wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

update code base to Marlin 2.0.9.2

Browse Source
This commit is contained in:
Stefan Kalscheuer
2021-10-03 18:57:12 +02:00
parent b9d7ba838e
commit 7077da3591
2617 changed files with 332093 additions and 103438 deletions
Download Patch File Download Diff File Expand all files Collapse all files

343
Marlin/src/HAL/DUE/DebugMonitor.cpp
View File

@@ -1,343 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../core/macros.h"
#include "../../core/serial.h"
#include "../shared/backtrace/unwinder.h"
#include "../shared/backtrace/unwmemaccess.h"
#include <stdarg.h>
// Debug monitor that dumps to the Programming port all status when
// an exception or WDT timeout happens - And then resets the board
// All the Monitor routines must run with interrupts disabled and
// under an ISR execution context. That is why we cannot reuse the
// Serial interrupt routines or any C runtime, as we don't know the
// state we are when running them
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
// (re)initialize UART0 as a monitor output to 250000,n,8,1
static void TXBegin() {
// Disable UART interrupt in NVIC
NVIC_DisableIRQ( UART_IRQn );
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
__DSB();
__ISB();
// Disable clock
pmc_disable_periph_clk( ID_UART );
// Configure PMC
pmc_enable_periph_clk( ID_UART );
// Disable PDC channel
UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
// Reset and disable receiver and transmitter
UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
// Configure mode: 8bit, No parity, 1 bit stop
UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
// Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
// Enable receiver and transmitter
UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
}
// Send character through UART with no interrupts
static void TX(char c) {
while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
UART->UART_THR = c;
}
// Send String through UART
static void TX(const char* s) {
while (*s) TX(*s++);
}
static void TXDigit(uint32_t d) {
if (d < 10) TX((char)(d+'0'));
else if (d < 16) TX((char)(d+'A'-10));
else TX('?');
}
// Send Hex number thru UART
static void TXHex(uint32_t v) {
TX("0x");
for (uint8_t i = 0; i < 8; i++, v <<= 4)
TXDigit((v >> 28) & 0xF);
}
// Send Decimal number thru UART
static void TXDec(uint32_t v) {
if (!v) {
TX('0');
return;
}
char nbrs[14];
char *p = &nbrs[0];
while (v != 0) {
*p++ = '0' + (v % 10);
v /= 10;
}
do {
p--;
TX(*p);
} while (p != &nbrs[0]);
}
// Dump a backtrace entry
static bool UnwReportOut(void* ctx, const UnwReport* bte) {
int* p = (int*)ctx;
(*p)++;
TX('#'); TXDec(*p); TX(" : ");
TX(bte->name?bte->name:"unknown"); TX('@'); TXHex(bte->function);
TX('+'); TXDec(bte->address - bte->function);
TX(" PC:");TXHex(bte->address); TX('\n');
return true;
}
#ifdef UNW_DEBUG
void UnwPrintf(const char* format, ...) {
char dest[256];
va_list argptr;
va_start(argptr, format);
vsprintf(dest, format, argptr);
va_end(argptr);
TX(&dest[0]);
}
#endif
/* Table of function pointers for passing to the unwinder */
static const UnwindCallbacks UnwCallbacks = {
UnwReportOut,
UnwReadW,
UnwReadH,
UnwReadB
#ifdef UNW_DEBUG
, UnwPrintf
#endif
};
/**
* HardFaultHandler_C:
* This is called from the HardFault_HandlerAsm with a pointer the Fault stack
* as the parameter. We can then read the values from the stack and place them
* into local variables for ease of reading.
* We then read the various Fault Status and Address Registers to help decode
* cause of the fault.
* The function ends with a BKPT instruction to force control back into the debugger
*/
extern "C"
void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause) {
static const char* causestr[] = {
"NMI","Hard","Mem","Bus","Usage","Debug","WDT","RSTC"
};
UnwindFrame btf;
// Dump report to the Programming port (interrupts are DISABLED)
TXBegin();
TX("\n\n## Software Fault detected ##\n");
TX("Cause: "); TX(causestr[cause]); TX('\n');
TX("R0 : "); TXHex(((unsigned long)sp[0])); TX('\n');
TX("R1 : "); TXHex(((unsigned long)sp[1])); TX('\n');
TX("R2 : "); TXHex(((unsigned long)sp[2])); TX('\n');
TX("R3 : "); TXHex(((unsigned long)sp[3])); TX('\n');
TX("R12 : "); TXHex(((unsigned long)sp[4])); TX('\n');
TX("LR : "); TXHex(((unsigned long)sp[5])); TX('\n');
TX("PC : "); TXHex(((unsigned long)sp[6])); TX('\n');
TX("PSR : "); TXHex(((unsigned long)sp[7])); TX('\n');
// Configurable Fault Status Register
// Consists of MMSR, BFSR and UFSR
TX("CFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED28)))); TX('\n');
// Hard Fault Status Register
TX("HFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED2C)))); TX('\n');
// Debug Fault Status Register
TX("DFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED30)))); TX('\n');
// Auxiliary Fault Status Register
TX("AFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED3C)))); TX('\n');
// Read the Fault Address Registers. These may not contain valid values.
// Check BFARVALID/MMARVALID to see if they are valid values
// MemManage Fault Address Register
TX("MMAR : "); TXHex((*((volatile unsigned long *)(0xE000ED34)))); TX('\n');
// Bus Fault Address Register
TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
TX("ExcLR: "); TXHex(lr); TX('\n');
TX("ExcSP: "); TXHex((unsigned long)sp); TX('\n');
btf.sp = ((unsigned long)sp) + 8*4; // The original stack pointer
btf.fp = btf.sp;
btf.lr = ((unsigned long)sp[5]);
btf.pc = ((unsigned long)sp[6]) | 1; // Force Thumb, as CORTEX only support it
// Perform a backtrace
TX("\nBacktrace:\n\n");
int ctr = 0;
UnwindStart(&btf, &UnwCallbacks, &ctr);
// Disable all NVIC interrupts
NVIC->ICER[0] = 0xFFFFFFFF;
NVIC->ICER[1] = 0xFFFFFFFF;
// Relocate VTOR table to default position
SCB->VTOR = 0;
// Disable USB
otg_disable();
// Restart watchdog
WDT_Restart(WDT);
// Reset controller
NVIC_SystemReset();
for (;;) WDT_Restart(WDT);
}
__attribute__((naked)) void NMI_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#0")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void HardFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#1")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void MemManage_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#2")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void BusFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#3")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void UsageFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#4")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void DebugMon_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#5")
A("b HardFault_HandlerC")
);
}
/* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
__attribute__((naked)) void WDT_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#6")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void RSTC_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#7")
A("b HardFault_HandlerC")
);
}
#endif // ARDUINO_ARCH_SAM

