wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Substiture KNUTWURST_TFT_LEVELING flag with KNUTWURST_CHIRON.

Browse Source
This commit is contained in:
Knutwurst
2023-06-14 10:35:01 +02:00
parent e0bb686818
commit 4df951c501
4 changed files with 23 additions and 43 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
Marlin/Configuration.h
View File

@@ -38,14 +38,11 @@
#define CONFIGURATION_H_VERSION 02010201
#define ANYCUBIC_TOUCHSCREEN
#define KNUTWURST_SPECIAL_MENU
#define KNUTWURST_SPECIAL_MENU_WO_SD
// #define ANYCUBIC_TFT_DEBUG
// #define POWER_OUTAGE_TEST
#define LCD_SERIAL_PORT 3
#define EXT_LEVEL_HIGH 0.1
/*
* This feature is for debugging purpose only.
* It enabled more console output and should be
@@ -76,18 +73,6 @@
// #define KNUTWURST_MEGA_P_LASER
#endif
/*
* This enables the integrated leveling features
* in the anycubic touchscreen. It's currently only
* supported by the Anycubic Chiron and therefore it
* is automatically set if the chiron is enabled.
*
*/
#if ENABLED(KNUTWURST_CHIRON)
#define KNUTWURST_TFT_LEVELING
#endif
/*
* To ensure the correct endstop configuration,
* this has to be enabled to alter the motherboard
@@ -197,8 +182,8 @@
* Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
// #define SERIAL_PORT_2 2
// #define BAUDRATE_2 500000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
#define SERIAL_PORT_2 2
#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
/**
* Select a third serial port on the board to use for communication with the host.
@@ -1652,7 +1637,7 @@
* Use G29 repeatedly, adjusting the Z height at each point with movement commands
* or (with LCD_BED_LEVELING) the LCD controller.
*/
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_CHIRON)
#define PROBE_MANUALLY
#endif
@@ -1671,7 +1656,7 @@
/**
* Z Servo Probe, such as an endstop switch on a rotating arm.
*/
#if ENABLED(KNUTWURST_TFT_LEVELING)
#if ENABLED(KNUTWURST_CHIRON)
#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
#endif
@@ -1838,11 +1823,11 @@
// #define NOZZLE_TO_PROBE_OFFSET { 29, -15, 0 } //X-Carriage
#endif
#if ENABLED(KNUTWURST_TFT_LEVELING)
#if ENABLED(KNUTWURST_CHIRON)
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.8 }
#endif
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_CHIRON)
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
#endif
@@ -2470,7 +2455,7 @@
* leveling in steps so you can manually adjust the Z height at each grid-point.
* With an LCD controller the process is guided step-by-step.
*/
#if EITHER(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
#if EITHER(KNUTWURST_BLTOUCH, KNUTWURST_CHIRON)
// #define AUTO_BED_LEVELING_3POINT
// #define AUTO_BED_LEVELING_LINEAR
#define AUTO_BED_LEVELING_BILINEAR
@@ -2478,7 +2463,7 @@
// #define MESH_BED_LEVELING
#endif
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_CHIRON)
// #define AUTO_BED_LEVELING_3POINT
// #define AUTO_BED_LEVELING_LINEAR
// #define AUTO_BED_LEVELING_BILINEAR
@@ -3985,7 +3970,7 @@
* Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support.
*/
#if ENABLED(KNUTWURST_TFT_LEVELING)
#if ENABLED(KNUTWURST_CHIRON)
#define NUM_SERVOS 1 // Note: Servo index starts with 0 for M280-M282 commands
#endif