wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Make BLTouch leveling more reliable

Browse Source
This commit is contained in:
Knutwurst
2020-09-11 07:52:03 +02:00
parent 2a0542ce83
commit 51a8226932
1 changed files with 19 additions and 18 deletions
Download Patch File Download Diff File Expand all files Collapse all files

37
Marlin/Configuration.h
View File

@@ -1014,6 +1014,7 @@
#else
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#endif
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
#endif
@@ -1146,7 +1147,7 @@
*
*/
#if ENABLED(KNUTWURST_BLTOUCH)
#define Z_MIN_PROBE_PIN 2 // Pin 32 is the RAMPS default
#define Z_MIN_PROBE_PIN 2 // Pin 32 is the RAMPS default
#endif
/**
@@ -1189,7 +1190,7 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
#if ENABLED(KNUTWURST_BLTOUCH)
#define BLTOUCH
#define BLTOUCH
#endif
/**
@@ -1263,12 +1264,12 @@
* Specify a Probe position as { X, Y, Z }
*/
#if ENABLED(KNUTWURST_BLTOUCH)
#define NOZZLE_TO_PROBE_OFFSET { -2, -25, 0 } //https://www.thingiverse.com/thing:2824005
//#define NOZZLE_TO_PROBE_OFFSET { 29, -15, 0 } //X-Carriage
#define NOZZLE_TO_PROBE_OFFSET { -2, -25, 0 } //https://www.thingiverse.com/thing:2824005
//#define NOZZLE_TO_PROBE_OFFSET { 29, -15, 0 } //X-Carriage
#endif
#if DISABLED(KNUTWURST_BLTOUCH)
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
#endif
// Most probes should stay away from the edges of the bed, but
@@ -1316,11 +1317,11 @@
//#define Z_AFTER_PROBING 5 // Z position after probing is done
#if ENABLED(KNUTWURST_BLTOUCH)
#define Z_PROBE_LOW_POINT -5 // Farthest distance below the trigger-point to go before stopping
#define Z_PROBE_LOW_POINT -10 // Farthest distance below the trigger-point to go before stopping
#endif
#if DISABLED(KNUTWURST_BLTOUCH)
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
#endif
@@ -1330,7 +1331,7 @@
// Enable the M48 repeatability test to test probe accuracy
#if ENABLED(KNUTWURST_BLTOUCH)
#define Z_MIN_PROBE_REPEATABILITY_TEST
#define Z_MIN_PROBE_REPEATABILITY_TEST
#endif
// Before deploy/stow pause for user confirmation
@@ -1613,19 +1614,19 @@
* With an LCD controller the process is guided step-by-step.
*/
#if ENABLED(KNUTWURST_BLTOUCH)
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING
#endif
#if DISABLED(KNUTWURST_BLTOUCH)
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
#define MESH_BED_LEVELING
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
#define MESH_BED_LEVELING
#endif
/**