26
Marlin/src/HAL/DUE/HAL.cpp Executable file → Normal file
View File

@@ -14,13 +14,12 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Description: HAL for Arduino Due and compatible (SAM3X8E)
*
* For ARDUINO_ARCH_SAM
* HAL for Arduino Due and compatible (SAM3X8E)
*/
#ifdef ARDUINO_ARCH_SAM
@@ -41,6 +40,8 @@ uint16_t HAL_adc_result;
// Public functions
// ------------------------
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
// HAL initialization task
void HAL_init() {
// Initialize the USB stack
@@ -48,6 +49,7 @@ void HAL_init() {
OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up
#endif
usb_task_init();
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
}
// HAL idle task
@@ -75,6 +77,8 @@ uint8_t HAL_get_reset_source() {
}
}
void HAL_reboot() { rstc_start_software_reset(RSTC); }
void _delay_ms(const int delay_ms) {
// Todo: port for Due?
delay(delay_ms);
@@ -103,4 +107,18 @@ uint16_t HAL_adc_get_result() {
return HAL_adc_result;
}
// Forward the default serial ports
#if USING_HW_SERIAL0
DefaultSerial1 MSerial0(false, Serial);
#endif
#if USING_HW_SERIAL1
DefaultSerial2 MSerial1(false, Serial1);
#endif
#if USING_HW_SERIAL2
DefaultSerial3 MSerial2(false, Serial2);
#endif
#if USING_HW_SERIAL3
DefaultSerial4 MSerial3(false, Serial3);
#endif
#endif // ARDUINO_ARCH_SAM

131
Marlin/src/HAL/DUE/HAL.h Executable file → Normal file
View File

@@ -16,81 +16,81 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Description: HAL for Arduino Due and compatible (SAM3X8E)
*
* For ARDUINO_ARCH_SAM
* HAL for Arduino Due and compatible (SAM3X8E)
*/
#define CPU_32_BIT
#include "../shared/Marduino.h"
#include "../shared/eeprom_if.h"
#include "../shared/math_32bit.h"
#include "../shared/HAL_SPI.h"
#include "fastio.h"
#include "watchdog.h"
#include "timers.h"
#include <stdint.h>
// Define MYSERIAL0/1 before MarlinSerial includes!
#include "../../core/serial_hook.h"
typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
extern DefaultSerial1 MSerial0;
extern DefaultSerial2 MSerial1;
extern DefaultSerial3 MSerial2;
extern DefaultSerial4 MSerial3;
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL0 customizedSerial1
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial
#elif SERIAL_PORT == 1
#define MYSERIAL0 Serial1
#elif SERIAL_PORT == 2
#define MYSERIAL0 Serial2
#elif SERIAL_PORT == 3
#define MYSERIAL0 Serial3
#define MYSERIAL1 customizedSerial1
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#else
#error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
#error "The required SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
#elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL1 customizedSerial2
#elif SERIAL_PORT_2 == 0
#define MYSERIAL1 Serial
#elif SERIAL_PORT_2 == 1
#define MYSERIAL1 Serial1
#elif SERIAL_PORT_2 == 2
#define MYSERIAL1 Serial2
#elif SERIAL_PORT_2 == 3
#define MYSERIAL1 Serial3
#if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL2 customizedSerial2
#elif WITHIN(SERIAL_PORT_2, 0, 3)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
#error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
#endif
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL_PORT
#if DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL internalDgusSerial
#elif DGUS_SERIAL_PORT == 0
#define DGUS_SERIAL Serial
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL Serial1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL Serial2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL Serial3
#ifdef SERIAL_PORT_3
#if SERIAL_PORT_3 == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL3 customizedSerial3
#elif WITHIN(SERIAL_PORT_3, 0, 3)
#define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
#else
#error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
#endif
#endif
#ifdef MMU2_SERIAL_PORT
#if WITHIN(MMU2_SERIAL_PORT, 0, 3)
#define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
#else
#error "MMU2_SERIAL_PORT must be from 0 to 3."
#endif
#endif
#ifdef LCD_SERIAL_PORT
#if WITHIN(LCD_SERIAL_PORT, 0, 3)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
#error "LCD_SERIAL_PORT must be from 0 to 3."
#endif
#endif
@@ -100,16 +100,6 @@
// On AVR this is in math.h?
#define square(x) ((x)*(x))
#ifndef strncpy_P
#define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
#endif
// Fix bug in pgm_read_ptr
#undef pgm_read_ptr
#define pgm_read_ptr(addr) (*((void**)(addr)))
#undef pgm_read_word
#define pgm_read_word(addr) (*((uint16_t*)(addr)))
typedef int8_t pin_t;
#define SHARED_SERVOS HAS_SERVOS
@@ -130,13 +120,7 @@ void sei(); // Enable interrupts
void HAL_clear_reset_source(); // clear reset reason
uint8_t HAL_get_reset_source(); // get reset reason
//
// EEPROM
//
void eeprom_write_byte(uint8_t *pos, unsigned char value);
uint8_t eeprom_read_byte(uint8_t *pos);
void eeprom_read_block (void *__dst, const void *__src, size_t __n);
void eeprom_update_block (const void *__src, void *__dst, size_t __n);
void HAL_reboot();
//
// ADC
@@ -144,15 +128,16 @@ void eeprom_update_block (const void *__src, void *__dst, size_t __n);
extern uint16_t HAL_adc_result; // result of last ADC conversion
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
#define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
#endif
#define HAL_ANALOG_SELECT(ch)
inline void HAL_adc_init() {}//todo
#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch)
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
@@ -183,10 +168,16 @@ void HAL_init();
//
void _delay_ms(const int delay);
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
#if GCC_VERSION <= 50000
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
int freeMemory();
#pragma GCC diagnostic pop
#if GCC_VERSION <= 50000
#pragma GCC diagnostic pop
#endif
#ifdef __cplusplus
extern "C" {

