- Set MINTEMP to 1 degree celsius

- Bump Verison to 1.1.9
- Bump distribution date
- Add CodeValueInt function to prepare Laser support

Marlin/Configuration.h

@@ -595,28 +595,28 @@
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.
-#define HEATER_0_MINTEMP   5
-#define HEATER_1_MINTEMP   5
-#define HEATER_2_MINTEMP   5
-#define HEATER_3_MINTEMP   5
-#define HEATER_4_MINTEMP   5
-#define HEATER_5_MINTEMP   5
-#define HEATER_6_MINTEMP   5
-#define HEATER_7_MINTEMP   5
-#define BED_MINTEMP        5
+#define HEATER_0_MINTEMP   1
+#define HEATER_1_MINTEMP   1
+#define HEATER_2_MINTEMP   1
+#define HEATER_3_MINTEMP   1
+#define HEATER_4_MINTEMP   1
+#define HEATER_5_MINTEMP   1
+#define HEATER_6_MINTEMP   1
+#define HEATER_7_MINTEMP   1
+#define BED_MINTEMP        1
 
 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
 #define HEATER_0_MAXTEMP 400
-#define HEATER_1_MAXTEMP 275
-#define HEATER_2_MAXTEMP 275
-#define HEATER_3_MAXTEMP 275
-#define HEATER_4_MAXTEMP 275
-#define HEATER_5_MAXTEMP 275
-#define HEATER_6_MAXTEMP 275
-#define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP      200
+#define HEATER_1_MAXTEMP 400
+#define HEATER_2_MAXTEMP 400
+#define HEATER_3_MAXTEMP 400
+#define HEATER_4_MAXTEMP 400
+#define HEATER_5_MAXTEMP 400
+#define HEATER_6_MAXTEMP 400
+#define HEATER_7_MAXTEMP 400
+#define BED_MAXTEMP      180
 
 //===========================================================================
 //============================= PID Settings ================================

Marlin/src/inc/Version.h

@@ -41,10 +41,10 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
- #define CUSTOM_BUILD_VERSION "1.1.8.1"
+ #define CUSTOM_BUILD_VERSION "1.1.9"
 
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2021-01-01"
+  #define STRING_DISTRIBUTION_DATE "2021-01-13"
 #endif
 
 /**

Marlin/src/lcd/anycubic_touchscreen.cpp

@@ -428,6 +428,11 @@ void AnycubicTouchscreenClass::ParkAfterStop()
 #endif
 }
 
+int AnycubicTouchscreenClass::CodeValueInt()
+{
+  return (atoi(&TFTcmdbuffer[TFTbufindr][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindr] + 1]));
+}
+
 float AnycubicTouchscreenClass::CodeValue()
 {
   return (strtod(&TFTcmdbuffer[TFTbufindr][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindr] + 1], NULL));
@@ -1806,8 +1811,8 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
           else if (CodeSeen('C'))
             ;
         }
-          HARDWARE_SERIAL_ENTER();
-          break;
+        HARDWARE_SERIAL_ENTER();
+        break;
         case 33: // A33 get version info
         {
           HARDWARE_SERIAL_PROTOCOLPGM("J33 ");

Marlin/src/lcd/anycubic_touchscreen.h

@@ -252,7 +252,7 @@ private:
   } OutageData;
 #endif
 
-
+  int CodeValueInt();
   float CodeValue();
   bool CodeSeen(char);
   void PrintList();
@@ -284,6 +284,7 @@ private:
   char FilamentTestStatus = false;
   char FilamentTestLastStatus = false;
   bool FilamentSetMillis = true;
+  int FilamentRunoutCounter = 0;
 #endif
 };