotend temperature abnormal - ANYCUBIC_SERIAL_ENTER(); + if ((thermalManager.degHotend(0) < 5) || (thermalManager.degHotend(0) > 290)) + { + if (HeaterCheckCount > 60000) + { + HeaterCheckCount = 0; + ANYCUBIC_SERIAL_PROTOCOLPGM("J10"); // J10 Hotend temperature abnormal + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Hotend temperature abnormal... J20"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Hotend temperature abnormal... J20"); #endif - } - else - { - HeaterCheckCount++; - } - } - else - { - HeaterCheckCount = 0; - } + } + else + { + HeaterCheckCount++; + } + } + else + { + HeaterCheckCount = 0; + } } void AnycubicTFTClass::StateHandler() { - switch (TFTstate) { - case ANYCUBIC_TFT_STATE_IDLE: + switch (TFTstate) { + case ANYCUBIC_TFT_STATE_IDLE: #ifdef SDSUPPORT - if(card.sdprinting){ - TFTstate=ANYCUBIC_TFT_STATE_SDPRINT; - starttime=millis(); + if(card.sdprinting) { + TFTstate=ANYCUBIC_TFT_STATE_SDPRINT; + starttime=millis(); - // --> Send print info to display... most probably print started via gcode - } -#endif - break; - case ANYCUBIC_TFT_STATE_SDPRINT: -#ifdef SDSUPPORT - if(!card.sdprinting){ - // It seems that we are to printing anymore... pause or stopped? - if (card.isFileOpen()){ - // File is still open --> paused - TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; - } else { - // File is closed --> stopped - TFTstate=ANYCUBIC_TFT_STATE_IDLE; - ANYCUBIC_SERIAL_PROTOCOLPGM("J14");// J14 print done - ANYCUBIC_SERIAL_ENTER(); + // --> Send print info to display... most probably print started via gcode + } +#endif + break; + case ANYCUBIC_TFT_STATE_SDPRINT: +#ifdef SDSUPPORT + if(!card.sdprinting) { + // It seems that we are to printing anymore... pause or stopped? + if (card.isFileOpen()) { + // File is still open --> paused + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; + } else { + // File is closed --> stopped + TFTstate=ANYCUBIC_TFT_STATE_IDLE; + ANYCUBIC_SERIAL_PROTOCOLPGM("J14");// J14 print done + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: SD print done... J14"); + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print done... J14"); #endif - } - } -#endif - break; - case ANYCUBIC_TFT_STATE_SDPAUSE: - break; - case ANYCUBIC_TFT_STATE_SDPAUSE_OOF: + } + } +#endif + break; + case ANYCUBIC_TFT_STATE_SDPAUSE: + break; + case ANYCUBIC_TFT_STATE_SDPAUSE_OOF: #ifdef ANYCUBIC_FILAMENT_RUNOUT_SENSOR - if(!FilamentTestStatus) { - // We got filament again - TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; - } + if(!FilamentTestStatus) { + // We got filament again + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; + } #endif - break; - case ANYCUBIC_TFT_STATE_SDPAUSE_REQ: -#ifdef SDSUPPORT - if((!card.sdprinting) && (!planner.movesplanned())){ - // We have to wait until the sd card printing has been settled + break; + case ANYCUBIC_TFT_STATE_SDPAUSE_REQ: +#ifdef SDSUPPORT + if((!card.sdprinting) && (!planner.movesplanned())) { + // We have to wait until the sd card printing has been settled #ifndef ADVANCED_PAUSE_FEATURE - enqueue_and_echo_commands_P(PSTR("G91\nG1 Z10 F240\nG90")); + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z10 F240\nG90")); #endif #ifdef ANYCUBIC_FILAMENT_RUNOUT_SENSOR - if(FilamentTestStatus) { - TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; - } else { - // Pause because of "out of filament" - TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE_OOF; - } -#endif - ANYCUBIC_SERIAL_PROTOCOLPGM("J18");// J18 pausing print done - ANYCUBIC_SERIAL_ENTER(); -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: SD print paused done... J18"); + if(FilamentTestStatus) { + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; + } else { + // Pause because of "out of filament" + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE_OOF; + } #endif - } -#endif - break; - case ANYCUBIC_TFT_STATE_SDSTOP_REQ: -#ifdef SDSUPPORT - if((!card.sdprinting) && (!planner.movesplanned())){ - ANYCUBIC_SERIAL_PROTOCOLPGM("J16");// J16 stop print - ANYCUBIC_SERIAL_ENTER(); - TFTstate=ANYCUBIC_TFT_STATE_IDLE; + ANYCUBIC_SERIAL_PROTOCOLPGM("J18");// J18 pausing print done + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: SD print stopped... J16"); + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print paused done... J18"); #endif - if((current_position[Z_AXIS]>200)){ - enqueue_and_echo_commands_P(PSTR("G91")); - enqueue_and_echo_commands_P(PSTR("G1 Z1 F240")); - enqueue_and_echo_commands_P(PSTR("G90")); - } else if ((current_position[Z_AXIS]<190)){ - enqueue_and_echo_commands_P(PSTR("G91")); - enqueue_and_echo_commands_P(PSTR("G1 Z15 F240")); - enqueue_and_echo_commands_P(PSTR("G90")); - } else if ((current_position[Z_AXIS]<150)){ - enqueue_and_echo_commands_P(PSTR("G91")); - enqueue_and_echo_commands_P(PSTR("G1 Z50 F240")); - enqueue_and_echo_commands_P(PSTR("G90")); - } - enqueue_and_echo_commands_P(PSTR("M84")); - } -#endif - break; - default: - break; - } + } +#endif + break; + case