Merge upstream changes from Marlin 2.1.2

2022-12-19 15:23:45 +01:00
parent fe9ea826a5
commit 67c7ce7b79
427 changed files with 10732 additions and 7834 deletions
--- a/buildroot/tests/BIGTREE_SKR_PRO
+++ b/buildroot/tests/BIGTREE_SKR_PRO
@@ -27,7 +27,7 @@ opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
        SPINDLE_LASER_PWM_PIN HEATER_1_PIN SPINDLE_LASER_ENA_PIN HEATER_2_PIN \
        TEMP_SENSOR_COOLER 1000 TEMP_COOLER_PIN PD13
 opt_enable LASER_FEATURE LASER_SAFETY_TIMEOUT_MS REPRAP_DISCOUNT_SMART_CONTROLLER
-exec_test $1 $2 "BigTreeTech SKR Pro | Laser (Percent) | Cooling | LCD" "$3"
+exec_test $1 $2 "BigTreeTech SKR Pro | HD44780 | Laser (Percent) | Cooling | LCD" "$3"

 # clean up
 restore_configs
--- a/buildroot/tests/SAMD51_grandcentral_m4
+++ b/buildroot/tests/SAMD51_grandcentral_m4
@@ -21,12 +21,13 @@ opt_enable ENDSTOP_INTERRUPTS_FEATURE S_CURVE_ACCELERATION BLTOUCH Z_MIN_PROBE_R
           FILAMENT_RUNOUT_SENSOR G26_MESH_VALIDATION MESH_EDIT_GFX_OVERLAY Z_SAFE_HOMING \
           EEPROM_SETTINGS NOZZLE_PARK_FEATURE SDSUPPORT SD_CHECK_AND_RETRY \
           REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER Z_STEPPER_AUTO_ALIGN ADAPTIVE_STEP_SMOOTHING \
-           STATUS_MESSAGE_SCROLLING LCD_SET_PROGRESS_MANUALLY SHOW_REMAINING_TIME USE_M73_REMAINING_TIME \
-           LONG_FILENAME_HOST_SUPPORT SCROLL_LONG_FILENAMES BABYSTEPPING DOUBLECLICK_FOR_Z_BABYSTEPPING \
+           STATUS_MESSAGE_SCROLLING SET_PROGRESS_MANUALLY SHOW_REMAINING_TIME SET_REMAINING_TIME \
+           LONG_FILENAME_HOST_SUPPORT CUSTOM_FIRMWARE_UPLOAD M20_TIMESTAMP_SUPPORT \
+           SCROLL_LONG_FILENAMES BABYSTEPPING DOUBLECLICK_FOR_Z_BABYSTEPPING \
           MOVE_Z_WHEN_IDLE BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
           LIN_ADVANCE ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE MONITOR_DRIVER_STATUS SENSORLESS_HOMING \
           SQUARE_WAVE_STEPPING TMC_DEBUG EXPERIMENTAL_SCURVE
-exec_test $1 $2 "Build Grand Central M4 Default Configuration" "$3"
+exec_test $1 $2 "Grand Central M4 with assorted features" "$3"

 # clean up
 restore_configs
--- a/buildroot/tests/STM32F103RE_creality
+++ b/buildroot/tests/STM32F103RE_creality
@@ -20,7 +20,7 @@ exec_test $1 $2 "Ender 3 v2 with JyersUI" "$3"

 use_example_configs "Creality/Ender-3 S1/STM32F1"
 opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CONFIGURATION_EMBEDDING CANCEL_OBJECTS FWRETRACT
-opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU LCD_SET_PROGRESS_MANUALLY STATUS_MESSAGE_SCROLLING \
+opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT STATUS_MESSAGE_SCROLLING \
           SOUND_MENU_ITEM PRINTCOUNTER NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_SENSOR \
           BLTOUCH Z_SAFE_HOMING AUTO_BED_LEVELING_UBL MESH_EDIT_MENU \
           LIMITED_MAX_FR_EDITING LIMITED_MAX_ACCEL_EDITING LIMITED_JERK_EDITING BAUD_RATE_GCODE
--- a/buildroot/tests/mega2560
+++ b/buildroot/tests/mega2560
@@ -30,8 +30,8 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
           REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
           SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \
           EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \
-           MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
-           LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
+           MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE ADVANCE_K_EXTRA QUICK_HOME \
+           SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
           ENCODER_NOISE_FILTER BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
 exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3"

