wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Merge upstream changes from Marlin 2.1.2

Browse Source
This commit is contained in:
Stefan Kalscheuer
2022-12-19 15:23:45 +01:00
parent fe9ea826a5
commit 67c7ce7b79
427 changed files with 10732 additions and 7834 deletions
Download Patch File Download Diff File Expand all files Collapse all files

107
Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
View File

@@ -40,78 +40,97 @@
//
// PWM FETS
//
#if EITHER(FET_ORDER_EEF, FET_ORDER_EEB)
#define MOSFET_B_PIN 45 // HEATER1
#elif FET_ORDER_EFB
#define MOSFET_B_PIN 9 // FAN0
#else
#define MOSFET_B_PIN 7 // FAN1
#endif
#if FET_ORDER_EEB
#define MOSFET_C_PIN 8 // BED
#elif FET_ORDER_EFB
#if DISABLED(ANYCUBIC_LCD_CHIRON)
#define MOSFET_C_PIN 8
#else
#define MOSFET_C_PIN 45
#endif
#else // EEF, EFF
#define MOSFET_C_PIN 9
#endif
#if FET_ORDER_EEB
#define FAN_PIN 9 // Override pin 4 in pins_RAMPS.h
#endif
#define MOSFET_B_PIN 45 // HEATER1
//
// Heaters / Fans
//
#if ANY(FET_ORDER_EEF, FET_ORDER_EEB, FET_ORDER_EFB)
#define FAN1_PIN 7
#endif
#define FAN2_PIN 44
#define FAN_PIN 9 // FAN0
#define FAN1_PIN 7 // FAN1
#define FAN2_PIN 44 // FAN2
#ifndef E0_AUTO_FAN_PIN
#define E0_AUTO_FAN_PIN 44 // Used in Anycubic Kossel example config
#endif
#if ANY(ANYCUBIC_LCD_I3MEGA, KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_MEGA_X, KNUTWURST_4MAXP2, KNUTWURST_CHIRON)
#define CONTROLLER_FAN_PIN 7
#define E0_AUTO_FAN_PIN FAN2_PIN
#endif
//
// AnyCubic standard pin mappings
// AnyCubic pin mappings
//
// Define the appropriate mapping option in Configuration.h:
// - TRIGORILLA_MAPPING_CHIRON
// - TRIGORILLA_MAPPING_I3MEGA
//
// On most printers, endstops are NOT all wired to the appropriate pins on the Trigorilla board.
// For instance, on a Chiron, Y axis goes to an aux connector.
// There are also other things that have been wired in creative ways.
// To enable PIN definitions for a specific printer model, #define the appropriate symbol after
// MOTHERBOARD in Configuration.h
//
// Limit Switches
//
//#define ANYCUBIC_4_MAX_PRO_ENDSTOPS
#if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS)
#define X_MAX_PIN 43
#define Y_STOP_PIN 19
#elif ANY(ANYCUBIC_LCD_CHIRON, ANYCUBIC_LCD_I3MEGA, KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_MEGA_X, KNUTWURST_4MAXP2, KNUTWURST_CHIRON) // PATCH: Knutwurst
#define Y_STOP_PIN 42
#define Z2_MIN_PIN 43
#define CONTROLLER_FAN_PIN FAN1_PIN // PATCH: knutwurst
#elif ANY(TRIGORILLA_MAPPING_CHIRON, TRIGORILLA_MAPPING_I3MEGA, KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_MEGA_X, KNUTWURST_4MAXP2, KNUTWURST_CHIRON) // PATCH: Knutwurst
// Chiron uses AUX header for Y and Z endstops
#define Y_STOP_PIN 42 // AUX
#define Z_STOP_PIN 43 // AUX
#define Z2_MIN_PIN 18 // Z-
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 2
#endif
#ifndef FIL_RUNOUT_PIN
#if EITHER(ANYCUBIC_LCD_CHIRON, KNUTWURST_CHIRON) // PATCH: Knutwurst
#define CONTROLLER_FAN_PIN FAN1_PIN
#if ENABLED(POWER_LOSS_RECOVERY)
#define OUTAGETEST_PIN 79
#define OUTAGECON_PIN 58
#endif
#if EITHER(TRIGORILLA_MAPPING_CHIRON, KNUTWURST_CHIRON) // PATCH: Knutwurst
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 33
#else
#endif
#define HEATER_BED_PIN MOSFET_B_PIN // HEATER1
#else
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 19
#endif
#endif
#if EITHER(TRIGORILLA_MAPPING_CHIRON, SWAP_Z_MOTORS)
// Chiron and some Anycubic i3 MEGAs swap Z steppers
#define Z_STEP_PIN 36
#define Z_DIR_PIN 34
#define Z_ENABLE_PIN 30
#define Z_CS_PIN 44
#define Z2_STEP_PIN 46
#define Z2_DIR_PIN 48
#define Z2_ENABLE_PIN 62
#define Z2_CS_PIN 40
#endif
#endif
#if EITHER(ANYCUBIC_LCD_CHIRON, ANYCUBIC_LCD_I3MEGA)
#define BEEPER_PIN 31
#define SD_DETECT_PIN 49
#endif
#if HAS_TMC_UART
#ifndef X_SERIAL_TX_PIN
#define X_SERIAL_TX_PIN SERVO1_PIN
#endif
#ifndef Y_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN SERVO0_PIN
#endif
#ifndef Z_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN SERVO3_PIN
#endif
#ifndef E0_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN SERVO2_PIN
#endif
#endif
#include "pins_RAMPS.h"
//