ANYCUBIC_TFT_STATE_SDSTOP_REQ: +#ifdef SDSUPPORT + if((!card.sdprinting) && (!planner.movesplanned())) { + ANYCUBIC_SERIAL_PROTOCOLPGM("J16");// J16 stop print + ANYCUBIC_SERIAL_ENTER(); + TFTstate=ANYCUBIC_TFT_STATE_IDLE; +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print stopped... J16"); +#endif + if((current_position[Z_AXIS]>200)) { + enqueue_and_echo_commands_P(PSTR("G91")); + enqueue_and_echo_commands_P(PSTR("G1 Z1 F240")); + enqueue_and_echo_commands_P(PSTR("G90")); + } else if ((current_position[Z_AXIS]<190)) { + enqueue_and_echo_commands_P(PSTR("G91")); + enqueue_and_echo_commands_P(PSTR("G1 Z15 F240")); + enqueue_and_echo_commands_P(PSTR("G90")); + } else if ((current_position[Z_AXIS]<150)) { + enqueue_and_echo_commands_P(PSTR("G91")); + enqueue_and_echo_commands_P(PSTR("G1 Z50 F240")); + enqueue_and_echo_commands_P(PSTR("G90")); + } + enqueue_and_echo_commands_P(PSTR("M84")); + } +#endif + break; + default: + break; + } } void AnycubicTFTClass::FilamentRunout() { #if ENABLED(ANYCUBIC_FILAMENT_RUNOUT_SENSOR) - FilamentTestStatus=READ(FIL_RUNOUT_PIN)&0xff; - - if(FilamentTestStatus>FilamentTestLastStatus) - { - FilamentRunoutCounter++; - if(FilamentRunoutCounter>=15800) - { - FilamentRunoutCounter=0; -#ifdef SDSUPPORT - if((card.sdprinting==true)) - { - PausePrint(); - } - else if((card.sdprinting==false)) - { + FilamentTestStatus=READ(FIL_RUNOUT_PIN)&0xff; + + if(FilamentTestStatus>FilamentTestLastStatus) + { + FilamentRunoutCounter++; + if(FilamentRunoutCounter>=15800) + { + FilamentRunoutCounter=0; +#ifdef SDSUPPORT + if((card.sdprinting==true)) + { + PausePrint(); + } + else if((card.sdprinting==false)) + { #endif - ANYCUBIC_SERIAL_PROTOCOLPGM("J15"); //J15 FILAMENT LACK - ANYCUBIC_SERIAL_ENTER(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J15"); //J15 FILAMENT LACK + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout... J15"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout... J15"); #endif #ifdef SDSUPPORT - } -#endif - FilamentTestLastStatus=FilamentTestStatus; - } - } - else if(FilamentTestStatus!=FilamentTestLastStatus) - { - FilamentRunoutCounter=0; - FilamentTestLastStatus=FilamentTestStatus; -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout recovered"); + } #endif - } + FilamentTestLastStatus=FilamentTestStatus; + } + } + else if(FilamentTestStatus!=FilamentTestLastStatus) + { + FilamentRunoutCounter=0; + FilamentTestLastStatus=FilamentTestStatus; +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout recovered"); +#endif + } #endif } void AnycubicTFTClass::GetCommandFromTFT() { - char *starpos = NULL; - while( AnycubicSerial.available() > 0 && TFTbuflen < TFTBUFSIZE) - { - serial3_char = AnycubicSerial.read(); - if(serial3_char == '\n' || - serial3_char == '\r' || - serial3_char == ':' || - serial3_count >= (TFT_MAX_CMD_SIZE - 1) ) - { - if(!serial3_count) { //if empty line - return; - } - - TFTcmdbuffer[TFTbufindw][serial3_count] = 0; //terminate string - - if((strchr(TFTcmdbuffer[TFTbufindw], 'A') != NULL)){ - int16_t a_command; - TFTstrchr_pointer = strchr(TFTcmdbuffer[TFTbufindw], 'A'); - a_command=((int)((strtod(&TFTcmdbuffer[TFTbufindw][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindw] + 1], NULL)))); - -#ifdef ANYCUBIC_TFT_DEBUG - if ((a_command>7) && (a_command != 20)) // No debugging of status polls, please! - SERIAL_ECHOLNPAIR("TFT Serial Command: ", TFTcmdbuffer[TFTbufindw]); -#endif - - switch(a_command){ - - case 0: //A0 GET HOTEND TEMP - ANYCUBIC_SERIAL_PROTOCOLPGM("A0V "); - ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degHotend(0) + 0.5))); - ANYCUBIC_SERIAL_ENTER(); - break; - - case 1: //A1 GET HOTEND TARGET TEMP - ANYCUBIC_SERIAL_PROTOCOLPGM("A1V "); - ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degTargetHotend(0) + 0.5))); - ANYCUBIC_SERIAL_ENTER(); - break; - - case 2: //A2 GET HOTBED TEMP - ANYCUBIC_SERIAL_PROTOCOLPGM("A2V "); - ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degBed() + 0.5))); - ANYCUBIC_SERIAL_ENTER(); - break; - - case 3: //A3 GET HOTBED TARGET TEMP - ANYCUBIC_SERIAL_PROTOCOLPGM("A3V "); - ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degTargetBed() + 0.5))); - ANYCUBIC_SERIAL_ENTER(); - break; - - case 4://A4 GET FAN SPEED - { - unsigned int temp; - - temp=((fanSpeeds[0]*100)/255); - temp=constrain(temp,0,100); - - ANYCUBIC_SERIAL_PROTOCOLPGM("A4V "); - ANYCUBIC_SERIAL_PROTOCOL(temp); - ANYCUBIC_SERIAL_ENTER(); - } - break; - case 5:// A5 GET CURRENT COORDINATE - ANYCUBIC_SERIAL_PROTOCOLPGM("A5V"); - ANYCUBIC_SERIAL_SPACE(); - ANYCUBIC_SERIAL_PROTOCOLPGM("X: "); - ANYCUBIC_SERIAL_PROTOCOL(current_position[X_AXIS]); - ANYCUBIC_SERIAL_SPACE(); - ANYCUBIC_SERIAL_PROTOCOLPGM("Y: "); - ANYCUBIC_SERIAL_PROTOCOL(current_position[Y_AXIS]); - ANYCUBIC_SERIAL_SPACE(); - ANYCUBIC_SERIAL_PROTOCOLPGM("Z: "); - ANYCUBIC_SERIAL_PROTOCOL(current_position[Z_AXIS]); - ANYCUBIC_SERIAL_SPACE(); - ANYCUBIC_SERIAL_ENTER(); - break; - case 6: //A6 GET SD CARD PRINTING