@@ -42,7 +42,7 @@ use_example_configs AnimationExample
 opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE jp_kana DEFAULT_EJERK 10 \
        EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
-           LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES \
+           SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES \
           SDSUPPORT LONG_FILENAME_WRITE_SUPPORT SDCARD_SORT_ALPHA NO_SD_AUTOSTART USB_FLASH_DRIVE_SUPPORT CANCEL_OBJECTS \
           Z_PROBE_SLED AUTO_BED_LEVELING_UBL UBL_HILBERT_CURVE RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT \
           EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN \
@@ -80,9 +80,9 @@ opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO MIXING_STEPPERS 5 LCD_LANGUAGE ru \
        FIL_RUNOUT2_PIN 16 FIL_RUNOUT3_PIN 17 FIL_RUNOUT4_PIN 4 FIL_RUNOUT5_PIN 5
 opt_enable MIXING_EXTRUDER GRADIENT_MIX GRADIENT_VTOOL CR10_STOCKDISPLAY \
           USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z \
-           FILAMENT_RUNOUT_SENSOR ADVANCED_PAUSE_FEATURE NOZZLE_PARK_FEATURE
+           FILAMENT_RUNOUT_SENSOR ADVANCED_PAUSE_FEATURE NOZZLE_PARK_FEATURE INPUT_SHAPING_X INPUT_SHAPING_Y
 opt_disable DISABLE_INACTIVE_EXTRUDER
-exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
+exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Input Shaping | Greek" "$3"

 #
 # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
@@ -177,52 +177,52 @@ exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
 #opt_enable LCM1602
 #exec_test $1 $2 "Stuff" "$3"

-#
-# Test Laser features with 12864 LCD
-#
-restore_configs
-opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 SERIAL_PORT_2 2 \
-        DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
-        DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
-        DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
-        MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
-        AXIS_RELATIVE_MODES '{ false, false, false }'
-opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT MEATPACK_ON_SERIAL_PORT_1 \
-           LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_SYNCHRONOUS_M106_M107
-exec_test $1 $2 "MEGA2560 RAMPS | Laser Options | 12864 | Meatpack | Fan Sync | SERIAL_PORT_2 " "$3"
+# #
+# # Test Laser features with 12864 LCD
+# #
+# restore_configs
+# opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 SERIAL_PORT_2 2 \
+#         DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
+#         DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
+#         DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
+#         MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
+#         AXIS_RELATIVE_MODES '{ false, false, false }'
+# opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT MEATPACK_ON_SERIAL_PORT_1 \
+#            LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_SYNCHRONOUS_M106_M107
+# exec_test $1 $2 "MEGA2560 RAMPS | Laser Options | 12864 | Meatpack | Fan Sync | SERIAL_PORT_2 " "$3"

-#
-# Test Laser features with 44780 LCD
-#
-restore_configs
-opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 \
-        DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
-        DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
-        DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
-        MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
-        AXIS_RELATIVE_MODES '{ false, false, false }'
-opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT PRINTCOUNTER I2C_AMMETER \
-           LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN
-exec_test $1 $2 "MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Laser Safety Timeout | Flowmeter | 44780 LCD " "$3"
+# #
+# # Test Laser features with 44780 LCD
+# #
+# restore_configs
+# opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 \
+#         DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
+#         DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
+#         DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
+#         MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
+#         AXIS_RELATIVE_MODES '{ false, false, false }'
+# opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT PRINTCOUNTER I2C_AMMETER \
+#            LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN
+# exec_test $1 $2 "MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Laser Safety Timeout | Flowmeter | 44780 LCD " "$3"

