From e4fd34a0cd2f78f56289f67ce87ee85c9cf1b7ca Mon Sep 17 00:00:00 2001
From: Marco Nieddu <MNieddu91@users.noreply.github.com>
Date: Mon, 11 Feb 2019 09:02:50 +0100
Subject: [PATCH] Update SpecialMenue to ABL

---
 Marlin/AnycubicTFT.cpp | 71 +++++++++++++-----------------------------
 1 file changed, 22 insertions(+), 49 deletions(-)

diff --git a/Marlin/AnycubicTFT.cpp b/Marlin/AnycubicTFT.cpp
index 74ffa60..8f50987 100644
--- a/Marlin/AnycubicTFT.cpp
+++ b/Marlin/AnycubicTFT.cpp
@@ -216,24 +216,9 @@ void AnycubicTFTClass::HandleSpecialMenu()
         } else if (strcmp(SelectedDirectory, "<preheat bed>")==0) {
                 SERIAL_PROTOCOLLNPGM("Special Menu: Preheat Bed");
                 enqueue_and_echo_commands_P(PSTR("M140 S60"));
-        } else if (strcmp(SelectedDirectory, "<start mesh leveling>")==0) {
-                SERIAL_PROTOCOLLNPGM("Special Menu: Start Mesh Leveling");
-                enqueue_and_echo_commands_P(PSTR("G29 S1"));
-        } else if (strcmp(SelectedDirectory, "<next mesh point>")==0) {
-                SERIAL_PROTOCOLLNPGM("Special Menu: Next Mesh Point");
-                enqueue_and_echo_commands_P(PSTR("G29 S2"));
-        } else if (strcmp(SelectedDirectory, "<z up 0.1>")==0) {
-                SERIAL_PROTOCOLLNPGM("Special Menu: Z Up 0.1");
-                enqueue_and_echo_commands_P(PSTR("G91\nG1 Z+0.1\nG90"));
-        } else if (strcmp(SelectedDirectory, "<z up 0.02>")==0) {
-                SERIAL_PROTOCOLLNPGM("Special Menu: Z Up 0.02");
-                enqueue_and_echo_commands_P(PSTR("G91\nG1 Z+0.02\nG90"));
-        } else if (strcmp(SelectedDirectory, "<z down 0.02>")==0) {
-                SERIAL_PROTOCOLLNPGM("Special Menu: Z Down 0.02");
-                enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-0.02\nG90"));
-        } else if (strcmp(SelectedDirectory, "<z down 0.1>")==0) {
-                SERIAL_PROTOCOLLNPGM("Special Menu: Z Down 0.1");
-                enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-0.1\nG90"));
+        } else if (strcmp(SelectedDirectory, "<auto bed leveling>")==0) {
+                SERIAL_PROTOCOLLNPGM("Special Menu: Auto Bed Leveling");
+                enqueue_and_echo_commands_P(PSTR("G28\nG29"));
         } else if (strcmp(SelectedDirectory, "<m600 pause>")==0) {
                 SERIAL_PROTOCOLLNPGM("Special Menu: M600 Pause");
                 enqueue_and_echo_commands_P(PSTR("M600"));
@@ -249,42 +234,30 @@ void AnycubicTFTClass::Ls()
 {
         if (SpecialMenu) {
                 switch (filenumber) {
+
                 case 0: // First Page
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Z Up 0.1>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Z Up 0.1>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Z Up 0.02>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Z Up 0.02>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Z Down 0.02>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Z Down 0.02>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Z Down 0.1>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Z Down 0.1>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Preheat bed>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Preheat bed>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Start Auto Bed Leveling>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Start Auto Bed Leveling>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Save EEPROM>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Save EEPROM>");
+						ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Exit>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Exit>");
                         break;
 
                 case 4: // Second Page
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Preheat bed>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Preheat bed>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Start Mesh Leveling>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Start Mesh Leveling>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Next Mesh Point>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Next Mesh Point>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Save EEPROM>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Save EEPROM>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Auto Tune Hotend PID>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Auto Tune Hotend PID>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Auto Tune Hotbed PID>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Auto Tune Hotbed PID>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Load FW Defaults>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Load FW Defaults>");
+						ANYCUBIC_SERIAL_PROTOCOLLNPGM("<M600 Pause>");
+                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<M600 Pause>");
                         break;
 
                 case 8: // Third Page
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Exit>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Exit>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Auto Tune Hotend PID>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Auto Tune Hotend PID>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Auto Tune Hotbed PID>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Auto Tune Hotbed PID>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Load FW Defaults>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<Load FW Defaults>");
-                        break;
-
-                case 12: // Fourth Page
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<M600 Pause>");
-                        ANYCUBIC_SERIAL_PROTOCOLLNPGM("<M600 Pause>");
                         ANYCUBIC_SERIAL_PROTOCOLLNPGM("<M108 Resume>");
                         ANYCUBIC_SERIAL_PROTOCOLLNPGM("<M108 Resume>");
                         break;
@@ -905,8 +878,8 @@ void AnycubicTFTClass::GetCommandFromTFT()
                                         if((!planner.movesplanned())&& (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE))
                                         {
                                                 if((current_position[Z_AXIS]<10)) enqueue_and_echo_commands_P(PSTR("G1 Z10")); // RAISE Z AXIS
-                                                thermalManager.setTargetBed(50);
-                                                thermalManager.setTargetHotend(200, 0);
+                                                thermalManager.setTargetBed(55);
+                                                thermalManager.setTargetHotend(195, 0);
                                                 ANYCUBIC_SERIAL_SUCC_START;
                                                 ANYCUBIC_SERIAL_ENTER();
                                         }