91
Marlin/src/HAL/DUE/HAL_MinSerial.cpp Normal file
View File

@@ -0,0 +1,91 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include <stdarg.h>
static void TXBegin() {
// Disable UART interrupt in NVIC
NVIC_DisableIRQ( UART_IRQn );
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
__DSB();
__ISB();
// Disable clock
pmc_disable_periph_clk( ID_UART );
// Configure PMC
pmc_enable_periph_clk( ID_UART );
// Disable PDC channel
UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
// Reset and disable receiver and transmitter
UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
// Configure mode: 8bit, No parity, 1 bit stop
UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
// Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
// Enable receiver and transmitter
UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
}
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
static void TX(char c) {
while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
UART->UART_THR = c;
}
void install_min_serial() {
HAL_min_serial_init = &TXBegin;
HAL_min_serial_out = &TX;
}
#if DISABLED(DYNAMIC_VECTORTABLE)
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // ARDUINO_ARCH_SAM

151
Marlin/src/HAL/DUE/HAL_SPI.cpp Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
@@ -30,7 +30,7 @@
*/
/**
* Description: HAL for Arduino Due and compatible (SAM3X8E)
* HAL for Arduino Due and compatible (SAM3X8E)
*
* For ARDUINO_ARCH_SAM
*/
@@ -56,8 +56,8 @@
#pragma GCC optimize (3)
typedef uint8_t (*pfnSpiTransfer)(uint8_t b);
typedef void (*pfnSpiRxBlock)(uint8_t* buf, uint32_t nbyte);
typedef void (*pfnSpiTxBlock)(const uint8_t* buf, uint32_t nbyte);
typedef void (*pfnSpiRxBlock)(uint8_t *buf, uint32_t nbyte);
typedef void (*pfnSpiTxBlock)(const uint8_t *buf, uint32_t nbyte);
/* ---------------- Macros to be able to access definitions from asm */
#define _PORT(IO) DIO ## IO ## _WPORT
@@ -69,10 +69,10 @@
// run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
static uint8_t spiTransferTx0(uint8_t bout) { // using Mode 0
uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30; /* SODR of port */
uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30; /* SODR of port */
uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
uint32_t idx = 0;
/* Negate bout, as the assembler requires a negated value */
@@ -154,9 +154,9 @@
static uint8_t spiTransferRx0(uint8_t) { // using Mode 0
uint32_t bin = 0;
uint32_t work = 0;
uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN)); /* PDSR of port in bitband area */
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN)); /* PDSR of port in bitband area */
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
/* The software SPI routine */
__asm__ __volatile__(
@@ -225,36 +225,36 @@
static uint8_t spiTransfer1(uint8_t b) { // using Mode 0
int bits = 8;
do {
WRITE(MOSI_PIN, b & 0x80);
WRITE(SD_MOSI_PIN, b & 0x80);
b <<= 1; // little setup time
WRITE(SCK_PIN, HIGH);
WRITE(SD_SCK_PIN, HIGH);
DELAY_NS(125); // 10 cycles @ 84mhz
b |= (READ(MISO_PIN) != 0);
b |= (READ(SD_MISO_PIN) != 0);
WRITE(SCK_PIN, LOW);
WRITE(SD_SCK_PIN, LOW);
DELAY_NS(125); // 10 cycles @ 84mhz
} while (--bits);
return b;
}
// all the others
static uint32_t spiDelayCyclesX4 = (F_CPU) / 1000000; // 4µs => 125khz
static uint16_t spiDelayNS = 4000; // 4000ns => 125khz
static uint8_t spiTransferX(uint8_t b) { // using Mode 0
int bits = 8;
do {
WRITE(MOSI_PIN, b & 0x80);
WRITE(SD_MOSI_PIN, b & 0x80);
b <<= 1; // little setup time
WRITE(SCK_PIN, HIGH);
__delay_4cycles(spiDelayCyclesX4);
WRITE(SD_SCK_PIN, HIGH);
DELAY_NS(spiDelayNS);
b |= (READ(MISO_PIN) != 0);
b |= (READ(SD_MISO_PIN) != 0);
WRITE(SCK_PIN, LOW);
__delay_4cycles(spiDelayCyclesX4);
WRITE(SD_SCK_PIN, LOW);
DELAY_NS(spiDelayNS);
} while (--bits);
return b;
}
@@ -270,11 +270,11 @@
static pfnSpiTransfer spiTransferTx = (pfnSpiTransfer)spiTransferX;
// Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) {
uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30; /* SODR of port */
uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
static void spiTxBlock0(const uint8_t *ptr, uint32_t todo) {
uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30; /* SODR of port */
uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
uint32_t work = 0;
uint32_t txval = 0;
@@ -349,12 +349,12 @@
);
}
static void spiRxBlock0(uint8_t* ptr, uint32_t todo) {
static void spiRxBlock0(uint8_t *ptr, uint32_t todo) {
uint32_t bin = 0;
uint32_t work = 0;
uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN)); /* PDSR of port in bitband area */
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN)); /* PDSR of port in bitband area */
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
/* The software SPI routine */
__asm__ __volatile__(
@@ -425,48 +425,48 @@
);
}
static void spiTxBlockX(const uint8_t* buf, uint32_t todo) {
static void spiTxBlockX(const uint8_t *buf, uint32_t todo) {
do {
(void)spiTransferTx(*buf++);
} while (--todo);
}
static void spiRxBlockX(uint8_t* buf, uint32_t todo) {
static void spiRxBlockX(uint8_t *buf, uint32_t todo) {