-#
-# Test redundant temperature sensors + MAX TC + Backlight Timeout
-#
-restore_configs
-opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 1 \
-        TEMP_SENSOR_0 -2 TEMP_SENSOR_REDUNDANT -2 \
-        TEMP_SENSOR_REDUNDANT_SOURCE E1 TEMP_SENSOR_REDUNDANT_TARGET E0 \
-        TEMP_0_CS_PIN 11 TEMP_1_CS_PIN 12 \
-        LCD_BACKLIGHT_TIMEOUT 30
-opt_enable MPCTEMP MINIPANEL
-opt_disable PIDTEMP
-exec_test $1 $2 "MEGA2560 RAMPS | Redundant temperature sensor | 2x MAX6675 | BL Timeout" "$3"
+# #
+# # Test redundant temperature sensors + MAX TC + Backlight Timeout
+# #
+# restore_configs
+# opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 1 \
+#         TEMP_SENSOR_0 -2 TEMP_SENSOR_REDUNDANT -2 \
+#         TEMP_SENSOR_REDUNDANT_SOURCE E1 TEMP_SENSOR_REDUNDANT_TARGET E0 \
+#         TEMP_0_CS_PIN 11 TEMP_1_CS_PIN 12 \
+#         LCD_BACKLIGHT_TIMEOUT_MINS 2
+# opt_enable MPCTEMP MINIPANEL
+# opt_disable PIDTEMP
+# exec_test $1 $2 "MEGA2560 RAMPS | Redundant temperature sensor | 2x MAX6675 | BL Timeout" "$3"

-#
-# Polargraph Config
-#
-use_example_configs Polargraph
-exec_test $1 $2 "RUMBA | POLARGRAPH | RRD LCD" "$3"
+# #
+# # Polargraph Config
+# #
+# use_example_configs Polargraph
+# exec_test $1 $2 "RUMBA | POLARGRAPH | RRD LCD" "$3"

 #
 # Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
@@ -239,8 +239,8 @@ exec_test $1 $2 "RUMBA | POLARGRAPH | RRD LCD" "$3"
 #
 # Test a basic DUAL_X_CARRIAGE configuration
 #
-use_example_configs Formbot/T_Rex_3
-exec_test $1 $2 "Formbot/T_Rex_3 example configuration." "$3"
+# use_example_configs Formbot/T_Rex_3
+# exec_test $1 $2 "Formbot/T_Rex_3 example configuration." "$3"

 #
 # BQ Hephestos 2
@@ -260,5 +260,20 @@ exec_test $1 $2 "Formbot/T_Rex_3 example configuration." "$3"
 #use_example_configs tvrrug/Round2
 #exec_test $1 $2 "Stuff" "$3"

