Marlin-Ai3M/Marlin/thermistortable_6.h

64 lines
1.8 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// R25 = 100 kOhm, beta25 = 4092 K, 8.2 kOhm pull-up, 100k Epcos (?) thermistor
const short temptable_6[][2] PROGMEM = {
{ OV( 1), 350 },
{ OV( 28), 250 }, // top rating 250C
{ OV( 31), 245 },
{ OV( 35), 240 },
{ OV( 39), 235 },
{ OV( 42), 230 },
{ OV( 44), 225 },
{ OV( 49), 220 },
{ OV( 53), 215 },
{ OV( 62), 210 },
{ OV( 71), 205 }, // fitted graphically
{ OV( 78), 200 }, // fitted graphically
{ OV( 94), 190 },
{ OV( 102), 185 },
{ OV( 116), 170 },
{ OV( 143), 160 },
{ OV( 183), 150 },
{ OV( 223), 140 },
{ OV( 270), 130 },
{ OV( 318), 120 },
{ OV( 383), 110 },
{ OV( 413), 105 },
{ OV( 439), 100 },
{ OV( 484), 95 },
{ OV( 513), 90 },
{ OV( 607), 80 },
{ OV( 664), 70 },
{ OV( 781), 60 },
{ OV( 810), 55 },
{ OV( 849), 50 },
{ OV( 914), 45 },
{ OV( 914), 40 },
{ OV( 935), 35 },
{ OV( 954), 30 },
{ OV( 970), 25 },
{ OV( 978), 22 },
{ OV(1008), 3 },
{ OV(1023), 0 } // to allow internal 0 degrees C
};