do {
*buf++ = spiTransferRx(0xFF);
} while (--todo);
}
// Pointers to generic functions for block tranfers
// Pointers to generic functions for block transfers
static pfnSpiTxBlock spiTxBlock = (pfnSpiTxBlock)spiTxBlockX;
static pfnSpiRxBlock spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
#if MB(ALLIGATOR)
#define _SS_WRITE(S) WRITE(SS_PIN, S)
#define _SS_WRITE(S) WRITE(SD_SS_PIN, S)
#else
#define _SS_WRITE(S) NOOP
#endif
void spiBegin() {
SET_OUTPUT(SS_PIN);
SET_OUTPUT(SD_SS_PIN);
_SS_WRITE(HIGH);
SET_OUTPUT(SCK_PIN);
SET_INPUT(MISO_PIN);
SET_OUTPUT(MOSI_PIN);
SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(SD_MOSI_PIN);
}
uint8_t spiRec() {
_SS_WRITE(LOW);
WRITE(MOSI_PIN, HIGH); // Output 1s 1
WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
uint8_t b = spiTransferRx(0xFF);
_SS_WRITE(HIGH);
return b;
}
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
if (nbyte) {
_SS_WRITE(LOW);
WRITE(MOSI_PIN, HIGH); // Output 1s 1
WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
spiRxBlock(buf, nbyte);
_SS_WRITE(HIGH);
}
@@ -478,7 +478,7 @@
_SS_WRITE(HIGH);
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
_SS_WRITE(LOW);
(void)spiTransferTx(token);
spiTxBlock(buf, 512);
@@ -510,7 +510,7 @@
spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
break;
default:
spiDelayCyclesX4 = ((F_CPU) / 1000000) >> (6 - spiRate);
spiDelayNS = 4000 >> (6 - spiRate); // spiRate of 2 gives the maximum error with current CPU
spiTransferTx = (pfnSpiTransfer)spiTransferX;
spiTransferRx = (pfnSpiTransfer)spiTransferX;
spiTxBlock = (pfnSpiTxBlock)spiTxBlockX;
@@ -519,8 +519,8 @@
}
_SS_WRITE(HIGH);
WRITE(MOSI_PIN, HIGH);
WRITE(SCK_PIN, LOW);
WRITE(SD_MOSI_PIN, HIGH);
WRITE(SD_SCK_PIN, LOW);
}
/** Begin SPI transaction, set clock, bit order, data mode */
@@ -575,38 +575,34 @@
// Configure SPI pins
PIO_Configure(
g_APinDescription[SCK_PIN].pPort,
g_APinDescription[SCK_PIN].ulPinType,
g_APinDescription[SCK_PIN].ulPin,
g_APinDescription[SCK_PIN].ulPinConfiguration);
g_APinDescription[SD_SCK_PIN].pPort,
g_APinDescription[SD_SCK_PIN].ulPinType,
g_APinDescription[SD_SCK_PIN].ulPin,
g_APinDescription[SD_SCK_PIN].ulPinConfiguration);
PIO_Configure(
g_APinDescription[MOSI_PIN].pPort,
g_APinDescription[MOSI_PIN].ulPinType,
g_APinDescription[MOSI_PIN].ulPin,
g_APinDescription[MOSI_PIN].ulPinConfiguration);
g_APinDescription[SD_MOSI_PIN].pPort,
g_APinDescription[SD_MOSI_PIN].ulPinType,
g_APinDescription[SD_MOSI_PIN].ulPin,
g_APinDescription[SD_MOSI_PIN].ulPinConfiguration);
PIO_Configure(
g_APinDescription[MISO_PIN].pPort,
g_APinDescription[MISO_PIN].ulPinType,
g_APinDescription[MISO_PIN].ulPin,
g_APinDescription[MISO_PIN].ulPinConfiguration);
g_APinDescription[SD_MISO_PIN].pPort,
g_APinDescription[SD_MISO_PIN].ulPinType,
g_APinDescription[SD_MISO_PIN].ulPin,
g_APinDescription[SD_MISO_PIN].ulPinConfiguration);
// set master mode, peripheral select, fault detection
SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
SPI_Enable(SPI0);
SET_OUTPUT(DAC0_SYNC);
#if EXTRUDERS > 1
SET_OUTPUT(DAC1_SYNC);
WRITE(DAC1_SYNC, HIGH);
SET_OUTPUT(DAC0_SYNC_PIN);
#if HAS_MULTI_EXTRUDER
OUT_WRITE(DAC1_SYNC_PIN, HIGH);
#endif
SET_OUTPUT(SPI_EEPROM1_CS);
SET_OUTPUT(SPI_EEPROM2_CS);
SET_OUTPUT(SPI_FLASH_CS);
WRITE(DAC0_SYNC, HIGH);
WRITE(SPI_EEPROM1_CS, HIGH);
WRITE(SPI_EEPROM2_CS, HIGH);
WRITE(SPI_FLASH_CS, HIGH);
WRITE(SS_PIN, HIGH);
WRITE(DAC0_SYNC_PIN, HIGH);
OUT_WRITE(SPI_EEPROM1_CS_PIN, HIGH);
OUT_WRITE(SPI_EEPROM2_CS_PIN, HIGH);
OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
WRITE(SD_SS_PIN, HIGH);
OUT_WRITE(SDSS, LOW);
@@ -645,7 +641,7 @@
}
// Read from SPI into buffer
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
if (!nbyte) return;
--nbyte;
for (int i = 0; i < nbyte; i++) {
@@ -668,7 +664,7 @@
//DELAY_US(1U);
}
void spiSend(const uint8_t* buf, size_t nbyte) {
void spiSend(const uint8_t *buf, size_t nbyte) {
if (!nbyte) return;
--nbyte;
for (size_t i = 0; i < nbyte; i++) {
@@ -689,7 +685,7 @@
FLUSH_RX();
}
void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {
void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {
if (!nbyte) return;
--nbyte;
for (size_t i = 0; i < nbyte; i++) {
@@ -702,7 +698,7 @@
}
// Write from buffer to SPI
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
WHILE_TX(0);
//WHILE_RX(0);
@@ -759,7 +755,6 @@
*
* All of the above can be avoided by defining FORCE_SOFT_SPI to force the
* display to use software SPI.
*
*/
void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified)
@@ -802,19 +797,19 @@
uint8_t spiRec() { return (uint8_t)spiTransfer(0xFF); }
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
for (int i = 0; i < nbyte; i++)
buf[i] = spiTransfer(0xFF);
}
void spiSend(uint8_t data) { spiTransfer(data); }
void spiSend(const uint8_t* buf, size_t nbyte) {
void spiSend(const uint8_t *buf, size_t nbyte) {
for (uint16_t i = 0; i < nbyte; i++)
spiTransfer(buf[i]);
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
spiTransfer(token);
for (uint16_t i = 0; i < 512; i++)
spiTransfer(buf[i]);

