/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * Korean * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ #ifndef LANGUAGE_KO_KR_H #define LANGUAGE_KO_KR_H #define DISPLAY_CHARSET_ISO10646_KO_KR #define WELCOME_MSG MACHINE_NAME " \xdd\xaf" //"준비" ("Ready.") #define MSG_SD_INSERTED "\xeb\x97 \xb0\xce" // "카드 삽입" ("Card inserted") #define MSG_SD_REMOVED "\xeb\x97 \xd9\x86" // "카드 제거" ("Card removed") #define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters #define MSG_MAIN "\xa5\xcc" // "메인" ("Main") #define MSG_AUTOSTART "\xcf\x95 \xba\xd0" // "자동 시작" ("Autostart") #define MSG_DISABLE_STEPPERS "\xa8\xec \xd8\xe0" // "모터 정지" ("Disable steppers") #define MSG_DEBUG_MENU "Debug Menu" // ("Debug Menu") #define MSG_PROGRESS_BAR_TEST "Progress Bar Test" // ("Progress Bar Test") #define MSG_AUTO_HOME "\xf5\xc8\x9f" // "홈으로" ("Auto home") #define MSG_AUTO_HOME_X "X \xf5\xc8\x9f" // "X 홈으로" ("Home X") #define MSG_AUTO_HOME_Y "Y \xf5\xc8\x9f" // "Y 홈으로" ("Home Y") #define MSG_AUTO_HOME_Z "Z \xf5\xc8\x9f" // "Z 홈으로" ("Home Z") #define MSG_TMC_Z_CALIBRATION "Z \xac\xd8" // "Z 보정" ("Calibrate Z") #define MSG_LEVEL_BED_HOMING "XYZ \xf5\xc8\x9f" // "XYZ 홈으로" ("Homing XYZ") #define MSG_LEVEL_BED_WAITING "\xba\xd0\xf4\x9d\xa7 \x90\xa1\xb4\xc4" // "시작하려면 누르세요" ("Click to Begin") #define MSG_LEVEL_BED_NEXT_POINT "\x91\xc9 \xf1\xcc\xed" // "다음 포인트" ("Next Point") #define MSG_LEVEL_BED_DONE "\x9c\xab\xa4 \xc3\xa0" // "레벨링 완료" ("Leveling Done!") #define MSG_SET_HOME_OFFSETS "\xf5 \xc1\xf2\xb6 \xb3\xd8" // "홈 오프셋 설정" ("Set home offsets") #define MSG_HOME_OFFSETS_APPLIED "\xc1\xf2\xb6 \xd4\xc5 \xc3\xa0" // "오프셋 적용 완료" ("Offsets applied") #define MSG_SET_ORIGIN "\xe3\x8d \xb3\xd8" // "초기 설정" ("Set origin") #define MSG_PREHEAT_1 "PLA \xc0\xbf" // "PLA 예열" ("Preheat PLA") #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " #define MSG_PREHEAT_1_ALL "PLA \xd5\xe2 \xc0\xbf " // "PLA 전체 예열" (" All") #define MSG_PREHEAT_1_BEDONLY "PLA \xaa\x97 \xc0\xbf " // "PLA 베드 예열" (" Bed") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " \xb3\xd8" //"PLA 예열 설정" (" Setting") #define MSG_PREHEAT_2 "ABS \xc0\xbf" //"ABS 예열" Preheat ABS #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " #define MSG_PREHEAT_2_ALL "ABS \xd5\xe2 \xc0\xbf " // "ABS 전체 예열" (" All") #define MSG_PREHEAT_2_BEDONLY "ABS \xaa\x97 \xc0\xbf " // "ABS 베드 예열" (" Bed") #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " \xb3\xd8" //"ABS 예열 설정" (" Setting") #define MSG_COOLDOWN "\x8e\x83" // "냉각" ("Cooldown") #define MSG_SWITCH_PS_ON "\xb9\xc7\xe9 \xd5\xc6 on" // "스위치 전원 on" ("Switch power on") #define MSG_SWITCH_PS_OFF "\xb9\xc7\xe9 \xd5\xc6 off" // "스위치 전원 off" ("Switch power off") #define MSG_EXTRUDE "\xbc\xe6" // "압출" ("Extrude") #define MSG_RETRACT "\xa2\xed\x9a\xed" // "리트랙트" ("Retract") #define MSG_MOVE_AXIS "\xe5 \xcb\x95" // "축 이동" ("Move axis") #define