Marlin-Ai3M/Marlin/pins_TRIGORILLA_14.h

233 lines
5.6 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Mega with RAMPS v1.4 for Anycubic
*/
#ifndef BOARD_NAME
#define BOARD_NAME "Anycubic RAMPS 1.4"
#endif
#define LARGE_FLASH true
// Misc PINs
#define BUZZER 31
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define Z_MIN_PROBE_PIN 2
#define FIL_RUNOUT_PIN 19
#ifdef OutageTest
#define OUTAGETEST_PIN 79
#define OUTAGECON_PIN 58
#endif
// Steppers
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
// EndStops
#define X_MIN_PIN 3
#define Y_MIN_PIN 42
#define Z_MIN_PIN 18
#define X_MAX_PIN 43
#define Y_MAX_PIN -1
#define Z_MAX_PIN -1
// Fans
#define FAN_PIN 9
#define FAN2_PIN 44
#define ORIG_E0_AUTO_FAN_PIN 44
#define CONTROLLER_FAN_PIN 7
// Heaters
#define HEATER_0_PIN 10
#define HEATER_1_PIN 45
#define HEATER_BED_PIN 8
// Temperatursensoren
#define TEMP_0_PIN 13
#define TEMP_1_PIN 15
#define TEMP_2_PIN 12
#define TEMP_BED_PIN 14
// Servos
#ifdef NUM_SERVOS
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#endif
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#endif
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#if defined(ANYCUBIC_TFT_MODEL)
#define BEEPER_PIN 31
#define SD_DETECT_PIN 49
#endif
// LCD
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) || defined(ANYCUBIC_TFT_MODEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#ifdef ULTRA_LCD
#ifdef NEWPANEL
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
#define BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#elif defined(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 //reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif defined(LCD_I2C_VIKI)
#define BTN_EN1 22 //reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define SDSS 53
#define SD_DETECT_PIN 49
#elif defined(FULL_GRAPHIC_SMALL_PANEL)
#define BEEPER_PIN 37
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 23
#define DOGLCD_CS 27
#define LCD_PIN_BL 25 // backlight LED on PA3
#define KILL_PIN 41
// GLCD features
//#define LCD_CONTRAST 190
// Uncomment screen orientation
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
//The encoder and click button
#define BTN_EN1 33
#define BTN_EN2 -1
#define BTN_ENC 35 //the click switch
//not connected to a pin
#define SD_DETECT_PIN 49
#elif defined(MULTIPANEL)
// #define BEEPER_PIN 37
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 17
#define DOGLCD_CS 16
#define LCD_PIN_BL 23 // backlight LED on A11/D65
#define SDSS 53
#define KILL_PIN 64
// GLCD features
//#define LCD_CONTRAST 190
// Uncomment screen orientation
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
//The encoder and click button
#define BTN_EN1 -1
#define BTN_EN2 33
#define BTN_ENC 35 //the click switch
//not connected to a pin
#define SD_DETECT_PIN 49
#else
//arduino pin which triggers an piezzo beeper
#define BEEPER_PIN 31 // Beeper on AUX-4
//buttons are directly attached using AUX-2
#ifdef REPRAPWORLD_KEYPAD
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC -1 //the click
#endif
#ifdef G3D_PANEL
#define SD_DETECT_PIN 49
#else
#define SD_DETECT_PIN -1 // Ramps does not use this port
#endif
#endif
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif
#endif