2
Marlin/src/HAL/DUE/InterruptVectors.cpp Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/

2
Marlin/src/HAL/DUE/InterruptVectors.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

26
Marlin/src/HAL/DUE/MarlinSPI.h Normal file
View File

@@ -0,0 +1,26 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <SPI.h>
using MarlinSPI = SPIClass;

175
Marlin/src/HAL/DUE/MarlinSerial.cpp Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
@@ -382,7 +382,7 @@ void MarlinSerial<Cfg>::flush() {
}
template<typename Cfg>
void MarlinSerial<Cfg>::write(const uint8_t c) {
size_t MarlinSerial<Cfg>::write(const uint8_t c) {
_written = true;
if (Cfg::TX_SIZE == 0) {
@@ -400,7 +400,7 @@ void MarlinSerial<Cfg>::write(const uint8_t c) {
// XOFF char at the RX isr, but it is properly handled there
if (!(HWUART->UART_IMR & UART_IMR_TXRDY) && (HWUART->UART_SR & UART_SR_TXRDY)) {
HWUART->UART_THR = c;
return;
return 1;
}
const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
@@ -428,6 +428,7 @@ void MarlinSerial<Cfg>::write(const uint8_t c) {
// Enable TX isr - Non atomic, but it will eventually enable TX isr
HWUART->UART_IER = UART_IER_TXRDY;
}
return 1;
}
template<typename Cfg>
@@ -473,169 +474,21 @@ void MarlinSerial<Cfg>::flushTX() {
}
}
/**
* Imports from print.h
*/
template<typename Cfg>
void MarlinSerial<Cfg>::print(char c, int base) {
print((long)c, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(unsigned char b, int base) {
print((unsigned long)b, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(int n, int base) {
print((long)n, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(unsigned int n, int base) {
print((unsigned long)n, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(long n, int base) {
if (base == 0) write(n);
else if (base == 10) {
if (n < 0) { print('-'); n = -n; }
printNumber(n, 10);
}
else
printNumber(n, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(unsigned long n, int base) {
if (base == 0) write(n);
else printNumber(n, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(double n, int digits) {
printFloat(n, digits);
}
template<typename Cfg>
void MarlinSerial<Cfg>::println() {
print('\r');
print('\n');
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(const String& s) {
print(s);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(const char c[]) {
print(c);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(char c, int base) {
print(c, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(unsigned char b, int base) {
print(b, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(int n, int base) {
print(n, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(unsigned int n, int base) {
print(n, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(long n, int base) {
print(n, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(unsigned long n, int base) {
print(n, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(double n, int digits) {
print(n, digits);
println();
}
// Private Methods
template<typename Cfg>
void MarlinSerial<Cfg>::printNumber(unsigned long n, uint8_t base) {
if (n) {
unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
int8_t i = 0;
while (n) {
buf[i++] = n % base;
n /= base;
}
while (i--)
print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
}
else
print('0');
}
template<typename Cfg>
void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
// Handle negative numbers
if (number < 0.0) {
print('-');
number = -number;
}
// Round correctly so that print(1.999, 2) prints as "2.00"
double rounding = 0.5;
LOOP_L_N(i, digits) rounding *= 0.1;
number += rounding;
// Extract the integer part of the number and print it
unsigned long int_part = (unsigned long)number;
double remainder = number - (double)int_part;
print(int_part);
// Print the decimal point, but only if there are digits beyond
if (digits) {
print('.');
// Extract digits from the remainder one at a time
while (digits--) {
remainder *= 10.0;
int toPrint = int(remainder);
print(toPrint);
remainder -= toPrint;
}
}
}
// If not using the USB port as serial port
#if SERIAL_PORT >= 0
template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>; // Define
MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1; // Instantiate
#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;
MSerialT1 customizedSerial1(MarlinSerialCfg<SERIAL_PORT>::EMERGENCYPARSER);
#endif
#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>; // Define
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> >;
MSerialT2 customizedSerial2(MarlinSerialCfg<SERIAL_PORT_2>::EMERGENCYPARSER);
#endif
#if defined(SERIAL_PORT_3) && SERIAL_PORT_3 >= 0
template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> >;
MSerialT3 customizedSerial3(MarlinSerialCfg<SERIAL_PORT_3>::EMERGENCYPARSER);
#endif
#endif // ARDUINO_ARCH_SAM

