wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Add full 4MAX Pro 2.0 configuration including case light. This might be buggy regadring motor directions and has to be tested!

Browse Source
This commit is contained in:
Knutwurst
2021-10-29 18:12:06 +02:00
parent 2368fe1a55
commit 4a58b4b093
5 changed files with 149 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

142
Marlin/Configuration.h
View File

@@ -51,7 +51,10 @@
#define ANYCUBIC_TOUCHSCREEN
#define ANYCUBIC_FILAMENT_RUNOUT_SENSOR
#if DISABLED(KNUTWURST_4MAXP2)
#define ANYCUBIC_FILAMENT_RUNOUT_SENSOR
#endif
#define KNUTWURST_SPECIAL_MENU
#define KNUTWURST_SPECIAL_MENU_WO_SD
//#define ANYCUBIC_TFT_DEBUG
@@ -69,7 +72,7 @@
/*
* This enabled the integrated Laser engaving feature
* This enables the integrated Laser engaving feature
* in the anycubic touchscreen. It's currently only
* supported by the Anycubic MEGA Pro and therefore it
* is automatically set if the MEGA_P is enabled.
@@ -81,7 +84,7 @@
/*
* This enabled the integrated leveling features
* This enables the integrated leveling features
* in the anycubic touchscreen. It's currently only
* supported by the Anycubic Chiron and therefore it
* is automatically set if the chiron is enabled.
@@ -91,6 +94,16 @@
#define KNUTWURST_TFT_LEVELING
#endif
/*
* To ensure the correct endstop configuration,
* this has to be enabled to alter the motherboard
* configuration for the 4MAX printer family
*/
#if ENABLED(KNUTWURST_4MAXP2)
#define ANYCUBIC_4_MAX_PRO_ENDSTOPS
#endif
/*
* Here you can set the default preheat-Temperatures
* which are set when you use the builtin preheat
@@ -502,7 +515,11 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*/
#define TEMP_SENSOR_0 5
#if ENABLED(KNUTWURST_4MAXP2)
#define TEMP_SENSOR_0 1
#else
#define TEMP_SENSOR_0 5
#endif
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
@@ -510,7 +527,14 @@
#define TEMP_SENSOR_5 0
#define TEMP_SENSOR_6 0
#define TEMP_SENSOR_7 0
#define TEMP_SENSOR_BED 1
#if ENABLED(KNUTWURST_4MAXP2)
#define TEMP_SENSOR_BED 5
#else
#define TEMP_SENSOR_BED 1
#endif
#define TEMP_SENSOR_PROBE 0
#define TEMP_SENSOR_CHAMBER 0
@@ -597,6 +621,12 @@
#define DEFAULT_Kd 106.55
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_Kp 17.13
#define DEFAULT_Ki 0.93
#define DEFAULT_Kd 78.58
#endif
#endif // PIDTEMP
//===========================================================================
@@ -650,6 +680,11 @@
#define DEFAULT_bedKd 1675.16
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_bedKp 251.78
#define DEFAULT_bedKi 49.57
#define DEFAULT_bedKd 319.73
#endif
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
@@ -765,7 +800,7 @@
//#define ENDSTOPPULLDOWN_ZMIN_PROBE
#endif
#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_4MAXP2)
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
@@ -877,7 +912,7 @@
* X, Y, Z, E0 [, E1[, E2...]]
*/
#if ENABLED(KNUTWURST_MEGA)
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 }
#endif
#if ENABLED(KNUTWURST_MEGA_S)
@@ -896,6 +931,9 @@
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 100, 400, 415 }
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 80, 800, 422 }
#endif
/**
@@ -936,6 +974,10 @@
#endif
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_MAX_FEEDRATE { 150, 150, 25, 30 }
#endif
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -961,6 +1003,10 @@
#define DEFAULT_MAX_ACCELERATION { 350, 350, 50, 20000 }
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 60, 10000 }
#endif
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1011,6 +1057,12 @@
#define DEFAULT_TRAVEL_ACCELERATION 350 // X, Y, Z acceleration for travel (non printing) moves
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
#endif
/**
* Default Jerk limits (mm/s)
* Override with M205 X Y Z E
@@ -1043,6 +1095,12 @@
#define DEFAULT_ZJERK 0.4
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_XJERK 4
#define DEFAULT_YJERK 4
#define DEFAULT_ZJERK 0.4
#endif
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
//#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
@@ -1063,6 +1121,10 @@
#define DEFAULT_EJERK 8.0 // May be used by Linear Advance
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_EJERK 6.0 // May be used by Linear Advance
#endif
/**
* Junction Deviation Factor
*
@@ -1082,6 +1144,10 @@
#if ENABLED(KNUTWURST_CHIRON)
#define JUNCTION_DEVIATION_MM 0.018 // (mm) Distance from real junction edge
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge
#endif
#endif
/**
@@ -1439,6 +1505,29 @@
#define INVERT_E6_DIR false
#define INVERT_E7_DIR false
#endif
#if ENABLED(KNUTWURST_4MAXP2)
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors
#define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
#define INVERT_Z_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#if ENABLED(KNUTWURST_BMG)
#define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
#else
#define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
#endif
#define INVERT_E1_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
#define INVERT_E2_DIR false
#define INVERT_E3_DIR false
#define INVERT_E4_DIR false
#define INVERT_E5_DIR false
#define INVERT_E6_DIR false
#define INVERT_E7_DIR false
#endif
#endif
#if ENABLED(KNUTWURST_TMC)
@@ -1509,6 +1598,29 @@
#define INVERT_E6_DIR false
#define INVERT_E7_DIR false
#endif
#if ENABLED(KNUTWURST_4MAXP2)
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors
#define INVERT_Y_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
#define INVERT_Z_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#if ENABLED(KNUTWURST_BMG)
#define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
#else
#define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
#endif
#define INVERT_E1_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
#define INVERT_E2_DIR false
#define INVERT_E3_DIR false
#define INVERT_E4_DIR false
#define INVERT_E5_DIR false
#define INVERT_E6_DIR false
#define INVERT_E7_DIR false
#endif
#endif
// @section homing
@@ -1583,6 +1695,16 @@
#define Y_MAX_POS Y_BED_SIZE +10
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define X_MIN_POS -6
#define Y_MIN_POS 0
#define Z_MIN_POS 0
#define X_BED_SIZE 270
#define Y_BED_SIZE 210
#define Z_MAX_POS 190
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE
#endif
/**
* Software Endstops
@@ -1881,6 +2003,12 @@
#define HOMING_FEEDRATE_Z (6*60)
#endif
#if ENABLED(KNUTWURST_4MAXP2)
// Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (40*60)
#define HOMING_FEEDRATE_Z (4*60)
#endif
// Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS

9
Marlin/Configuration_adv.h
View File

@@ -477,12 +477,15 @@
/**
* M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE
#if ENABLED(KNUTWURST_4MAXP2)
#define CASE_LIGHT_ENABLE
#endif
#if ENABLED(CASE_LIGHT_ENABLE)
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
#define CASE_LIGHT_PIN 45 // Override the default pin if needed
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin)
//#define CASE_LIGHT_MAX_PWM 128 // Limit pwm
//#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
//#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.

2
Marlin/src/inc/Version.h
View File

@@ -41,7 +41,7 @@
* here we define this default string as the date where the latest release
* version was tagged.
*/
#define CUSTOM_BUILD_VERSION "1.3.1"
#define CUSTOM_BUILD_VERSION "1.3.2"
#ifndef STRING_DISTRIBUTION_DATE
#define STRING_DISTRIBUTION_DATE "2021-09-23"

10
i3_mega_envs.ini
View File

@@ -507,15 +507,15 @@ build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNU
# 4MAX Pro 2.0
#
[env: 4MAXP2]
[env:4MAXP2]
platform = atmelavr
board = megaatmega2560
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/AVR>
build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_DGUS2_TFT
build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON -DKNUTWURST_BMG
[env:4MAXP2_TMC]
@@ -525,5 +525,5 @@ board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/AVR>
build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_TMC -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT
build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON -DKNUTWURST_BMG

2
platformio.ini
View File

@@ -77,6 +77,8 @@ default_envs =
CHIRON_TMC
CHIRON_DGUS
CHIRON_DGUS_TMC
4MAXP2
4MAXP2_TMC
# *******************************************************************************************
# ** **