MSG_BED_LEVELING "\xaa\x97 \x9c\xab\xa4" // "베드 레벨링" ("Bed Leveling") #define MSG_LEVEL_BED "\xaa\x97 \x9c\xab\xa4 \xc3\xa0" // "베드 레벨링 완료" ("Level bed") #define MSG_MOVING "\xcb\x95 \xde" // "이동 중" ("Moving...") #define MSG_FREE_XY "Free XY" // ("Free XY") #define MSG_MOVE_X "X\xe5 \xcb\x95" // "X축 이동" ("Move X") #define MSG_MOVE_Y "Y\xe5 \xcb\x95" // "Y축 이동" ("Move Y") #define MSG_MOVE_Z "Z\xe5 \xcb\x95" // "Z축 이동" ("Move Z") #define MSG_MOVE_E "\xbc\xe6" // "압출" ("Extrude") #define MSG_MOVE_01MM "0.1mm \xcb\x95" // "0.1mm 이동" ("Move 0.1mm") #define MSG_MOVE_1MM " 1mm \xcb\x95" // " 1mm 이동" ("Move 1mm") #define MSG_MOVE_10MM " 10mm \xcb\x95" // " 10mm 이동" ("Move 10mm") #define MSG_SPEED "\xb8\x93" // "속도" ("Speed") #define MSG_BED_Z "Z \xaa\x97" // "Z 베드" ("Bed Z") #define MSG_NOZZLE "\x8f\xdf" // "노즐" ("Nozzle") #define MSG_BED "\xaa\x97" // "베드" ("Bed") #define MSG_FAN_SPEED "\xf0 \xb8\x93" // "팬 속도" ("Fan speed") #define MSG_FLOW "\xbc\xe6\x9b" // "압출량" ("Flow") #define MSG_CONTROL "\xb3\xd8" // "설정"("Control") #define MSG_MIN LCD_STR_THERMOMETER " \xe4\xb7" // " 최소" (" Min") #define MSG_MAX LCD_STR_THERMOMETER " \xe4\x92" // " 최대" (" Max") #define MSG_FACTOR LCD_STR_THERMOMETER " Fact" // (" Fact") #define MSG_AUTOTEMP "\xcf\x95 \xc2\x93 \xb3\xd8" // "자동 온도 설정" ("Autotemp") #define MSG_ON "\xc2 " // "온 " intentional space to shift wide symbol to the left #define MSG_OFF "\xc1\xf2 " // "오프 " intentional space to shift wide symbol to the left #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_SELECT "Select" #define MSG_JERK "Jerk" #if LCD_WIDTH >= 20 #define MSG_ACC "\x82\xb8\x93 mm/s2" // "가속도 mm/s2" ("Accel") #if IS_KINEMATIC #define MSG_VA_JERK "Va-jerk" // "Va-jerk" ("Va-jerk") #define MSG_VB_JERK "Vb-jerk" // "Vb-jerk" ("Vb-jerk") #define MSG_VC_JERK "Vc-jerk" // "Vc-jerk" ("Vc-jerk") #else #define MSG_VA_JERK "Vx-jerk mm/s" // "Vx-jerk mm/s" ("Vx-jerk") #define MSG_VB_JERK "Vy-jerk mm/s" // "Vy-jerk mm/s" ("Vy-jerk") #define MSG_VC_JERK "Vz-jerk mm/s" // "Vz-jerk mm/s" ("Vz-jerk") #endif #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #else #define MSG_ACC "\x82\xb8" // "가속" ("Accel") #if IS_KINEMATIC #define MSG_VA_JERK "Va-jerk" // "Va-jerk" ("Va-jerk") #define MSG_VB_JERK "Vb-jerk" // "Vb-jerk" ("Vb-jerk") #define MSG_VC_JERK "Vc-jerk" // "Vc-jerk" ("Vc-jerk") #else #define MSG_VA_JERK "Vx-jerk" // "Vx-jerk" ("Vx-jerk") #define MSG_VB_JERK "Vy-jerk" // "Vy-jerk" ("Vy-jerk") #define MSG_VC_JERK "Vz-jerk" // "Vz-jerk" ("Vz-jerk") #endif #define MSG_VE_JERK "Ve-jerk" // "Ve-jerk" ("Ve-jerk") #define MSG_VMAX "Vmax " #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #endif #define MSG_A_RETRACT "A-retract" #define MSG_A_TRAVEL "A-travel" #if LCD_WIDTH >= 20 #define MSG_STEPS_PER_MM "Steps/mm" #if IS_KINEMATIC #define MSG_ASTEPS "Asteps/mm" #define MSG_BSTEPS "Bsteps/mm" #define MSG_CSTEPS "Csteps/mm" #else #define MSG_ASTEPS "Xsteps/mm" #define MSG_BSTEPS "Ysteps/mm" #define MSG_CSTEPS "Zsteps/mm" #endif #define MSG_ESTEPS "Esteps/mm" #define MSG_E1STEPS "E1steps/mm" #define MSG_E2STEPS "E2steps/mm" #define MSG_E3STEPS "E3steps/mm" #define MSG_E4STEPS "E4steps/mm" #define MSG_E5STEPS "E5steps/mm" #else #define MSG_STEPS_PER_MM "Steps" #if IS_KINEMATIC #define MSG_ASTEPS "Asteps" #define MSG_BSTEPS "Bsteps" #define MSG_CSTEPS "Csteps" #else #define MSG_ASTEPS "Xsteps" #define MSG_BSTEPS "Ysteps" #define MSG_CSTEPS "Zsteps" #endif #define MSG_ESTEPS "Esteps" #define MSG_E1STEPS "E1steps" #define MSG_E2STEPS "E2steps" #define MSG_E3STEPS "E3steps" #define MSG_E4STEPS "E4steps" #define MSG_E5STEPS "E5steps" #endif #define MSG_TEMPERATURE "\xc2\x93" // "온도" ("Temperature") #define MSG_MOTION "\x95\xd0" // "동작" ("Motion") #define MSG_FILAMENT "\xf3\x99\xa6\xed" // "필라멘트" ("Filament") #define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "\xf3\x99\xa6\xed Dia." //"필라멘트 Dia" ("Fil. Dia.") #define MSG_CONTRAST "LCD contrast" // ("LCD contrast") #define MSG_STORE_EEPROM "\xb3\xd8 \xd3\xd1" // "설정 저장" ("Store memory") #define MSG_LOAD_EEPROM "\xb3\xd8 \x9f\x97" // "설정 로드" ("Load memory") #define MSG_RESTORE_FAILSAFE "\xb3\xd8 \x96\x94\xa2\x8d" // "설정 되돌리기" ("Restore failsafe") #define MSG_REFRESH "\xb1\x9f \x88\xea" // "새로 고침" ("Refresh") #define MSG_WATCH "\xa5\xcc" // "메인" ("Info screen") #define MSG_PREPARE "\xdd\xaf" // "준비" ("Prepare") #define MSG_TUNE "Tune" // ("Tune") #define MSG_PAUSE_PRINT "\xe6\x9e \xcd\xba\xd8\xe0" // "출력 일시정지" ("Pause print") #define MSG_RESUME_PRINT "\xe6\x9e \xd2\x85" // "출력 재개" ("Resume print") #define MSG_STOP_PRINT "\xe6\x9e \xd8\xe0" // "출력 정지" ("Stop print") #define MSG_CARD_MENU "SD \xeb\x97 \xe6\x9e" // "SD 카드 출력" ("Print from SD") #define MSG_NO_CARD "SD \xeb\x97 \xbe\xc9" // "SD 카드 없음" ("No SD card") #define MSG_DWELL "\xd6\xd5" // "절전" ("Sleep...") #define MSG_USERWAIT "\x92\x8d \xde" // "대기 중" ("Wait for user...") #define MSG_PRINT_ABORTED "\xe6\x9e \xe8\xb7" // "출력 취소" ("Print aborted") #define MSG_NO_MOVE "No move" // ("No move.") #define MSG_KILLED "\x84\xd9 \xdb\xa0" // "강제 종료" ("KILLED. ") #define MSG_STOPPED "\xd8\xe0" // "정지" ("STOPPED. ") #define MSG_CONTROL_RETRACT "Retract mm" // ("Retract mm") #define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm" // ("Swap Re.mm") #define MSG_CONTROL_RETRACTF "Retract V" // ("Retract V") #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" // ("Hop mm") #define MSG_CONTROL_RETRACT_RECOVER "UnRet mm" // ("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet mm" // ("S UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" // ("UnRet V") #define MSG_AUTORETRACT "AutoRetr." // ("AutoRetr.") #define MSG_FILAMENTCHANGE "\xf3\x99\xa6\xed \x8b\xe2" // "필라멘트 교체" ("Change filament") #define MSG_INIT_SDCARD "SD \xeb\x97 \xe3\x8d\xf6" // "SD 카드 초기화" ("Init. SD card") #define MSG_CNG_SDCARD "SD \xeb\x97 \x8b\xe2" // "SD 카드 교체" ("Change SD card") #define MSG_ZPROBE_OUT "Z probe out. bed" // ("Z probe out. bed") #define MSG_BLTOUCH_SELFTEST "BLTouch \xcf\x82 \xd7\x87" // "BLTouch 자가 점검" ("BLTouch Self-Test") #define MSG_BLTOUCH_RESET "BLTouch \xa2\xb6" // "BLTouch 리셋" ("Reset BLTouch") #define MSG_HOME "\xf5\xc8\x9f" // "홈으로" ("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST "\xe1\xc9\xc8\x9f" // "처음으로" ("first") #define MSG_ZPROBE_ZOFFSET "Z \xc1\xf2\xb6" // "Z 오프셋" ("Z Offset") #define MSG_BABYSTEP_X "Babystep X" // "Babystep X" ("Babystep X") #define MSG_BABYSTEP_Y "Babystep Y" // "Babystep Y" ("Babystep Y") #define MSG_BABYSTEP_Z "Babystep Z" // "Babystep Z" ("Babystep Z") #define MSG_ENDSTOP_ABORT "Endstop \xe8\xb7" // "Endstop 취소" ("Endstop abort") #define MSG_HEATING_FAILED_LCD "\x82\xbf \xbb\xef" // "가열 실패" ("Heating failed") #define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP" // ("Err: REDUNDANT TEMP") #define MSG_THERMAL_RUNAWAY "ERR: \xc2\x93\xb5\xb2" // "ERR: 온도센서" ("THERMAL RUNAWAY") #define MSG_ERR_MAXTEMP "ERR: \xc2\x93 \xe4\x92" // "ERR: 온도 최대" ("Err: MAXTEMP") #define MSG_ERR_MINTEMP "ERR: \xc2\x93 \xe4\xb7" // "ERR: 온도 최저" ("Err: MINTEMP") #if LCD_WIDTH >= 20 #define MSG_ERR_MAXTEMP_BED "ERR: \xaa\x97 \xc2\x93 \xe4\x92" // "ERR: 베드 온도 최대" ("Err: MAXTEMP BED") #define MSG_ERR_MINTEMP_BED "ERR: \xaa\x97 \xc2\x93 \xe4\xb7" // "ERR: 베드 온도 최소" ("Err: MINTEMP BED") #else #define MSG_ERR_MAXTEMP_BED "ERR: \xaa\x97 \xc2\x93 \xe4\x92" // "ERR: 베드 온도 최대" ("Err: MAXTEMP BED") #define MSG_ERR_MINTEMP_BED "ERR: \xaa\x97 \xc2\x93 \xe4\xb7" // "ERR: 베드 온도 최소" ("Err: MINTEMP BED") #endif #define MSG_ERR_Z_HOMING MSG_HOME " " MSG_X MSG_Y " " MSG_FIRST // "ｻｷﾆ XY ｦﾌｯｷｻｾﾃｸﾀﾞｻｲ" or "ｻｷﾆ XY ｦﾌｯｷｻｾﾖ" ("G28 Z Forbidden") #define MSG_HALTED "\xf2\xa3\xec \xd8\xe0" // "프린터 위험" ("PRINTER HALTED") #define MSG_PLEASE_RESET "\xa2\xb6" // "리셋" ("Please reset") #define MSG_SHORT_DAY "d" // One character only #define MSG_SHORT_HOUR "h" // One character only #define MSG_SHORT_MINUTE "m" // One character only #define MSG_HEATING "\x82\xbf \xde..." // "가열 중..." ("Heating...") #define MSG_BED_HEATING "\xaa\x97 \x82\xbf \xde..." // "베드 가열 중..." ("Bed Heating...") #define MSG_DELTA_CALIBRATE "Delta \xac\xd8" // "Delta 보정" ("Delta Calibration") #define MSG_DELTA_CALIBRATE_X "X \xac\xd8" // "X 보정" ("Calibrate X") #define MSG_DELTA_CALIBRATE_Y "Y \xac\xd8" // "Y 보정" ("Calibrate Y") #define MSG_DELTA_CALIBRATE_Z "Z \xac\xd8" // "Z 보정" ("Calibrate Z") #define MSG_DELTA_CALIBRATE_CENTER "Center \xac\xd8" // "Center 보정" ("Calibrate Center") #define MSG_INFO_MENU "\xf2\xa3\xec \xd8\xac" // "프린터 정보" ("About Printer") #define MSG_INFO_PRINTER_MENU "\xf2\xa3\xec \xd8\xac" // "프린터 정보" ("Printer Info") #define MSG_INFO_STATS_MENU "\xf2\xa3\xec \x90\xd4" // "프린터 누적" ("Printer Stats") #define MSG_INFO_BOARD_MENU "\xac\x97 \xd8\xac" // "보드 정보" ("Board Info") #define MSG_INFO_THERMISTOR_MENU "\xc2\x93\xb5\xb2" // "서미스터" ("Thermistors") #define MSG_INFO_EXTRUDERS "\xbc\xe6\x8d" // "압출기" ("Extruders") #define MSG_INFO_BAUDRATE "Baud" // "Baud" ("Baud") #define MSG_INFO_PROTOCOL "Protocol" // ("Protocol") #define MSG_CASE_LIGHT "Case light" // ("Case light") #define MSG_INFO_PRINT_COUNT "Print Count" // ("Print Count") #define MSG_INFO_COMPLETED_PRINTS "\xc3\xa0" // "완료" ("Completed") #define MSG_INFO_PRINT_TIME "Total print time" // ("Total print time") #define MSG_INFO_PRINT_LONGEST "Longest job time" // ("Longest job time") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_FILAMENT "Extruded total" // ("Extruded total") #else #define MSG_INFO_PRINT_FILAMENT "Extruded" // ("Extruded") #endif #define MSG_INFO_MIN_TEMP "\xe4\xd3 \xc2\x93" // "최저 온도" ("Min Temp") #define MSG_INFO_MAX_TEMP "\xe4\x88 \xc2\x93" // "최고 온도" ("Max Temp") #if LCD_WIDTH >= 20 #define MSG_INFO_PSU "\xd5\xc6 \x89\x8c" // "전원 공급" ("Power Supply") #else #define MSG_INFO_PSU "\xd5\xc6 \x89\x8c" // "전원 공급" ("Power Supply") #endif #define MSG_DRIVE_STRENGTH "Drive Strength" // ("Drive Strength") #define MSG_DAC_PERCENT "Driver %" // ("Driver %") #define MSG_DAC_EEPROM_WRITE MSG_STORE_EEPROM // "ﾒﾓﾘﾍｶｸﾉｳ" ("DAC EEPROM Write") #define MSG_FILAMENT_CHANGE_OPTION_RESUME "\xe6\x9e \xcb\xbd\xf4\x86" // "출력 이어하기" ("Resume print") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 "\xba\xd0 \x92\x8d \xde" // "시작 대기 중" ("Wait for start") #define MSG_FILAMENT_CHANGE_INIT_2 "\xf3\x99\xa6\xed\xca" // "필라멘트의" ("of the filament") #define MSG_FILAMENT_CHANGE_UNLOAD_1 "\x92\x8d \xde" // "대기 중" ("Wait for") #define MSG_FILAMENT_CHANGE_UNLOAD_2 "\xf3\x99\xa6\xed \xad\xda" // "필라멘트 부족" ("filament unload") #define MSG_FILAMENT_CHANGE_INSERT_1 "\xf3\x99\xa6\xed \xb0\xce," // "필라멘트 삽입," ("Insert filament") #define MSG_FILAMENT_CHANGE_INSERT_2 "\xa9\xee \x90\xa1\x86" // "버튼 누르기" ("and press button") #define MSG_FILAMENT_CHANGE_LOAD_1 "\x92\x8d \xde" // "대기 중" ("Wait for") #define MSG_FILAMENT_CHANGE_LOAD_2 "\xf3\x99\xa6\xed \xe7\xae" // "필라멘트 충분" ("filament load") #define MSG_FILAMENT_CHANGE_RESUME_1 "\xe6\x9e \x92\x8d \xde" // "출력 대기 중" ("Wait for print") #define MSG_FILAMENT_CHANGE_RESUME_2 "\xcb\xbd\xf4\x86" // "이어하기" ("to resume") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 "\x92\x8d" // "대기" ("Please wait...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..." // ("Ejecting...") #define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click" // ("Insert and Click") #define MSG_FILAMENT_CHANGE_LOAD_1 "\x9f\x98 \xde..." // "로딩 중..." ("Loading...") #define MSG_FILAMENT_CHANGE_RESUME_1 "\xd2\x85 \xde..." // "재개 중..." ("Resuming...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_KO_KR_H