STATUS -#ifdef SDSUPPORT - if(card.sdprinting){ - ANYCUBIC_SERIAL_PROTOCOLPGM("A6V "); - if(card.cardOK) - { - ANYCUBIC_SERIAL_PROTOCOL(itostr3(card.percentDone())); - } - else - { - ANYCUBIC_SERIAL_PROTOCOLPGM("J02"); - } - } - else - ANYCUBIC_SERIAL_PROTOCOLPGM("A6V ---"); - ANYCUBIC_SERIAL_ENTER(); -#endif - break; - case 7://A7 GET PRINTING TIME - { - ANYCUBIC_SERIAL_PROTOCOLPGM("A7V "); - if(starttime != 0) // print time - { - uint16_t time = millis()/60000 - starttime/60000; - ANYCUBIC_SERIAL_PROTOCOL(itostr2(time/60)); - ANYCUBIC_SERIAL_SPACE(); - ANYCUBIC_SERIAL_PROTOCOLPGM("H"); - ANYCUBIC_SERIAL_SPACE(); - ANYCUBIC_SERIAL_PROTOCOL(itostr2(time%60)); - ANYCUBIC_SERIAL_SPACE(); - ANYCUBIC_SERIAL_PROTOCOLPGM("M"); - }else{ - ANYCUBIC_SERIAL_SPACE(); - ANYCUBIC_SERIAL_PROTOCOLPGM("999:999"); - } - ANYCUBIC_SERIAL_ENTER(); - - break; - } - case 8: // A8 GET SD LIST -#ifdef SDSUPPORT - SelectedDirectory[0]=0; - if(!IS_SD_INSERTED()) - { - ANYCUBIC_SERIAL_PROTOCOLPGM("J02"); - ANYCUBIC_SERIAL_ENTER(); - } - else - { - if(CodeSeen('S')) - filenumber=CodeValue(); - - ANYCUBIC_SERIAL_PROTOCOLPGM("FN "); // Filelist start - ANYCUBIC_SERIAL_ENTER(); - Ls(); - ANYCUBIC_SERIAL_PROTOCOLPGM("END"); // Filelist stop - ANYCUBIC_SERIAL_ENTER(); - } -#endif - break; - case 9: // A9 pause sd print -#ifdef SDSUPPORT - if(card.sdprinting) - { - PausePrint(); - } - else - { - StopPrint(); - } -#endif - break; - case 10: // A10 resume sd print -#ifdef SDSUPPORT - if((TFTstate==ANYCUBIC_TFT_STATE_SDPAUSE) || (TFTstate==ANYCUBIC_TFT_STATE_SDOUTAGE)) - { - StartPrint(); - ANYCUBIC_SERIAL_PROTOCOLPGM("J04");// J04 printing form sd card now - ANYCUBIC_SERIAL_ENTER(); -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: SD print started... J04"); -#endif - } -#endif - break; - case 11: // A11 STOP SD PRINT -#ifdef SDSUPPORT - if((card.sdprinting) || (TFTstate==ANYCUBIC_TFT_STATE_SDOUTAGE)) - { - StopPrint(); - } -#endif - break; - case 12: // A12 kill - kill(PSTR(MSG_KILLED)); - break; - case 13: // A13 SELECTION FILE -#ifdef SDSUPPORT - if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) - { - starpos = (strchr(TFTstrchr_pointer + 4,'*')); - if (TFTstrchr_pointer[4] == '/') { - strcpy(SelectedDirectory, TFTstrchr_pointer+5); - } else if (TFTstrchr_pointer[4] == '<') { - strcpy(SelectedDirectory, TFTstrchr_pointer+4); - } else { - SelectedDirectory[0]=0; - - if(starpos!=NULL) - *(starpos-1)='\0'; - card.openFile(TFTstrchr_pointer + 4,true); - if (card.isFileOpen()) { - ANYCUBIC_SERIAL_PROTOCOLPGM("J20"); // J20 Open successful - ANYCUBIC_SERIAL_ENTER(); -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: File open successful... J20"); -#endif - } else { - ANYCUBIC_SERIAL_PROTOCOLPGM("J21"); // J21 Open failed - ANYCUBIC_SERIAL_ENTER(); -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: File open failed... J21"); -#endif - } - } - ANYCUBIC_SERIAL_ENTER(); - } -#endif - break; - case 14: // A14 START PRINTING -#ifdef SDSUPPORT - if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE) && (card.isFileOpen())) - { - StartPrint(); - ANYCUBIC_SERIAL_PROTOCOLPGM("J04"); // J04 Starting Print - ANYCUBIC_SERIAL_ENTER(); -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Starting SD Print... J04"); -#endif - } -#endif - break; - case 15: // A15 RESUMING FROM OUTAGE - // if((!planner.movesplanned())&&(!TFTresumingflag)) - // { - // if(card.cardOK) - // FlagResumFromOutage=true; - // ResumingFlag=1; - // card.startFileprint(); - // starttime=millis(); - // ANYCUBIC_SERIAL_SUCC_START; - // } - // ANYCUBIC_SERIAL_ENTER(); - break; - case 16: // A16 set hotend temp - { - unsigned int tempvalue; - if(CodeSeen('S')) - { - tempvalue=constrain(CodeValue(),0,275); - thermalManager.setTargetHotend(tempvalue,0); - } - else if((CodeSeen('C'))&&(!planner.movesplanned())) - { - if((current_position[Z_AXIS]<10)) - enqueue_and_echo_commands_P(PSTR("G1 Z10")); //RASE Z AXIS - tempvalue=constrain(CodeValue(),0,275); - thermalManager.setTargetHotend(tempvalue,0); - } - } - // ANYCUBIC_SERIAL_ENTER(); - break; - case 17:// A17 set heated bed temp - { - unsigned int tempbed; - if(CodeSeen('S')){tempbed=constrain(CodeValue(),0,150); - thermalManager.setTargetBed(tempbed); - } - } - // ANYCUBIC_SERIAL_ENTER(); - break; - case 18:// A18 set fan speed - unsigned int temp; - if (CodeSeen('S')) - { - temp=(CodeValue()*255/100); - temp=constrain(temp,0,255); - fanSpeeds[0]=temp; - } - else fanSpeeds[0]=255; - ANYCUBIC_SERIAL_ENTER(); - break; - case 19: // A19 stop stepper drivers - if((!planner.movesplanned()) -#ifdef SDSUPPORT - &&(!card.sdprinting) -#endif - ) - { - quickstop_stepper(); - disable_X(); - disable_Y(); - disable_Z(); - disable_E0(); - } - ANYCUBIC_SERIAL_ENTER(); - break; - case 20:// A20 read printing speed - { - if(CodeSeen('S')){ - feedrate_percentage=constrain(CodeValue(),40,999);} - else{ - ANYCUBIC_SERIAL_PROTOCOLPGM("A20V "); - ANYCUBIC_SERIAL_PROTOCOL(feedrate_percentage); - ANYCUBIC_SERIAL_ENTER(); - } - } - break; - case 