Commit Graph

32 Commits

Author SHA1 Message Date
Sam Hardeman b1aa1a5fb9 Allow repeated command entries when in "Special Menu" by not clearing "SelectedDirectory". 2020-10-22 18:03:26 +09:00
David Ramiro 425e10c29a
Fix stuttering issues on detailed models
- Optimize TFT code for state handling (pause, runout, ...)
- Remove multiple state booleans in favour of a single integer
- Remove obsolete filament runout code
- Increase jerk/accel
- Decrease TX buffer size
- Revert minimum segment time to factory default
2019-04-03 15:48:11 +02:00
David Ramiro 1bd23dfbd8
Tweak PID autotune
- Add beep on autotune completion
- Raise cycle count on hotend PID tune via TFT from 6 to 15
2019-03-31 18:36:25 +02:00
David Ramiro bf8b6729b2
Add optional startup chime
Enable STARTUP_CHIME in Configuration.h to play a short chime on Trigorilla startup/serial connection, disabled by default
2019-03-24 16:57:31 +01:00
David Ramiro c1c2743452
Rework pause, filament runout & abort
- Park head with retract on pause and abort
- Use native functions instead of Gcode
- Loud beeps to alert user on runout
- Fix potential looping issues by using flags
- Fix "Stop failed" message on some occasions
2019-03-12 16:23:29 +01:00
David Ramiro ee6094f39d
Cleanup
Improving and adding some comments to the code, updating a few details on the readme
2019-03-10 22:40:35 +01:00
David Ramiro 1a5804f260
Implement nozzle reheating on timeout via display
- Raise nozzle timeout to 10 minutes
- Use continue button as reheat trigger
- Manage nozzle_timed_out variable via display
- Add PausedByNozzleTimeout flag to enter correct routine on display
- Bump version to 1.4.3
2019-03-08 16:30:56 +01:00
David Ramiro cea54723e7
Use realtime on filament sensor
Instead of incrementing a variable on every iteration on the filament sensor trigger loop, we now use a real time macro that ensure better repeatability and is easier to customize.
2019-03-08 16:05:54 +01:00
David Ramiro 90e27ff21b
Fix indentation
Improve readability and fix #ifdef and #endif indentations
2019-03-08 01:25:21 +01:00
David Ramiro 85c32a2bb6
Fix Z movement on abort
- Referencing #29
- Adding audio feedback to special menu M500 and M502
2019-03-06 22:59:46 +01:00
David Ramiro 2c53c33d52
Tweak M600 display resume
- Add startFileprint(); call to M108 display routine to fix progress and ensure "printing done" gets shown
- Add SD printing check in marlin_main.cpp M600 routine to skip TFTstate if not necessary (e.g. USB printing)
- Move routine to the top again to ensure immediate execution
2019-02-24 15:48:03 +01:00
David Ramiro 30bbf59cb0
Increase filament rounout trigger delay
In some cases, the filament runout was triggered erratically, we are now waiting for the trigger to last a few moments until we start the routine.
2019-02-22 22:26:58 +01:00
David Ramiro 2bd6f2f23a
Pause & runout code cleanup
Final changes to pause & filament runout overhaul before release:
- Use booleans instead of chars for cleaner code
- Raised retraction amount
2019-02-18 18:05:37 +01:00
David Ramiro 5fbc1b6035
Tweak pause & filament runout
- Check for PausedByFilamentChange flag on pause and resume
- Move stop movements from StateHandler() to StopPrint()
- Retract 1mm on pause (2mm on runout) without feed on resume, preventing ooze
- Fix special menu margin on some buttons
2019-02-16 18:41:22 +01:00
David Ramiro 76b873baee
Add M600 and M108 routines to display code 2019-02-15 22:58:42 +01:00
David Ramiro 1fe1842a75
Rework filament runout, pause and stop
Editing display pausing/stopping and using nozzle parking for filament runout
2019-02-15 20:26:54 +01:00
David Ramiro 01e152b456
Bugfix
- Buffer flush added to the the end of M190 loop
- Inverted position polling when canceling print via display
2019-02-06 12:32:58 +01:00
David Ramiro 5f7a252267
Enable filament change feature
Adding support for headless M600/M108 filament change

Addressing #15
2019-02-05 15:24:00 +01:00
David Ramiro b3af9708e9
Tweak print cancelling behaviour
Fix movement on certain positions of the Z axis
2019-01-24 16:50:34 +01:00
David Ramiro ad683fdedc
Beautify code
Fix indentation
2019-01-24 16:45:35 +01:00
David Ramiro 4dd8c5df0d
Enhance print cancelling behaviour 2019-01-10 12:52:12 +01:00
David Ramiro 7c05040274
Move up nozzle after aborting
Raise Z for up to 5 cm (depending on current height) after aborting a print via display.

Referencing issue #9.
2019-01-07 14:07:20 +01:00
David Ramiro f877f1201f
Fix home issue
Possible fix for #7 and #8
2019-01-02 18:30:50 +01:00
David Ramiro fd3be9aca4
Fix special menu bug
Fixed typo on the Z movement and edited M502 menu text
2018-12-25 15:00:44 +01:00
David Ramiro c5ae6e872f
Adjust PID tune timeouts and thermal watchdog
- Updated readme
- Adjusted WATCH_TEMP_PERIOD to be more tolerant
- Raised PID tuning timeout
- Adjusted default PID tuning commands
- Changed hex file naming
2018-12-24 14:26:06 +01:00
David Ramiro 5e9dfe5038
Tweak PID & G26
Thanks to some great feedback from @RolandRosenfeld I did some small tweaks:

- Adjusted auto PID tune parameters
- Replaced manufacturer PID values
- Minor changes to the readme
- Raised retraction on G26 Mesh Test
- Merged latest bugfix from derhopp
- Added latest hex files

Co-Authored-By: Roland Rosenfeld <roland@spinnaker.de>
2018-12-17 20:16:57 +01:00
David Ramiro b76f3358a5
Enabling fan on auto PID tune
Since a custom fan duct caused the heat block on my printer to cool down enough to have a negative impact on PETG printing, I adjusted the auto PID tune aswell as the default PID values.

Also adding a precompiled hex file of all the previous changes.
2018-11-24 03:44:53 +01:00
David Ramiro 0fb578c915
Add precise Z axis movement
To help with manual mesh bed leveling, I added four Z-axis controls to the special menu.
2018-11-19 16:43:06 +01:00
David Ramiro dde0d239d3
Further tweak PID 2018-11-18 00:40:10 +01:00
David Ramiro 35de65ee1d
Fix mesh leveling menu
Fixed a typo that caused mesh leveling not to start
2018-11-17 22:56:38 +01:00
David Ramiro 5432154bf7
Update special menu
• Added auto PID tune of heatbed to the special TFT menu
•Enabled automatic saving on both PID tune commands
• Added preheating and mesh leveling commands to the special TFT menu
• Mentioned changes in readme
2018-11-17 22:02:55 +01:00
David Ramiro 6957194af3
Initial commit
Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 10:32:01 +01:00