55 lines
1.8 KiB
Plaintext
55 lines
1.8 KiB
Plaintext
* ARM PrimeCells PL080 and PL081 and derivatives DMA controller
|
|
|
|
Required properties:
|
|
- compatible: "arm,pl080", "arm,primecell";
|
|
"arm,pl081", "arm,primecell";
|
|
- reg: Address range of the PL08x registers
|
|
- interrupt: The PL08x interrupt number
|
|
- clocks: The clock running the IP core clock
|
|
- clock-names: Must contain "apb_pclk"
|
|
- lli-bus-interface-ahb1: if AHB master 1 is eligible for fetching LLIs
|
|
- lli-bus-interface-ahb2: if AHB master 2 is eligible for fetching LLIs
|
|
- mem-bus-interface-ahb1: if AHB master 1 is eligible for fetching memory contents
|
|
- mem-bus-interface-ahb2: if AHB master 2 is eligible for fetching memory contents
|
|
- #dma-cells: must be <2>. First cell should contain the DMA request,
|
|
second cell should contain either 1 or 2 depending on
|
|
which AHB master that is used.
|
|
|
|
Optional properties:
|
|
- dma-channels: contains the total number of DMA channels supported by the DMAC
|
|
- dma-requests: contains the total number of DMA requests supported by the DMAC
|
|
- memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32
|
|
64, 128 or 256 bytes are legal values
|
|
- memcpy-bus-width: the bus width used for memcpy: 8, 16 or 32 are legal
|
|
values
|
|
|
|
Clients
|
|
Required properties:
|
|
- dmas: List of DMA controller phandle, request channel and AHB master id
|
|
- dma-names: Names of the aforementioned requested channels
|
|
|
|
Example:
|
|
|
|
dmac0: dma-controller@10130000 {
|
|
compatible = "arm,pl080", "arm,primecell";
|
|
reg = <0x10130000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <15>;
|
|
clocks = <&hclkdma0>;
|
|
clock-names = "apb_pclk";
|
|
lli-bus-interface-ahb1;
|
|
lli-bus-interface-ahb2;
|
|
mem-bus-interface-ahb2;
|
|
memcpy-burst-size = <256>;
|
|
memcpy-bus-width = <32>;
|
|
#dma-cells = <2>;
|
|
};
|
|
|
|
device@40008000 {
|
|
...
|
|
dmas = <&dmac0 0 2
|
|
&dmac0 1 2>;
|
|
dma-names = "tx", "rx";
|
|
...
|
|
};
|