21: // A21 all home - if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) - { - if(CodeSeen('X')||CodeSeen('Y')||CodeSeen('Z')) - { - if(CodeSeen('X'))enqueue_and_echo_commands_P(PSTR("G28 X")); - if(CodeSeen('Y')) enqueue_and_echo_commands_P(PSTR("G28 Y")); - if(CodeSeen('Z')) enqueue_and_echo_commands_P(PSTR("G28 Z")); - } - else if(CodeSeen('C'))enqueue_and_echo_commands_P(PSTR("G28")); - } - break; - case 22: // A22 move X/Y/Z or extrude - if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) - { - float coorvalue; - unsigned int movespeed=0; - char value[30]; - if(CodeSeen('F')) // Set feedrate - movespeed = CodeValue(); - - enqueue_and_echo_commands_P(PSTR("G91")); // relative coordinates - - if(CodeSeen('X')) // Move in X direction - { - coorvalue=CodeValue(); - if((coorvalue<=0.2)&&coorvalue>0){sprintf_P(value,PSTR("G1 X0.1F%i"),movespeed);} - else if((coorvalue<=-0.1)&&coorvalue>-1){sprintf_P(value,PSTR("G1 X-0.1F%i"),movespeed);} - else {sprintf_P(value,PSTR("G1 X%iF%i"),int(coorvalue),movespeed);} - enqueue_and_echo_command(value); - } - else if(CodeSeen('Y')) // Move in Y direction - { - coorvalue=CodeValue(); - if((coorvalue<=0.2)&&coorvalue>0){sprintf_P(value,PSTR("G1 Y0.1F%i"),movespeed);} - else if((coorvalue<=-0.1)&&coorvalue>-1){sprintf_P(value,PSTR("G1 Y-0.1F%i"),movespeed);} - else {sprintf_P(value,PSTR("G1 Y%iF%i"),int(coorvalue),movespeed);} - enqueue_and_echo_command(value); - } - else if(CodeSeen('Z')) // Move in Z direction - { - coorvalue=CodeValue(); - if((coorvalue<=0.2)&&coorvalue>0){sprintf_P(value,PSTR("G1 Z0.1F%i"),movespeed);} - else if((coorvalue<=-0.1)&&coorvalue>-1){sprintf_P(value,PSTR("G1 Z-0.1F%i"),movespeed);} - else {sprintf_P(value,PSTR("G1 Z%iF%i"),int(coorvalue),movespeed);} - enqueue_and_echo_command(value); - } - else if(CodeSeen('E')) // Extrude - { - coorvalue=CodeValue(); - if((coorvalue<=0.2)&&coorvalue>0){sprintf_P(value,PSTR("G1 E0.1F%i"),movespeed);} - else if((coorvalue<=-0.1)&&coorvalue>-1){sprintf_P(value,PSTR("G1 E-0.1F%i"),movespeed);} - else {sprintf_P(value,PSTR("G1 E%iF500"),int(coorvalue)); } - enqueue_and_echo_command(value); - } - enqueue_and_echo_commands_P(PSTR("G90")); // absolute coordinates - } - ANYCUBIC_SERIAL_ENTER(); - break; - case 23: // A23 preheat pla - if((!planner.movesplanned())&& (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) - { - if((current_position[Z_AXIS]<10)) enqueue_and_echo_commands_P(PSTR("G1 Z10")); // RAISE Z AXIS - thermalManager.setTargetBed(50); - thermalManager.setTargetHotend(200, 0); - ANYCUBIC_SERIAL_SUCC_START; - ANYCUBIC_SERIAL_ENTER(); - } - break; - case 24:// A24 preheat abs - if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) - { - if((current_position[Z_AXIS]<10)) enqueue_and_echo_commands_P(PSTR("G1 Z10")); //RAISE Z AXIS - thermalManager.setTargetBed(80); - thermalManager.setTargetHotend(240, 0); - - ANYCUBIC_SERIAL_SUCC_START; - ANYCUBIC_SERIAL_ENTER(); - } - break; - case 25: // A25 cool down - if((!planner.movesplanned())&& (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) - { - thermalManager.setTargetHotend(0,0); - thermalManager.setTargetBed(0); - ANYCUBIC_SERIAL_PROTOCOLPGM("J12"); // J12 cool down - ANYCUBIC_SERIAL_ENTER(); -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Cooling down... J12"); -#endif - } - break; - case 26: // A26 refresh SD -#ifdef SDSUPPORT - if (SelectedDirectory[0]==0) { - card.initsd(); - } else { - if ((SelectedDirectory[0] == '.') && (SelectedDirectory[1] == '.')) { - card.updir(); - } else { - if (SelectedDirectory[0] == '<') { - HandleSpecialMenu(); - } else { - card.chdir(SelectedDirectory); - } - } - } + char *starpos = NULL; + while( AnycubicSerial.available() > 0 && TFTbuflen < TFTBUFSIZE) + { + serial3_char = AnycubicSerial.read(); + if(serial3_char == '\n' || + serial3_char == '\r' || + serial3_char == ':' || + serial3_count >= (TFT_MAX_CMD_SIZE - 1) ) + { + if(!serial3_count) { //if empty line + return; + } + + TFTcmdbuffer[TFTbufindw][serial3_count] = 0; //terminate string + + if((strchr(TFTcmdbuffer[TFTbufindw], 'A') != NULL)) { + int16_t a_command; + TFTstrchr_pointer = strchr(TFTcmdbuffer[TFTbufindw], 'A'); + a_command=((int)((strtod(&TFTcmdbuffer[TFTbufindw][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindw] + 1], NULL)))); - SelectedDirectory[0]=0; - - if(!IS_SD_INSERTED()) - { - ANYCUBIC_SERIAL_PROTOCOLPGM("J02"); // J02 SD Card initilized - ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: SD card initialized... J02"); + if ((a_command>7) && (a_command != 20)) // No debugging of status polls, please! + SERIAL_ECHOLNPAIR("TFT Serial Command: ", TFTcmdbuffer[TFTbufindw]); #endif - } -#endif - break; + + switch(a_command) { + + case 0: //A0 GET HOTEND TEMP + ANYCUBIC_SERIAL_PROTOCOLPGM("A0V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degHotend(0) + 0.5))); + ANYCUBIC_SERIAL_ENTER(); + break; + + case 1: //A1 GET HOTEND TARGET TEMP + ANYCUBIC_SERIAL_PROTOCOLPGM("A1V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degTargetHotend(0) + 0.5))); + ANYCUBIC_SERIAL_ENTER(); + break; + + case 2: //A2 GET HOTBED TEMP + ANYCUBIC_SERIAL_PROTOCOLPGM("A2V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degBed() + 0.5))); + ANYCUBIC_SERIAL_ENTER(); + break; + + case 3: //A3 GET HOTBED TARGET TEMP + ANYCUBIC_SERIAL_PROTOCOLPGM("A3V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degTargetBed() + 0.5))); + ANYCUBIC_SERIAL_ENTER(); + break; + + case 4://A4 GET FAN SPEED + { + unsigned int temp; + + temp=((fanSpeeds[0]*100)/255); + temp=constrain(temp,0,100); + + ANYCUBIC_SERIAL_PROTOCOLPGM("A4V "); + ANYCUBIC_SERIAL_PROTOCOL(temp); + ANYCUBIC_SERIAL_ENTER(); + } + break; + case 5:// A5 GET CURRENT COORDINATE + ANYCUBIC_SERIAL_PROTOCOLPGM("A5V"); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("X: "); + ANYCUBIC_SERIAL_PROTOCOL(current_position[X_AXIS]); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("Y: "); + ANYCUBIC_SERIAL_PROTOCOL(current_position[Y_AXIS]); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("Z: "); + ANYCUBIC_SERIAL_PROTOCOL(current_position[Z_AXIS]); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_ENTER(); + break; + case 6: //A6 GET SD CARD PRINTING STATUS +#ifdef SDSUPPORT + if(card.sdprinting) { + ANYCUBIC_SERIAL_PROTOCOLPGM("A6V "); + if(card.cardOK) + { + ANYCUBIC_SERIAL_PROTOCOL(itostr3(card.percentDone())); + } + else + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J02"); + } + } + else + ANYCUBIC_SERIAL_PROTOCOLPGM("A6V ---"); + ANYCUBIC_SERIAL_ENTER(); +#endif + break; + case 7://A7 GET PRINTING TIME + { + ANYCUBIC_SERIAL_PROTOCOLPGM("A7V "); + if(starttime != 0) // print time + { + uint16_t time = millis()/60000 - starttime/60000; + ANYCUBIC_SERIAL_PROTOCOL(itostr2(time/60)); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("H"); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOL(itostr2(time%60)); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("M"); + }else{ + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("999:999"); + } + ANYCUBIC_SERIAL_ENTER(); + + break; + } + case 8: // A8 GET SD LIST +#ifdef SDSUPPORT + SelectedDirectory[0]=0; + if(!IS_SD_INSERTED()) + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J02"); + ANYCUBIC_SERIAL_ENTER(); + } + else + { + if(CodeSeen('S')) + filenumber=CodeValue(); + + ANYCUBIC_SERIAL_PROTOCOLPGM("FN "); // Filelist start + ANYCUBIC_SERIAL_ENTER(); + Ls(); + ANYCUBIC_SERIAL_PROTOCOLPGM("END"); // Filelist stop + ANYCUBIC_SERIAL_ENTER(); + } +#endif + break; + case 9: // A9 pause sd print +#ifdef SDSUPPORT + if(card.sdprinting) + { + PausePrint(); + } + else + { + StopPrint(); + } +#endif + break; + case 10: // A10 resume sd print +#ifdef SDSUPPORT + if((TFTstate==ANYCUBIC_TFT_STATE_SDPAUSE) || (TFTstate==ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + StartPrint(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J04");// J04 printing form sd card now + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print started... J04"); +#endif + } +#endif + break; + case 11: // A11 STOP SD PRINT +#ifdef SDSUPPORT + if((card.sdprinting) || (TFTstate==ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + StopPrint(); + } +#endif + break; + case 12: // A12 kill + kill(PSTR(MSG_KILLED)); + break; + case 13: // A13 SELECTION FILE +#ifdef SDSUPPORT + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + starpos = (strchr(TFTstrchr_pointer + 4,'*')); + if (TFTstrchr_pointer[4] == '/') { + strcpy(SelectedDirectory, TFTstrchr_pointer+5); + } else if (TFTstrchr_pointer[4] == '<') { + strcpy(SelectedDirectory, TFTstrchr_pointer+4); + } else { + SelectedDirectory[0]=0; + + if(starpos!=NULL) + *(starpos-1)='\0'; + card.openFile(TFTstrchr_pointer + 4,true); + if (card.isFileOpen()) { + ANYCUBIC_SERIAL_PROTOCOLPGM("J20"); // J20 Open successful + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: File open successful... J20"); +#endif + } else { + ANYCUBIC_SERIAL_PROTOCOLPGM("J21"); // J21 Open failed + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: File open failed... J21"); +#endif + } + } + ANYCUBIC_SERIAL_ENTER(); + } +#endif + break; + case 14: // A14 START PRINTING +#ifdef SDSUPPORT + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE) && (card.isFileOpen())) + { + StartPrint(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J04"); // J04 Starting Print + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Starting SD Print... J04"); +#endif + } +#endif + break; + case 15: // A15 RESUMING FROM OUTAGE + // if((!planner.movesplanned())&&(!TFTresumingflag)) + // { + // if(card.cardOK) + // FlagResumFromOutage=true; + // ResumingFlag=1; + // card.startFileprint(); + // starttime=millis(); + // ANYCUBIC_SERIAL_SUCC_START; + // } + // ANYCUBIC_SERIAL_ENTER(); + break; + case 16: // A16 set hotend temp + { + unsigned int tempvalue; + if(CodeSeen('S')) + { + tempvalue=constrain(CodeValue(),0,275); + thermalManager.setTargetHotend(tempvalue,0); + } + else