History

David Ramiro 6957194af3 Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.		2018-11-16 10:32:01 +01:00
..
Configuration.h	Initial commit	2018-11-16 10:32:01 +01:00
Configuration_adv.h	Initial commit	2018-11-16 10:32:01 +01:00
README.md	Initial commit	2018-11-16 10:32:01 +01:00
_Bootscreen.h	Initial commit	2018-11-16 10:32:01 +01:00
_Statusscreen.h	Initial commit	2018-11-16 10:32:01 +01:00

README.md

Creality Ender Support

This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is not the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because

1.0.0 had very different serial output in setup() and overall code structure.
1.0.2 changed the VERSION_STRING to include a leading space, and lcd_init uses SET_INPUT instead of pinMode.

Configurations were found by seeing what code was compiled into the firmware, and constants used there.

For U8Glib, at least version 1.14 and at most 1.17 is used, because

1.12 didn't have the extra speed argument to u8g_InitCom.
1.13 didn't have the soft reset instruction for UC1701 initialization.
1.18 has a new directory structure.

Bitmaps

The bootscreen and custom status screens come from Creality's firmware.