54
Marlin/src/HAL/DUE/MarlinSerial.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
@@ -30,11 +30,7 @@
#include <WString.h>
#include "../../inc/MarlinConfigPre.h"
#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2
#include "../../core/serial_hook.h"
// Define constants and variables for buffering incoming serial data. We're
// using a ring buffer (I think), in which rx_buffer_head is the index of the
@@ -119,42 +115,15 @@ public:
static int read();
static void flush();
static ring_buffer_pos_t available();
static void write(const uint8_t c);
static size_t write(const uint8_t c);
static void flushTX();
static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
FORCE_INLINE static void print(const char* str) { write(str); }
static void print(char, int = 0);
static void print(unsigned char, int = 0);
static void print(int, int = DEC);
static void print(unsigned int, int = DEC);
static void print(long, int = DEC);
static void print(unsigned long, int = DEC);
static void print(double, int = 2);
static void println(const String& s);
static void println(const char[]);
static void println(char, int = 0);
static void println(unsigned char, int = 0);
static void println(int, int = DEC);
static void println(unsigned int, int = DEC);
static void println(long, int = DEC);
static void println(unsigned long, int = DEC);
static void println(double, int = 2);
static void println();
operator bool() { return true; }
private:
static void printNumber(unsigned long, const uint8_t);
static void printFloat(double, uint8_t);
};
// Serial port configuration
@@ -171,10 +140,17 @@ struct MarlinSerialCfg {
static constexpr bool MAX_RX_QUEUED = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
};
#if SERIAL_PORT >= 0
extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT1;
extern MSerialT1 customizedSerial1;
#endif
#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
extern MSerialT2 customizedSerial2;
#endif
#if defined(SERIAL_PORT_3) && SERIAL_PORT_3 >= 0
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> > > MSerialT3;
extern MSerialT3 customizedSerial3;
#endif

188
Marlin/src/HAL/DUE/MarlinSerialUSB.cpp Executable file → Normal file
View File

@@ -16,16 +16,16 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
/**
* MarlinSerial_Due.cpp - Hardware serial library for Arduino DUE
* Copyright (c) 2017 Eduardo José Tagle. All right reserved
* Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti. All right reserved.
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfig.h"
@@ -33,10 +33,6 @@
#include "MarlinSerialUSB.h"
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
#endif
// Imports from Atmel USB Stack/CDC implementation
extern "C" {
bool usb_task_cdc_isenabled();
@@ -50,10 +46,6 @@ extern "C" {
// Pending character
static int pending_char = -1;
#if ENABLED(EMERGENCY_PARSER)
static EmergencyParser::State emergency_state; // = EP_RESET
#endif
// Public Methods
void MarlinSerialUSB::begin(const long) {}
@@ -73,9 +65,7 @@ int MarlinSerialUSB::peek() {
pending_char = udi_cdc_getc();
#if ENABLED(EMERGENCY_PARSER)
emergency_parser.update(emergency_state, (char)pending_char);
#endif
TERN_(EMERGENCY_PARSER, emergency_parser.update(static_cast<MSerialT1*>(this)->emergency_state, (char)pending_char));
return pending_char;
}
@@ -97,31 +87,27 @@ int MarlinSerialUSB::read() {
int c = udi_cdc_getc();
#if ENABLED(EMERGENCY_PARSER)
emergency_parser.update(emergency_state, (char)c);
#endif
TERN_(EMERGENCY_PARSER, emergency_parser.update(static_cast<MSerialT1*>(this)->emergency_state, (char)c));
return c;
}
bool MarlinSerialUSB::available() {
/* If Pending chars */
return pending_char >= 0 ||
/* or USB CDC enumerated and configured on the PC side and some
bytes where sent to us */
(usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
int MarlinSerialUSB::available() {
if (pending_char > 0) return pending_char;
return pending_char == 0 ||
// or USB CDC enumerated and configured on the PC side and some bytes where sent to us */
(usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
}
void MarlinSerialUSB::flush() { }
void MarlinSerialUSB::flushTX() { }
void MarlinSerialUSB::write(const uint8_t c) {
size_t MarlinSerialUSB::write(const uint8_t c) {
/* Do not even bother sending anything if USB CDC is not enumerated
or not configured on the PC side or there is no program on the PC
listening to our messages */
if (!usb_task_cdc_isenabled() || !usb_task_cdc_dtr_active())
return;
return 0;
/* Wait until the PC has read the pending to be sent data */
while (usb_task_cdc_isenabled() &&
@@ -133,161 +119,23 @@ void MarlinSerialUSB::write(const uint8_t c) {
or not configured on the PC side or there is no program on the PC
listening to our messages at this point */
if (!usb_task_cdc_isenabled() || !usb_task_cdc_dtr_active())
return;
return 0;
// Fifo full
// udi_cdc_signal_overrun();
udi_cdc_putc(c);
}
/**
* Imports from print.h
*/
void MarlinSerialUSB::print(char c, int base) {
print((long)c, base);
}
void MarlinSerialUSB::print(unsigned char b, int base) {
print((unsigned long)b, base);
}
void MarlinSerialUSB::print(int n, int base) {
print((long)n, base);
}
void MarlinSerialUSB::print(unsigned int n, int base) {
print((unsigned long)n, base);
}
void MarlinSerialUSB::print(long n, int base) {
if (base == 0)
write(n);
else if (base == 10) {
if (n < 0) {
print('-');
n = -n;
}
printNumber(n, 10);
}
else
printNumber(n, base);
}
void MarlinSerialUSB::print(unsigned long n, int base) {
if (base == 0) write(n);
else printNumber(n, base);
}
void MarlinSerialUSB::print(double n, int digits) {
printFloat(n, digits);
}
void MarlinSerialUSB::println() {
print('\r');
print('\n');
}
void MarlinSerialUSB::println(const String& s) {
print(s);
println();
}
void MarlinSerialUSB::println(const char c[]) {
print(c);
println();
}
void MarlinSerialUSB::println(char c, int base) {
print(c, base);
println();
}
void MarlinSerialUSB::println(unsigned char b, int base) {
print(b, base);
println();
}
void MarlinSerialUSB::println(int n, int base) {
print(n, base);
println();
}
void MarlinSerialUSB::println(unsigned int n, int base) {
print(n, base);
println();
}
void MarlinSerialUSB::println(long n, int base) {
print(n, base);
println();
}
void MarlinSerialUSB::println(unsigned long n, int base) {
print(n, base);
println();
}
void MarlinSerialUSB::println(double n, int digits) {
print(n, digits);
println();
}
// Private Methods
void MarlinSerialUSB::printNumber(unsigned long n, uint8_t base) {
if (n) {
unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
int8_t i = 0;
while (n) {
buf[i++] = n % base;
n /= base;
}
while (i--)
print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
}
else
print('0');
}
void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
// Handle negative numbers
if (number < 0.0) {
print('-');
number = -number;
}
// Round correctly so that print(1.999, 2) prints as "2.00"
double rounding = 0.5;
LOOP_L_N(i, digits)
rounding *= 0.1;
number += rounding;
// Extract the integer part of the number and print it
unsigned long int_part = (unsigned long)number;
double remainder = number - (double)int_part;
print(int_part);
// Print the decimal point, but only if there are digits beyond
if (digits) {
print('.');
// Extract digits from the remainder one at a time
while (digits--) {
remainder *= 10.0;
int toPrint = int(remainder);
print(toPrint);
remainder -= toPrint;
}
}
return 1;
}
// Preinstantiate
#if SERIAL_PORT == -1
MarlinSerialUSB customizedSerial1;
MSerialT1 customizedSerial1(TERN0(EMERGENCY_PARSER, true));
#endif
#if SERIAL_PORT_2 == -1
MarlinSerialUSB customizedSerial2;
MSerialT2 customizedSerial2(TERN0(EMERGENCY_PARSER, true));
#endif
#if SERIAL_PORT_3 == -1
MSerialT3 customizedSerial3(TERN0(EMERGENCY_PARSER, true));
#endif
#endif // HAS_USB_SERIAL