if((CodeSeen('C'))&&(!planner.movesplanned())) + { + if((current_position[Z_AXIS]<10)) + enqueue_and_echo_commands_P(PSTR("G1 Z10")); //RASE Z AXIS + tempvalue=constrain(CodeValue(),0,275); + thermalManager.setTargetHotend(tempvalue,0); + } + } + // ANYCUBIC_SERIAL_ENTER(); + break; + case 17:// A17 set heated bed temp + { + unsigned int tempbed; + if(CodeSeen('S')) {tempbed=constrain(CodeValue(),0,150); + thermalManager.setTargetBed(tempbed);} + } + // ANYCUBIC_SERIAL_ENTER(); + break; + case 18:// A18 set fan speed + unsigned int temp; + if (CodeSeen('S')) + { + temp=(CodeValue()*255/100); + temp=constrain(temp,0,255); + fanSpeeds[0]=temp; + } + else fanSpeeds[0]=255; + ANYCUBIC_SERIAL_ENTER(); + break; + case 19: // A19 stop stepper drivers + if((!planner.movesplanned()) +#ifdef SDSUPPORT + &&(!card.sdprinting) +#endif + ) + { + quickstop_stepper(); + disable_X(); + disable_Y(); + disable_Z(); + disable_E0(); + } + ANYCUBIC_SERIAL_ENTER(); + break; + case 20:// A20 read printing speed + { + if(CodeSeen('S')) { + feedrate_percentage=constrain(CodeValue(),40,999); + } + else{ + ANYCUBIC_SERIAL_PROTOCOLPGM("A20V "); + ANYCUBIC_SERIAL_PROTOCOL(feedrate_percentage); + ANYCUBIC_SERIAL_ENTER(); + } + } + break; + case 21: // A21 all home + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + if(CodeSeen('X')||CodeSeen('Y')||CodeSeen('Z')) + { + if(CodeSeen('X')) enqueue_and_echo_commands_P(PSTR("G28 X")); + if(CodeSeen('Y')) enqueue_and_echo_commands_P(PSTR("G28 Y")); + if(CodeSeen('Z')) enqueue_and_echo_commands_P(PSTR("G28 Z")); + } + else if(CodeSeen('C')) enqueue_and_echo_commands_P(PSTR("G28")); + } + break; + case 22: // A22 move X/Y/Z or extrude + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + float coorvalue; + unsigned int movespeed=0; + char value[30]; + if(CodeSeen('F')) // Set feedrate + movespeed = CodeValue(); + + enqueue_and_echo_commands_P(PSTR("G91")); // relative coordinates + + if(CodeSeen('X')) // Move in X direction + { + coorvalue=CodeValue(); + if((coorvalue<=0.2)&&coorvalue>0) {sprintf_P(value,PSTR("G1 X0.1F%i"),movespeed);} + else if((coorvalue<=-0.1)&&coorvalue>-1) {sprintf_P(value,PSTR("G1 X-0.1F%i"),movespeed);} + else {sprintf_P(value,PSTR("G1 X%iF%i"),int(coorvalue),movespeed);} + enqueue_and_echo_command(value); + } + else if(CodeSeen('Y')) // Move in Y direction + { + coorvalue=CodeValue(); + if((coorvalue<=0.2)&&coorvalue>0) {sprintf_P(value,PSTR("G1 Y0.1F%i"),movespeed);} + else if((coorvalue<=-0.1)&&coorvalue>-1) {sprintf_P(value,PSTR("G1 Y-0.1F%i"),movespeed);} + else {sprintf_P(value,PSTR("G1 Y%iF%i"),int(coorvalue),movespeed);} + enqueue_and_echo_command(value); + } + else if(CodeSeen('Z')) // Move in Z direction + { + coorvalue=CodeValue(); + if((coorvalue<=0.2)&&coorvalue>0) {sprintf_P(value,PSTR("G1 Z0.1F%i"),movespeed);} + else if((coorvalue<=-0.1)&&coorvalue>-1) {sprintf_P(value,PSTR("G1 Z-0.1F%i"),movespeed);} + else {sprintf_P(value,PSTR("G1 Z%iF%i"),int(coorvalue),movespeed);} + enqueue_and_echo_command(value); + } + else if(CodeSeen('E')) // Extrude + { + coorvalue=CodeValue(); + if((coorvalue<=0.2)&&coorvalue>0) {sprintf_P(value,PSTR("G1 E0.1F%i"),movespeed);} + else if((coorvalue<=-0.1)&&coorvalue>-1) {sprintf_P(value,PSTR("G1 E-0.1F%i"),movespeed);} + else {sprintf_P(value,PSTR("G1 E%iF500"),int(coorvalue)); } + enqueue_and_echo_command(value); + } + enqueue_and_echo_commands_P(PSTR("G90")); // absolute coordinates + } + ANYCUBIC_SERIAL_ENTER(); + break; + case 23: // A23 preheat pla + if((!planner.movesplanned())&& (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + if((current_position[Z_AXIS]<10)) enqueue_and_echo_commands_P(PSTR("G1 Z10")); // RAISE Z AXIS + thermalManager.setTargetBed(50); + thermalManager.setTargetHotend(200, 0); + ANYCUBIC_SERIAL_SUCC_START; + ANYCUBIC_SERIAL_ENTER(); + } + break; + case 24:// A24 preheat abs + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + if((current_position[Z_AXIS]<10)) enqueue_and_echo_commands_P(PSTR("G1 Z10")); //RAISE Z AXIS + thermalManager.setTargetBed(80); + thermalManager.setTargetHotend(240, 0); + + ANYCUBIC_SERIAL_SUCC_START; + ANYCUBIC_SERIAL_ENTER(); + } + break; + case 25: // A25 cool down + if((!planner.movesplanned())&& (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + thermalManager.setTargetHotend(0,0); + thermalManager.setTargetBed(0); + ANYCUBIC_SERIAL_PROTOCOLPGM("J12"); // J12 cool down + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Cooling down... J12"); +#endif + } + break; + case 26: // A26 refresh SD +#ifdef SDSUPPORT + if (SelectedDirectory[0]==0) { + card.initsd(); + } else { + if ((SelectedDirectory[0] == '.') && (SelectedDirectory[1] == '.')) { + card.updir(); + } else { + if (SelectedDirectory[0] == '<') { + HandleSpecialMenu(); + } else { + card.chdir(SelectedDirectory); + } + } + } + + SelectedDirectory[0]=0; + + if(!IS_SD_INSERTED()) + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J02"); // J02 