Marlin-Ai3M/Marlin/thermistortable_7.h

84 lines
2.2 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAG-J01
const short temptable_7[][2] PROGMEM = {
{ OV( 1), 941 },
{ OV( 19), 362 },
{ OV( 37), 299 }, // top rating 300C
{ OV( 55), 266 },
{ OV( 73), 245 },
{ OV( 91), 229 },
{ OV( 109), 216 },
{ OV( 127), 206 },
{ OV( 145), 197 },
{ OV( 163), 190 },
{ OV( 181), 183 },
{ OV( 199), 177 },
{ OV( 217), 171 },
{ OV( 235), 166 },
{ OV( 253), 162 },
{ OV( 271), 157 },
{ OV( 289), 153 },
{ OV( 307), 149 },
{ OV( 325), 146 },
{ OV( 343), 142 },
{ OV( 361), 139 },
{ OV( 379), 135 },
{ OV( 397), 132 },
{ OV( 415), 129 },
{ OV( 433), 126 },
{ OV( 451), 123 },
{ OV( 469), 121 },
{ OV( 487), 118 },
{ OV( 505), 115 },
{ OV( 523), 112 },
{ OV( 541), 110 },
{ OV( 559), 107 },
{ OV( 577), 105 },
{ OV( 595), 102 },
{ OV( 613), 99 },
{ OV( 631), 97 },
{ OV( 649), 94 },
{ OV( 667), 92 },
{ OV( 685), 89 },
{ OV( 703), 86 },
{ OV( 721), 84 },
{ OV( 739), 81 },
{ OV( 757), 78 },
{ OV( 775), 75 },
{ OV( 793), 72 },
{ OV( 811), 69 },
{ OV( 829), 66 },
{ OV( 847), 62 },
{ OV( 865), 59 },
{ OV( 883), 55 },
{ OV( 901), 51 },
{ OV( 919), 46 },
{ OV( 937), 41 },
{ OV( 955), 35 },
{ OV( 973), 27 },
{ OV( 991), 17 },
{ OV(1009), 1 },
{ OV(1023), 0 } // to allow internal 0 degrees C
};