74
Marlin/src/HAL/DUE/MarlinSerialUSB.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
@@ -27,73 +27,39 @@
*/
#include "../../inc/MarlinConfig.h"
#if HAS_USB_SERIAL
#include "../../core/serial_hook.h"
#include <WString.h>
#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2
class MarlinSerialUSB {
public:
MarlinSerialUSB() {};
static void begin(const long);
static void end();
static int peek();
static int read();
static void flush();
static void flushTX();
static bool available();
static void write(const uint8_t c);
struct MarlinSerialUSB {
void begin(const long);
void end();
int peek();
int read();
void flush();
int available();
size_t write(const uint8_t c);
#if ENABLED(SERIAL_STATS_DROPPED_RX)
FORCE_INLINE static uint32_t dropped() { return 0; }
FORCE_INLINE uint32_t dropped() { return 0; }
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
FORCE_INLINE static int rxMaxEnqueued() { return 0; }
FORCE_INLINE int rxMaxEnqueued() { return 0; }
#endif
FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
FORCE_INLINE static void print(const char* str) { write(str); }
static void print(char, int = 0);
static void print(unsigned char, int = 0);
static void print(int, int = DEC);
static void print(unsigned int, int = DEC);
static void print(long, int = DEC);
static void print(unsigned long, int = DEC);
static void print(double, int = 2);
static void println(const String& s);
static void println(const char[]);
static void println(char, int = 0);
static void println(unsigned char, int = 0);
static void println(int, int = DEC);
static void println(unsigned int, int = DEC);
static void println(long, int = DEC);
static void println(unsigned long, int = DEC);
static void println(double, int = 2);
static void println();
operator bool() { return true; }
private:
static void printNumber(unsigned long, const uint8_t);
static void printFloat(double, uint8_t);
};
#if SERIAL_PORT == -1
extern MarlinSerialUSB customizedSerial1;
typedef Serial1Class<MarlinSerialUSB> MSerialT1;
extern MSerialT1 customizedSerial1;
#endif
#if SERIAL_PORT_2 == -1
extern MarlinSerialUSB customizedSerial2;
typedef Serial1Class<MarlinSerialUSB> MSerialT2;
extern MSerialT2 customizedSerial2;
#endif
#endif // HAS_USB_SERIAL
#if SERIAL_PORT_3 == -1
typedef Serial1Class<MarlinSerialUSB> MSerialT3;
extern MSerialT3 customizedSerial3;
#endif

3
Marlin/src/HAL/DUE/Servo.cpp Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
@@ -44,7 +44,6 @@
#if HAS_SERVOS
#include "../shared/Marduino.h"
#include "../shared/servo.h"
#include "../shared/servo_private.h"

0
Marlin/src/HAL/DUE/ServoTimers.h Executable file → Normal file
View File

5
Marlin/src/HAL/DUE/Tone.cpp Executable file → Normal file
View File

@@ -18,20 +18,19 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Description: Tone function for Arduino Due and compatible (SAM3X8E)
* Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
* Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfig.h"
#include "HAL.h"
#include "timers.h"
static pin_t tone_pin;
volatile static int32_t toggles;

27
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp Executable file → Normal file
View File

@@ -16,11 +16,10 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Based on u8g_com_msp430_hw_spi.c
*
@@ -52,25 +51,23 @@
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifdef __SAM3X8E__
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
#include <U8glib-HAL.h>
#include "../../../MarlinCore.h"
void spiBegin();
void spiInit(uint8_t spiRate);
void spiSend(uint8_t b);
void spiSend(const uint8_t* buf, size_t n);
#ifndef LCD_SPI_SPEED
#define LCD_SPI_SPEED SPI_QUARTER_SPEED
#endif
#include "../../shared/Marduino.h"
#include "../../shared/HAL_SPI.h"
#include "../fastio.h"
void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
@@ -101,11 +98,7 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
spiBegin();
#ifndef SPI_SPEED
#define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
#endif
spiInit(2);
spiInit(LCD_SPI_SPEED);
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
@@ -145,6 +138,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif //__SAM3X8E__
#endif // __SAM3X8E__