SD Card initilized + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD card initialized... J02"); +#endif + } +#endif + break; #ifdef SERVO_ENDSTOPS - case 27: // A27 servos angles adjust - break; + case 27: // A27 servos angles adjust + break; #endif - case 28: // A28 filament test - { - if(CodeSeen('O')); - else if(CodeSeen('C')); - } - ANYCUBIC_SERIAL_ENTER(); - break; - case 29: // A29 Z PROBE OFFESET SET - break; - - case 30: // A30 assist leveling, the original function was canceled - if(CodeSeen('S')) { -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Entering level menue..."); -#endif - } else if(CodeSeen('O')) { -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Leveling started and movint to front left..."); -#endif - enqueue_and_echo_commands_P(PSTR("G91\nG1 Z10 F240\nG90\nG28\nG29\nG1 X20 Y20 F6000\nG1 Z0 F240")); - } else if(CodeSeen('T')) { -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Level checkpoint front right..."); -#endif - enqueue_and_echo_commands_P(PSTR("G1 Z5 F240\nG1 X190 Y20 F6000\nG1 Z0 F240")); - } else if(CodeSeen('C')) { -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Level checkpoint back right..."); -#endif - enqueue_and_echo_commands_P(PSTR("G1 Z5 F240\nG1 X190 Y190 F6000\nG1 Z0 F240")); - } else if(CodeSeen('Q')) { -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Level checkpoint back right..."); -#endif - enqueue_and_echo_commands_P(PSTR("G1 Z5 F240\nG1 X190 Y20 F6000\nG1 Z0 F240")); - } else if(CodeSeen('H')) { -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Level check no heating..."); -#endif - // enqueue_and_echo_commands_P(PSTR("... TBD ...")); - ANYCUBIC_SERIAL_PROTOCOLPGM("J22"); // J22 Test print done - ANYCUBIC_SERIAL_ENTER(); -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Leveling print test done... J22"); -#endif - } else if(CodeSeen('L')) { -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Level check heating..."); -#endif - // enqueue_and_echo_commands_P(PSTR("... TBD ...")); - ANYCUBIC_SERIAL_PROTOCOLPGM("J22"); // J22 Test print done - ANYCUBIC_SERIAL_ENTER(); -#ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Leveling print test with heating done... J22"); -#endif - } - ANYCUBIC_SERIAL_SUCC_START; - ANYCUBIC_SERIAL_ENTER(); - - break; - case 31: // A31 zoffset - if((!planner.movesplanned())&&(TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) - { -#if HAS_BED_PROBE - char value[30]; - char *s_zoffset; - //if((current_position[Z_AXIS]<10)) - // z_offset_auto_test(); + case 28: // A28 filament test + { + if(CodeSeen('O')); + else if(CodeSeen('C')); + } + ANYCUBIC_SERIAL_ENTER(); + break; + case 29: // A29 Z PROBE OFFESET SET + break; - if(CodeSeen('S')){ - ANYCUBIC_SERIAL_PROTOCOLPGM("A9V "); - ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(zprobe_zoffset*100.00 + 0.5))); - ANYCUBIC_SERIAL_ENTER(); + case 30: // A30 assist leveling, the original function was canceled + if(CodeSeen('S')) { #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOPGM("TFT sending current z-probe offset data... <"); - SERIAL_ECHOPGM("A9V "); - SERIAL_ECHO(itostr3(int(zprobe_zoffset*100.00 + 0.5))); - SERIAL_ECHOLNPGM(">"); + SERIAL_ECHOLNPGM("TFT Entering level menue..."); #endif - } - if(CodeSeen('D')) - { - s_zoffset=ftostr32(float(CodeValue())/100.0); - sprintf_P(value,PSTR("M851 Z")); - strcat(value,s_zoffset); - enqueue_and_echo_command(value); // Apply Z-Probe offset - enqueue_and_echo_commands_P(PSTR("M500")); // Save to EEPROM - } -#endif - } - ANYCUBIC_SERIAL_ENTER(); - break; - case 32: // A32 clean leveling beep flag - if(CodeSeen('S')) { + } else if(CodeSeen('O')) { #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Level saving data..."); + SERIAL_ECHOLNPGM("TFT Leveling started and movint to front left..."); #endif - enqueue_and_echo_commands_P(PSTR("M500\nM420 S1\nG1 Z10 F240\nG1 X0 Y0 F6000")); - ANYCUBIC_SERIAL_SUCC_START; - ANYCUBIC_SERIAL_ENTER(); - } - break; - case 33: // A33 get version info - { - ANYCUBIC_SERIAL_PROTOCOLPGM("J33 "); - ANYCUBIC_SERIAL_PROTOCOLPGM(MSG_MY_VERSION); - ANYCUBIC_SERIAL_ENTER(); - } - break; - default: break; + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z10 F240\nG90\nG28\nG29\nG1 X20 Y20 F6000\nG1 Z0 F240")); + } else if(CodeSeen('T')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level checkpoint front right..."); +#endif + enqueue_and_echo_commands_P(PSTR("G1 Z5 F240\nG1 X190 Y20 F6000\nG1 Z0 F240")); + } else if(CodeSeen('C')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level checkpoint back right..."); +#endif + enqueue_and_echo_commands_P(PSTR("G1 Z5 F240\nG1 X190 Y190 F6000\nG1 Z0 F240")); + } else if(CodeSeen('Q')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level checkpoint back right..."); +#endif + enqueue_and_echo_commands_P(PSTR("G1 Z5 F240\nG1 X190 Y20 F6000\nG1 Z0 F240")); + } else if(CodeSeen('H')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level check no