+#
+# Test progress display rotation
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMPS_14_EFB
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
+           SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT SET_REMAINING_TIME SET_INTERACTION_TIME M73_REPORT \
+           SHOW_PROGRESS_PERCENT SHOW_ELAPSED_TIME SHOW_REMAINING_TIME SHOW_INTERACTION_TIME PRINT_PROGRESS_SHOW_DECIMALS
+exec_test $1 $2 "MEGA2560 RAMPS | 128x64 | progress rotation" "$3"
+opt_enable LIGHTWEIGHT_UI
+exec_test $1 $2 "MEGA2560 RAMPS | 128x64 LIGHTWEIGHT_UI | progress rotation" "$3"
+opt_disable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER
+exec_test $1 $2 "MEGA2560 RAMPS | HD44780 | progress rotation" "$3"
+
 # clean up
 restore_configs
--- a/buildroot/tests/mks_robin_nano35
+++ b/buildroot/tests/mks_robin_nano35
@@ -1,68 +0,0 @@
-#!/usr/bin/env bash
-#
-# Build tests for MKS Robin nano
-# (STM32F1 genericSTM32F103VE)
-#
-
-# exit on first failure
-set -e
-
-#
-# MKS Robin nano v1.2 Emulated DOGM FSMC
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
-exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
-
-#
-# MKS Robin nano v2 Emulated DOGM SPI
-# (Robin nano v2 has no FSMC interface)
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
-opt_disable TFT_INTERFACE_FSMC
-opt_enable TFT_INTERFACE_SPI MKS_WIFI_MODULE
-opt_add MKS_TEST
-exec_test $1 $2 "MKS Robin nano v2 Emulated DOGM SPI, MKS_WIFI_MODULE" "$3"
-
-#
-# MKS Robin nano v1.2 LVGL FSMC
-#
-# use_example_configs Mks/Robin
-# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
-# opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
-# opt_enable TFT_LVGL_UI TFT_RES_480x320
-# exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
-
-#
-# MKS Robin nano v2 LVGL SPI
-# (Robin nano v2 has no FSMC interface)
-#
-# use_example_configs Mks/Robin
-# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
-# opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
-# opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
-# exec_test $1 $2 "MKS Robin nano v2 LVGL SPI" "$3"
-
-#
-# MKS Robin nano v2 New Color UI 480x320 SPI
-# (Robin nano v2 has no FSMC interface)
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
-opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
-opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
-exec_test $1 $2 "MKS Robin nano v2 with New Color UI 480x320 SPI" "$3"
-
-#
-# MKS Robin nano v2 LVGL SPI + TMC
-# (Robin nano v2 has no FSMC interface)
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
-opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
-opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
-exec_test $1 $2 "MKS Robin nano v2 LVGL SPI + TMC" "$3"
-
-# cleanup
-restore_configs
--- a/buildroot/tests/mks_robin_nano35_maple
+++ b/buildroot/tests/mks_robin_nano35_maple
@@ -1,69 +0,0 @@
-#!/usr/bin/env bash
-#
-# Build tests for MKS Robin nano with LibMaple STM32F1 HAL
-# (STM32F1 genericSTM32F103VE)
-#
-
-# exit on first failure
-set -e
-
-#
-# MKS Robin nano v1.2 Emulated DOGM FSMC
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
-exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
-
-#
-# MKS Robin v2 nano Emulated DOGM SPI
-# (Robin v2 nano has no FSMC interface)
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
-opt_disable TFT_INTERFACE_FSMC
-opt_enable TFT_INTERFACE_SPI
-exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
-
-#
-# MKS Robin v2 nano LVGL SPI
-# (Robin v2 nano has no FSMC interface)
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
-opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 SERIAL_PORT_2
-opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 MKS_WIFI_MODULE
-opt_add MKS_TEST
-exec_test $1 $2 "MKS Robin v2 nano LVGL SPI w/ WiFi" "$3"
-
-#
-# MKS Robin v2 nano New Color UI 480x320 SPI
-# (Robin v2 nano has no FSMC interface)
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
-opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
-opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
-opt_enable BINARY_FILE_TRANSFER
-exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI + BINARY_FILE_TRANSFER" "$3"
-
-#
-# MKS Robin v2 nano LVGL SPI + TMC
-# (Robin v2 nano has no FSMC interface)
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
-opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
-opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
-exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
-
-#
-# MKS Robin v2 nano New Color UI 480x320 SPI Without Touch Screen
-#
-use_example_configs Mks/Robin
-opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
-opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240 TOUCH_SCREEN
-opt_enable TFT_INTERFACE_SPI TFT_RES_480x320 TFT_COLOR_UI
-exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI without TOUCH_SCREEN" "$3"
-
-# cleanup
-restore_configs
--- a/buildroot/tests/rambo
+++ b/buildroot/tests/rambo
@@ -23,7 +23,7 @@ opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_P
           EEPROM_SETTINGS SDSUPPORT SD_REPRINT_LAST_SELECTED_FILE BINARY_FILE_TRANSFER \
           BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \
           NEOPIXEL_LED NEOPIXEL_PIN CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \
-           PID_PARAMS_PER_HOTEND PID_AUTOTUNE_MENU PID_EDIT_MENU LCD_SHOW_E_TOTAL \
+           PID_PARAMS_PER_HOTEND PID_AUTOTUNE_MENU PID_EDIT_MENU PID_EXTRUSION_SCALING LCD_SHOW_E_TOTAL \
           PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LCD_BED_TRAMMING BED_TRAMMING_INCLUDE_CENTER \
           NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \
           ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \
@@ -32,9 +32,9 @@ opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_P
           SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
           BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
           FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
-           PSU_CONTROL PS_OFF_CONFIRM PS_OFF_SOUND POWER_OFF_WAIT_FOR_COOLDOWN \
+           PSU_CONTROL LED_POWEROFF_TIMEOUT PS_OFF_CONFIRM PS_OFF_SOUND POWER_OFF_WAIT_FOR_COOLDOWN \
           POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE POWER_LOSS_RECOVER_ZHOME POWER_LOSS_ZHOME_POS \
-           SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
+           SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE ADVANCE_K_EXTRA \
           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
 opt_add DEBUG_POWER_LOSS_RECOVERY
 exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3"
@@ -93,7 +93,7 @@ opt_set MOTHERBOARD BOARD_MINIRAMBO \
 opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
          SDSUPPORT PCA9632 SOUND_MENU_ITEM GCODE_REPEAT_MARKERS \
          AUTO_BED_LEVELING_LINEAR PROBE_MANUALLY LCD_BED_LEVELING \
-          LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
+          LIN_ADVANCE ADVANCE_K_EXTRA \
          INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT EXPERIMENTAL_I2CBUS M100_FREE_MEMORY_WATCHER \
          NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \
          ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \