wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Set correct filament sensor pins for chiron in correspondig header and enable new file list implementation.

Browse Source
This commit is contained in:
Knutwurst
2023-05-29 20:34:08 +02:00
parent 9244ea5890
commit 1df0ee59d2
4 changed files with 91 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
Marlin/Configuration_adv.h
View File

@@ -2678,11 +2678,11 @@
// For direct drive, the full length of the nozzle.
#else
#define PAUSE_PARK_RETRACT_FEEDRATE 40 // (mm/s) Initial retract feedrate.
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
#define PAUSE_PARK_RETRACT_LENGTH 1 // (mm) Initial retract.
// This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 25 // (mm) The length of filament for a complete unload.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 0 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 30 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload.
// For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading.
@@ -2690,8 +2690,8 @@
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
// 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 10 // (mm) Load length of filament, from extruder gear to nozzle.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 10 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 5 // (mm) Load length of filament, from extruder gear to nozzle.
// For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle.
#endif

88
Marlin/src/lcd/extui/knutwurst/anycubic_touchscreen.cpp
View File

@@ -1043,13 +1043,15 @@ void AnycubicTouchscreenClass::RenderCurrentFileList() {
SENDLINE_PGM(SM_SPECIAL_MENU_L);
}
else {
if (CodeSeen('S'))
if (CodeSeen('S')) {
selectedNumber = CodeValue();
}
if (SpecialMenu)
if (SpecialMenu) {
RenderSpecialMenu(selectedNumber);
else if (selectedNumber <= currentFileList.count())
} else if (selectedNumber <= currentFileList.count()) {
RenderCurrentFolder(selectedNumber);
}
}
SENDLINE_PGM("END"); // Filelist stop
}
@@ -1278,24 +1280,90 @@ void AnycubicTouchscreenClass::RenderCurrentFolder(uint16_t selectedNumber) {
SERIAL_ECHOLNPGM(SM_DIR_UP_L);
#endif
}
}
else {
} else {
currentFileList.seek(count - 1, false);
#if ENABLED(ANYCUBIC_LCD_DEBUG)
SERIAL_ECHOLN(currentFileList.filename());
#endif
/*
if (currentFileList.isDir()) {
SEND_PGM("/");
SENDLINE(currentFileList.shortFilename());
SEND_PGM("/");
SENDLINE(currentFileList.filename());
}
else {
} else {
SENDLINE(currentFileList.shortFilename());
SENDLINE(currentFileList.filename());
}
*/
// The longname may not be filed, so we use the built-in fallback here.
const char* fileName = currentFileList.filename();
int fileNameLen = strlen(fileName);
bool fileNameWasCut = false;
// Cut off too long filenames.
// They don't fit on the screen anyway.
#if ENABLED(KNUTWURST_DGUS2_TFT)
if (fileNameLen >= MAX_PRINTABLE_FILENAME_LEN) {
fileNameWasCut = true;
fileNameLen = MAX_PRINTABLE_FILENAME_LEN;
}
#endif
char outputString[fileNameLen];
// Bugfix for non-printable special characters
// which are now replaced by underscores.
for (unsigned char i = 0; i <= fileNameLen; i++) {
if (i >= fileNameLen) {
outputString[i] = ' ';
}
else {
outputString[i] = fileName[i];
if (!isPrintable(outputString[i]))
outputString[i] = '_';
}
}
// I know, it's ugly, but it's faster than a string lib
if (fileNameWasCut) {
outputString[fileNameLen - 7] = '~';
outputString[fileNameLen - 6] = '.';
outputString[fileNameLen - 5] = 'g';
outputString[fileNameLen - 4] = 'c';
outputString[fileNameLen - 3] = 'o';
outputString[fileNameLen - 2] = 'd';
outputString[fileNameLen - 1] = 'e';
}
outputString[fileNameLen] = '\0';
if (currentFileList.isDir()) {
#if ENABLED(KNUTWURST_DGUS2_TFT)
SEND_PGM("/");
SEND(currentFileList.shortFilename());
SENDLINE_PGM(".GCO");
SEND_PGM("/");
SEND(outputString);
SENDLINE_PGM(".gcode");
#else
SEND_PGM("/");
SEND(currentFileList.shortFilename());
SEND_PGM("/");
SENDLINE(outputString);
#endif
SERIAL_ECHO(count);
SERIAL_ECHOPGM(": /");
SERIAL_ECHOLN(outputString);
} else {
SENDLINE(currentFileList.shortFilename());
SENDLINE(outputString);
SERIAL_ECHO(count);
SERIAL_ECHOPGM(": ");
SERIAL_ECHOLN(outputString);
}
}
}
}
@@ -1546,8 +1614,8 @@ void AnycubicTouchscreenClass::RenderCurrentFolder(uint16_t selectedNumber) {
#endif
{
if (CodeSeen('S')) filenumber = CodeValue();
PrintList();
//RenderCurrentFileList();
//PrintList();
RenderCurrentFileList();
}
#endif
break;

6
Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
View File

@@ -86,6 +86,12 @@
#define OUTAGECON_PIN 58
#endif
#if ANY(KNUTWURST_CHIRON, KNUTWURST_4MAXP2)
#define FIL_RUNOUT_PIN 33
#else
#define FIL_RUNOUT_PIN 19
#endif
#if ENABLED(TRIGORILLA_MAPPING_CHIRON)
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 33

2
Marlin/src/pins/ramps/pins_TRIGORILLA_CHIRON.h
View File

@@ -64,7 +64,7 @@
#define TG_FAN1_PIN 7 // Anycubic Kossel: Unused
#define TG_FAN2_PIN 44 // Anycubic Kossel: Hotend fan
#define CONTROLLER_FAN_PIN TG_FAN1_PIN
#define FIL_RUNOUT_PIN 19
#define FIL_RUNOUT_PIN 33
#define BEEPER_PIN 31
#define SDSS 53
#define LED_PIN 13