311 lines
11 KiB
C
311 lines
11 KiB
C
/*
|
|
* Freescale GPMI NAND Flash Driver
|
|
*
|
|
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
|
|
* Copyright (C) 2008 Embedded Alley Solutions, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
|
|
#define __DRIVERS_MTD_NAND_GPMI_NAND_H
|
|
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
|
|
#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
|
|
struct resources {
|
|
void __iomem *gpmi_regs;
|
|
void __iomem *bch_regs;
|
|
unsigned int dma_low_channel;
|
|
unsigned int dma_high_channel;
|
|
struct clk *clock[GPMI_CLK_MAX];
|
|
};
|
|
|
|
/**
|
|
* struct bch_geometry - BCH geometry description.
|
|
* @gf_len: The length of Galois Field. (e.g., 13 or 14)
|
|
* @ecc_strength: A number that describes the strength of the ECC
|
|
* algorithm.
|
|
* @page_size: The size, in bytes, of a physical page, including
|
|
* both data and OOB.
|
|
* @metadata_size: The size, in bytes, of the metadata.
|
|
* @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note
|
|
* the first chunk in the page includes both data and
|
|
* metadata, so it's a bit larger than this value.
|
|
* @ecc_chunk_count: The number of ECC chunks in the page,
|
|
* @payload_size: The size, in bytes, of the payload buffer.
|
|
* @auxiliary_size: The size, in bytes, of the auxiliary buffer.
|
|
* @auxiliary_status_offset: The offset into the auxiliary buffer at which
|
|
* the ECC status appears.
|
|
* @block_mark_byte_offset: The byte offset in the ECC-based page view at
|
|
* which the underlying physical block mark appears.
|
|
* @block_mark_bit_offset: The bit offset into the ECC-based page view at
|
|
* which the underlying physical block mark appears.
|
|
*/
|
|
struct bch_geometry {
|
|
unsigned int gf_len;
|
|
unsigned int ecc_strength;
|
|
unsigned int page_size;
|
|
unsigned int metadata_size;
|
|
unsigned int ecc_chunk_size;
|
|
unsigned int ecc_chunk_count;
|
|
unsigned int payload_size;
|
|
unsigned int auxiliary_size;
|
|
unsigned int auxiliary_status_offset;
|
|
unsigned int block_mark_byte_offset;
|
|
unsigned int block_mark_bit_offset;
|
|
};
|
|
|
|
/**
|
|
* struct boot_rom_geometry - Boot ROM geometry description.
|
|
* @stride_size_in_pages: The size of a boot block stride, in pages.
|
|
* @search_area_stride_exponent: The logarithm to base 2 of the size of a
|
|
* search area in boot block strides.
|
|
*/
|
|
struct boot_rom_geometry {
|
|
unsigned int stride_size_in_pages;
|
|
unsigned int search_area_stride_exponent;
|
|
};
|
|
|
|
/* DMA operations types */
|
|
enum dma_ops_type {
|
|
DMA_FOR_COMMAND = 1,
|
|
DMA_FOR_READ_DATA,
|
|
DMA_FOR_WRITE_DATA,
|
|
DMA_FOR_READ_ECC_PAGE,
|
|
DMA_FOR_WRITE_ECC_PAGE
|
|
};
|
|
|
|
/**
|
|
* struct nand_timing - Fundamental timing attributes for NAND.
|
|
* @data_setup_in_ns: The data setup time, in nanoseconds. Usually the
|
|
* maximum of tDS and tWP. A negative value
|
|
* indicates this characteristic isn't known.
|
|
* @data_hold_in_ns: The data hold time, in nanoseconds. Usually the
|
|
* maximum of tDH, tWH and tREH. A negative value
|
|
* indicates this characteristic isn't known.
|
|
* @address_setup_in_ns: The address setup time, in nanoseconds. Usually
|
|
* the maximum of tCLS, tCS and tALS. A negative
|
|
* value indicates this characteristic isn't known.
|
|
* @gpmi_sample_delay_in_ns: A GPMI-specific timing parameter. A negative value
|
|
* indicates this characteristic isn't known.
|
|
* @tREA_in_ns: tREA, in nanoseconds, from the data sheet. A
|
|
* negative value indicates this characteristic isn't
|
|
* known.
