wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Rewrite of the Chiron pin mapping.

Browse Source
This commit is contained in:
Knutwurst
2021-04-10 15:51:26 +02:00
parent 090f82814a
commit 0033b9a289
7 changed files with 879 additions and 127 deletions
Download Patch File Download Diff File Expand all files Collapse all files

138
Marlin/Configuration.h
View File

@@ -42,115 +42,29 @@
#define ANYCUBIC_FILAMENT_RUNOUT_SENSOR
#define KNUTWURST_SPECIAL_MENU
#define KNUTWURST_SPECIAL_MENU_WO_SD
//#define KNUTWURST_MEGA_P_LASER
//#define ANYCUBIC_TFT_DEBUG
//#define POWER_OUTAGE_TEST
/*******************************************************************************************
** **
** **
** WARNING: **
** THE FOLLOWING SETTINGS ARE NORMALLY SET BY PLATFORMIO! **
** **
** IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT **
** TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT! **
** OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END **
** UP WITH A NON FUNCTIONING FIRMWARE! **
** **
** If you want to select a specific configuration for your **
** printer, just open the PlatformIO tab on the left, select **
** PROJECT TASKS and then "env:i3_MEGA*" (your desired config) **
** From there you can build and upload your code. **
** **
** **
*******************************************************************************************/
/*
* Select your printer.
* DO NOT ENABLE MORE THAN ONE LINE!
*
* MEGA is the normal i3 Version without spool holder and the cassic extruder
* MEGA_S is the S version with Titan clone extruder
* MEGA_X is the big version with 310x310mm Bed
* MEGA_P is the "Pro" Version with BMG Extruder, 2 TMC Steppers and Laser
*
* PLEASE READ THE WARNING ABOVE!
*
*/
//#define KNUTWURST_MEGA // DO
//#define KNUTWURST_MEGA_S // NOT
//#define KNUTWURST_MEGA_X // UNCOMMENT
//#define KNUTWURST_MEGA_P // THESE
//#define KNUTWURST_CHIRON // SETTINGS !
/*
* If you own the first generation i3 Mega
* with only one Z endstop, you need to activate
* KNUTWURST_MEGA and also this to disable
* the left endstop and switch the Z Motors.
*
* If the option is disabled, two Z endstops
* are used by default.
*
* PLEASE READ THE WARNING ABOVE!
*
*/
//#define KNUTWURST_ONE_Z_ENDSTOP // DO NOT UNCOMMENT! USE PLATFORMIO TO BUILD THE FW FOR YOUR PRINTER!
/*
* If you have defined the MEGA_X or if
* you have the "new" Mega S with the blue/yellow
* Touchscreen display, you need to enable the
* DGUS2 switch to get the special menu to work
*
* PLEASE READ THE WARNING ABOVE!
*
*/
//#define KNUTWURST_DGUS2_TFT // DO NOT UNCOMMENT! USE PLATFORMIO TO BUILD THE FW FOR YOUR PRINTER!
/*
* Enable Support for Trinamic Stepper drivers.
* This also inverts the X,Y,Z and Extruder motor
* outputs/directions.
*
* PLEASE READ THE WARNING ABOVE!
*/
//#define KNUTWURST_TMC // DO NOT UNCOMMENT! USE PLATFORMIO TO BUILD THE FW FOR YOUR PRINTER!
/*
* Invert E0 Stepper driver for
* Bondtech Mini Geared (BMG) Extruders
*
* This flag is mandatory if you own a
* MEGA Pro, which has this Extruder by
* default.
*
*/
//#define KNUTWURST_BMG
/*
* This enables the BLTouch Support and also
* activates the BLTouch Menu item in the
* special menu. It also removes all manual
* leveling features because they are not
* neccessary at all.
*
* PLEASE READ THE WARNING ABOVE!
*
*/
//#define KNUTWURST_BLTOUCH // DO NOT UNCOMMENT! USE PLATFORMIO TO BUILD THE FW FOR YOUR PRINTER!
/*
* This feature is for debugging purpose only.
* It enabled more console output and should be
* disabled in production. It can cause the
* printer to stutter.
*
* PLEASE READ THE WARNING ABOVE!
*/
//#define KNUTWURST_DEBUG
/*
* This enabled the integrated Laser engaving feature
* in the anycubic touchscreen. It's currently only
* supported by the Anycubic MEGA Pro and therefore it
* is automatically set if the MEGA_P is enabled.
*
*/
//#define KNUTWURST_DEBUG // DO NOT UNCOMMENT! USE PLATFORMIO TO BUILD THE FW FOR YOUR PRINTER!
#if ENABLED(KNUTWURST_MEGA_P)
//#define KNUTWURST_MEGA_P_LASER
#endif
/*
* This enabled the integrated leveling features
@@ -158,32 +72,11 @@
* supported by the Anycubic Chiron and therefore it
* is automatically set if the chiron is enabled.
*
* PLEASE READ THE WARNING ABOVE!
*
*/
#if ENABLED(KNUTWURST_CHIRON)
//#define KNUTWURST_TFT_LEVELING
#endif
/*******************************************************************************************
** **
** **
** WARNING: **
** THE SETTINGS ABOVE ARE NORMALLY SET BY PLATFORMIO! **
** **
** IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT **
** TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT! **
** OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END **
** UP WITH A NON FUNCTIONING FIRMWARE! **
** **
** If you want to select a specific configuration for your **
** printer, just open the PlatformIO tab on the left, select **
** PROJECT TASKS and then "env:i3_MEGA*" (your desired config) **
** From there you can build and upload your code. **
** **
** **
*******************************************************************************************/
/*
* Here you can set the default preheat-Temperatures
@@ -292,9 +185,10 @@
*
* BOARD_TRIGORILLA_14 = Default Trigorilla
* BOARD_TRIGORILLA_14_11 = Newer Trigorilla v1.1 (first seen late 2018)
* BOARD_TRIGORILLA_CHIRON = EFB Version for Anycubic Chiron
*
* The only major difference is a slight change on the servo pin mapping.
* This setting only is relevant if you want to use BLtouch or similar
* The only major difference between 14 and 14_11 is a slight change on the servo
* pin mapping. This setting only is relevant if you want to use BLtouch or similar
* mods to be used via servo pins.
* The new version is to be identified by a "TRIGORILLA1.1" lettering
* on the upper left of the PCB silkscreen.