heating..."); +#endif + // enqueue_and_echo_commands_P(PSTR("... TBD ...")); + ANYCUBIC_SERIAL_PROTOCOLPGM("J22"); // J22 Test print done + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Leveling print test done... J22"); +#endif + } else if(CodeSeen('L')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level check heating..."); +#endif + // enqueue_and_echo_commands_P(PSTR("... TBD ...")); + ANYCUBIC_SERIAL_PROTOCOLPGM("J22"); // J22 Test print done + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Leveling print test with heating done... J22"); +#endif + } + ANYCUBIC_SERIAL_SUCC_START; + ANYCUBIC_SERIAL_ENTER(); + + break; + case 31: // A31 zoffset + if((!planner.movesplanned())&&(TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { +#if HAS_BED_PROBE + char value[30]; + char *s_zoffset; + //if((current_position[Z_AXIS]<10)) + // z_offset_auto_test(); + + if(CodeSeen('S')) { + ANYCUBIC_SERIAL_PROTOCOLPGM("A9V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(zprobe_zoffset*100.00 + 0.5))); + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOPGM("TFT sending current z-probe offset data... <"); + SERIAL_ECHOPGM("A9V "); + SERIAL_ECHO(itostr3(int(zprobe_zoffset*100.00 + 0.5))); + SERIAL_ECHOLNPGM(">"); +#endif + } + if(CodeSeen('D')) + { + s_zoffset=ftostr32(float(CodeValue())/100.0); + sprintf_P(value,PSTR("M851 Z")); + strcat(value,s_zoffset); + enqueue_and_echo_command(value); // Apply Z-Probe offset + enqueue_and_echo_commands_P(PSTR("M500")); // Save to EEPROM + } +#endif + } + ANYCUBIC_SERIAL_ENTER(); + break; + case 32: // A32 clean leveling beep flag + if(CodeSeen('S')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level saving data..."); +#endif + enqueue_and_echo_commands_P(PSTR("M500\nM420 S1\nG1 Z10 F240\nG1 X0 Y0 F6000")); + ANYCUBIC_SERIAL_SUCC_START; + ANYCUBIC_SERIAL_ENTER(); + } + break; + case 33: // A33 get version info + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J33 "); + ANYCUBIC_SERIAL_PROTOCOLPGM(MSG_MY_VERSION); + ANYCUBIC_SERIAL_ENTER(); + } + break; + default: break; + } + } + TFTbufindw = (TFTbufindw + 1)%TFTBUFSIZE; + TFTbuflen += 1; + serial3_count = 0; //clear buffer + } + else + { + TFTcmdbuffer[TFTbufindw][serial3_count++] = serial3_char; + } } - } - TFTbufindw = (TFTbufindw + 1)%TFTBUFSIZE; - TFTbuflen += 1; - serial3_count = 0; //clear buffer - } - else - { - TFTcmdbuffer[TFTbufindw][serial3_count++] = serial3_char; - } - } } void AnycubicTFTClass::CommandScan() { - CheckHeaterError(); - CheckSDCardChange(); - StateHandler(); - - if(TFTbuflen<(TFTBUFSIZE-1)) - GetCommandFromTFT(); - if(TFTbuflen) - { - TFTbuflen = (TFTbuflen-1); - TFTbufindr = (TFTbufindr + 1)%TFTBUFSIZE; - } + CheckHeaterError(); + CheckSDCardChange(); + StateHandler(); + + if(TFTbuflen<(TFTBUFSIZE-1)) + GetCommandFromTFT(); + if(TFTbuflen) + { + TFTbuflen = (TFTbuflen-1); + TFTbufindr = (TFTbufindr + 1)%TFTBUFSIZE; + } } void AnycubicTFTClass::HeatingStart() { - ANYCUBIC_SERIAL_PROTOCOLPGM("J06"); // J07 hotend heating start - ANYCUBIC_SERIAL_ENTER(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J06"); // J07 hotend heating start + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Nozzle is heating... J06"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Nozzle is heating... J06"); #endif } void AnycubicTFTClass::HeatingDone() { - ANYCUBIC_SERIAL_PROTOCOLPGM("J07"); // J07 hotend heating done - ANYCUBIC_SERIAL_ENTER(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J07"); // J07 hotend heating done + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Nozzle heating is done... J07"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Nozzle heating is done... J07"); #endif - if(TFTstate==ANYCUBIC_TFT_STATE_SDPRINT) - { - ANYCUBIC_SERIAL_PROTOCOLPGM("J04"); // J04 printing from sd card - ANYCUBIC_SERIAL_ENTER(); + if(TFTstate==ANYCUBIC_TFT_STATE_SDPRINT) + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J04"); // J04 printing from sd card + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Continuing SD print after heating... J04"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Continuing SD print after heating... J04"); #endif - } + } } void AnycubicTFTClass::BedHeatingStart() { - ANYCUBIC_SERIAL_PROTOCOLPGM("J08"); // J08 hotbed heating start - ANYCUBIC_SERIAL_ENTER(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J08"); // J08 hotbed heating start + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Bed is heating... J08"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Bed is heating... J08"); #endif } void AnycubicTFTClass::BedHeatingDone() { - ANYCUBIC_SERIAL_PROTOCOLPGM("J09"); // J09 hotbed heating done - ANYCUBIC_SERIAL_ENTER(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J09"); // J09 hotbed heating done + ANYCUBIC_SERIAL_ENTER(); #ifdef ANYCUBIC_TFT_DEBUG - SERIAL_ECHOLNPGM("TFT Serial Debug: Bed heating is done... J09"); + SERIAL_ECHOLNPGM("TFT Serial Debug: Bed heating is done... J09"); #endif }