|
|
* @tRLOH_in_ns: tRLOH, in nanoseconds, from the data sheet. A
|
|
* negative value indicates this characteristic isn't
|
|
* known.
|
|
* @tRHOH_in_ns: tRHOH, in nanoseconds, from the data sheet. A
|
|
* negative value indicates this characteristic isn't
|
|
* known.
|
|
*/
|
|
struct nand_timing {
|
|
int8_t data_setup_in_ns;
|
|
int8_t data_hold_in_ns;
|
|
int8_t address_setup_in_ns;
|
|
int8_t gpmi_sample_delay_in_ns;
|
|
int8_t tREA_in_ns;
|
|
int8_t tRLOH_in_ns;
|
|
int8_t tRHOH_in_ns;
|
|
};
|
|
|
|
enum gpmi_type {
|
|
IS_MX23,
|
|
IS_MX28,
|
|
IS_MX6Q,
|
|
IS_MX6SX
|
|
};
|
|
|
|
struct gpmi_devdata {
|
|
enum gpmi_type type;
|
|
int bch_max_ecc_strength;
|
|
int max_chain_delay; /* See the async EDO mode */
|
|
};
|
|
|
|
struct gpmi_nand_data {
|
|
/* flags */
|
|
#define GPMI_ASYNC_EDO_ENABLED (1 << 0)
|
|
#define GPMI_TIMING_INIT_OK (1 << 1)
|
|
int flags;
|
|
const struct gpmi_devdata *devdata;
|
|
|
|
/* System Interface */
|
|
struct device *dev;
|
|
struct platform_device *pdev;
|
|
|
|
/* Resources */
|
|
struct resources resources;
|
|
|
|
/* Flash Hardware */
|
|
struct nand_timing timing;
|
|
int timing_mode;
|
|
|
|
/* BCH */
|
|
struct bch_geometry bch_geometry;
|
|
struct completion bch_done;
|
|
|
|
/* NAND Boot issue */
|
|
bool swap_block_mark;
|
|
struct boot_rom_geometry rom_geometry;
|
|
|
|
/* MTD / NAND */
|
|
struct nand_chip nand;
|
|
|
|
/* General-use Variables */
|
|
int current_chip;
|
|
unsigned int command_length;
|
|
|
|
/* passed from upper layer */
|
|
uint8_t *upper_buf;
|
|
int upper_len;
|
|
|
|
/* for DMA operations */
|
|
bool direct_dma_map_ok;
|
|
|
|
struct scatterlist cmd_sgl;
|
|
char *cmd_buffer;
|
|
|
|
struct scatterlist data_sgl;
|
|
char *data_buffer_dma;
|
|
|
|
void *page_buffer_virt;
|
|
dma_addr_t page_buffer_phys;
|
|
unsigned int page_buffer_size;
|
|
|
|
void *payload_virt;
|
|
dma_addr_t payload_phys;
|
|
|
|
void *auxiliary_virt;
|
|
dma_addr_t auxiliary_phys;
|
|
|
|
void *raw_buffer;
|
|
|
|
/* DMA channels */
|
|
#define DMA_CHANS 8
|
|
struct dma_chan *dma_chans[DMA_CHANS];
|
|
enum dma_ops_type last_dma_type;
|
|
enum dma_ops_type dma_type;
|
|
struct completion dma_done;
|
|
|
|
/* private */
|
|
void *private;
|
|
};
|
|
|
|
/**
|
|
* struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
|
|
* @data_setup_in_cycles: The data setup time, in cycles.
|
|
* @data_hold_in_cycles: The data hold time, in cycles.
|
|
* @address_setup_in_cycles: The address setup time, in cycles.
|
|
* @device_busy_timeout: The timeout waiting for NAND Ready/Busy,
|
|
* this value is the number of cycles multiplied
|
|
* by 4096.
|
|
* @use_half_periods: Indicates the clock is running slowly, so the
|
|
* NFC DLL should use half-periods.
|
|
* @sample_delay_factor: The sample delay factor.
|
|
* @wrn_dly_sel: The delay on the GPMI write strobe.
|
|
*/
|
|
struct gpmi_nfc_hardware_timing {
|
|
/* for HW_GPMI_TIMING0 */
|
|
uint8_t data_setup_in_cycles;
|
|
uint8_t data_hold_in_cycles;
|
|
uint8_t address_setup_in_cycles;
|
|
|
|
/* for HW_GPMI_TIMING1 */
|
|
uint16_t device_busy_timeout;
|
|
#define GPMI_DEFAULT_BUSY_TIMEOUT 0x500 /* default busy timeout value.*/
|
|
|
|
/* for HW_GPMI_CTRL1 */
|
|
bool use_half_periods;
|
|
uint8_t sample_delay_factor;
|
|
uint8_t wrn_dly_sel;
|
|
};
|
|
|
|
/**
|
|
* struct timing_threshod - Timing threshold
|
|
* @max_data_setup_cycles: The maximum number of data setup cycles that
|
|
* can be expressed in the hardware.
|
|
* @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires
|
|
* for data read internal setup. In the Reference
|
|
* Manual, see the chapter "High-Speed NAND
|
|
* Timing" for more details.
|
|
* @max_sample_delay_factor: The maximum sample delay factor that can be
|
|
* expressed in the hardware.
|
|
* @max_dll_clock_period_in_ns: The maximum period of the GPMI clock that the
|
|
* sample delay DLL hardware can possibly work
|
|
* with (the DLL is unusable with longer periods).
|
|
* If the full-cycle period is greater than HALF
|
|
* this value, the DLL must be configured to use
|
|
* half-periods.
|
|
* @max_dll_delay_in_ns: The maximum amount of delay, in ns, that the
|
|
* DLL can implement.
|
|
* @clock_frequency_in_hz: The clock frequency, in Hz, during the current
|
|
* I/O transaction. If no I/O transaction is in
|
|
* progress, this is the clock frequency during
|
|
* the most recent I/O transaction.
|
|
*/
|
|
struct timing_threshod {
|
|
const unsigned int max_chip_count;
|
|
const unsigned int max_data_setup_cycles;
|
|
const unsigned int internal_data_setup_in_ns;
|
|
const unsigned int max_sample_delay_factor;
|
|
const unsigned int max_dll_clock_period_in_ns;
|
|
const unsigned int max_dll_delay_in_ns;
|
|
unsigned long clock_frequency_in_hz;
|
|
|
|
};
|
|
|
|
/* Common Services */
|
|
extern int common_nfc_set_geometry(struct gpmi_nand_data *);
|
|
extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
|
|
extern void prepare_data_dma(struct gpmi_nand_data *,
|
|
enum dma_data_direction dr);
|
|
extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
|
|
struct dma_async_tx_descriptor *);
|
|
extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
|
|
struct dma_async_tx_descriptor *);
|
|
|
|
/* GPMI-NAND helper function library */
|
|
extern int gpmi_init(struct gpmi_nand_data *);
|
|
extern int gpmi_extra_init(struct gpmi_nand_data *);
|
|
extern void gpmi_clear_bch(struct gpmi_nand_data *);
|
|
extern void gpmi_dump_info(struct gpmi_nand_data *);
|
|
extern int bch_set_geometry(struct gpmi_nand_data *);
|
|
extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
|
|
extern int gpmi_send_command(struct gpmi_nand_data *);
|
|
extern void gpmi_begin(struct gpmi_nand_data *);
|
|
extern void gpmi_end(struct gpmi_nand_data *);
|
|
extern int gpmi_read_data(struct gpmi_nand_data *);
|
|
extern int gpmi_send_data(struct gpmi_nand_data *);
|
|
extern int gpmi_send_page(struct gpmi_nand_data *,
|
|
dma_addr_t payload, dma_addr_t auxiliary);
|
|
extern int gpmi_read_page(struct gpmi_nand_data *,
|
|
dma_addr_t payload, dma_addr_t auxiliary);
|
|
|
|
void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
|
|
const u8 *src, size_t src_bit_off,
|
|
size_t nbits);
|
|
|
|
/* BCH : Status Block Completion Codes */
|
|
#define STATUS_GOOD 0x00
|
|
#define STATUS_ERASED 0xff
|
|
#define STATUS_UNCORRECTABLE 0xfe
|
|
|
|
/* Use the devdata to distinguish different Archs. */
|
|
#define GPMI_IS_MX23(x) ((x)->devdata->type == IS_MX23)
|
|
#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
|
|
#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
|
|
#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
|
|
|
|
#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
|
|
#endif
|