7
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
@@ -59,9 +59,10 @@
#if ENABLED(U8GLIB_ST7920)
#include "../../../inc/MarlinConfig.h"
#include "../../shared/Delay.h"
#include <U8glib.h>
#include <U8glib-HAL.h>
#include "u8g_com_HAL_DUE_sw_spi_shared.h"
@@ -145,7 +146,7 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
}
#if ENABLED(LIGHTWEIGHT_UI)
#include "../../../lcd/ultralcd.h"
#include "../../../lcd/marlinui.h"
#include "../../shared/HAL_ST7920.h"
#define ST7920_CS_PIN LCD_PINS_RS

11
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
@@ -57,17 +57,14 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
#undef SPI_SPEED
#define SPI_SPEED 2 // About 2 MHz
#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
#include "u8g_com_HAL_DUE_sw_spi_shared.h"
#include "../../shared/Marduino.h"
#include "../../shared/Delay.h"
#include <U8glib.h>
#include <U8glib-HAL.h>
#if ENABLED(FYSETC_MINI_12864)
#define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_3
@@ -144,5 +141,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
return 1;
}
#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
#endif // ARDUINO_ARCH_SAM

9
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
@@ -57,11 +57,12 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "../../../inc/MarlinConfig.h"
#include "../../shared/Delay.h"
#include <U8glib.h>
#include <U8glib-HAL.h>
#include "u8g_com_HAL_DUE_sw_spi_shared.h"
@@ -108,5 +109,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
}
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // ARDUINO_ARCH_SAM

4
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h Executable file → Normal file
View File

@@ -16,14 +16,14 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../../inc/MarlinConfigPre.h"
#include "../../shared/Marduino.h"
#include <U8glib.h>
#include <U8glib-HAL.h>
void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index);
void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level);

248
Marlin/src/HAL/DUE/EepromEmulation.cpp → Marlin/src/HAL/DUE/eeprom_flash.cpp Executable file → Normal file
View File

@@ -1,9 +1,10 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -16,9 +17,14 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfig.h"
#if ENABLED(FLASH_EEPROM_EMULATION)
/* EEPROM emulation over flash with reduced wear
*
@@ -47,22 +53,14 @@
* per page. We can't emulate EE endurance with FLASH for all
* bytes, but we can emulate endurance for a given percent of
* bytes.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfig.h"
#if ENABLED(FLASH_EEPROM_EMULATION)
#include "../shared/Marduino.h"
#include "../shared/eeprom_api.h"
//#define EE_EMU_DEBUG
#define EEPROMSize 4096
#define PagesPerGroup 128
#define GroupCount 2
#define PageSize 256u
#define PageSize 256U
/* Flash storage */
typedef struct FLASH_SECTOR {
@@ -134,15 +132,18 @@ static uint8_t buffer[256] = {0}, // The RAM buffer to accumulate writes
curPage = 0, // Current FLASH page inside the group
curGroup = 0xFF; // Current FLASH group
//#define EE_EMU_DEBUG
#ifdef EE_EMU_DEBUG
static void ee_Dump(int page,const void* data) {
#define DEBUG_OUT ENABLED(EE_EMU_DEBUG)
#include "../../core/debug_out.h"
const uint8_t* c = (const uint8_t*) data;
static void ee_Dump(const int page, const void *data) {
#ifdef EE_EMU_DEBUG
const uint8_t *c = (const uint8_t*) data;
char buffer[80];
sprintf_P(buffer, PSTR("Page: %d (0x%04x)\n"), page, page);
SERIAL_ECHO(buffer);
DEBUG_ECHO(buffer);
char* p = &buffer[0];
for (int i = 0; i< PageSize; ++i) {
@@ -152,12 +153,16 @@ static uint8_t buffer[256] = {0}, // The RAM buffer to accumulate writes
if ((i & 0xF) == 0xF) {
*p++ = '\n';
*p = 0;
SERIAL_ECHO(buffer);
DEBUG_ECHO(buffer);
p = &buffer[0];
}
}
}
#endif
#else
UNUSED(page);
UNUSED(data);
#endif
}
/* Flash Writing Protection Key */
#define FWP_KEY 0x5Au
@@ -170,17 +175,16 @@ static uint8_t buffer[256] = {0}, // The RAM buffer to accumulate writes
#define EEFC_ERROR_FLAGS (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE)
#endif
/**
* Writes the contents of the specified page (no previous erase)
* @param page (page #)
* @param data (pointer to the data buffer)
*/
__attribute__ ((long_call, section (".ramfunc")))
static bool ee_PageWrite(uint16_t page,const void* data) {
static bool ee_PageWrite(uint16_t page, const void *data) {
uint16_t i;
uint32_t addrflash = ((uint32_t)getFlashStorage(page));
uint32_t addrflash = uint32_t(getFlashStorage(page));
// Read the flash contents
uint32_t pageContents[PageSize>>2];
@@ -195,13 +199,11 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
for (i = 0; i <PageSize >> 2; i++)
pageContents[i] = (((uint32_t*)data)[i]) | (~(pageContents[i] ^ ((uint32_t*)data)[i]));
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM PageWrite ", page);
SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
SERIAL_ECHOLNPAIR(" base address ", (uint32_t)getFlashStorage(0));
SERIAL_FLUSH();
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM PageWrite ", page);
DEBUG_ECHOLNPGM(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPGM(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_FLUSH();
// Get the page relative to the start of the EFC controller, and the EFC controller to use
Efc *efc;
@@ -243,10 +245,8 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
// Reenable interrupts
__enable_irq();
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Unlock failure for page ", page);
return false;
}
@@ -270,10 +270,9 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
// Reenable interrupts
__enable_irq();
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Write failure for page ", page);
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Write failure for page ", page);
return false;
}
@@ -287,15 +286,15 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
if (memcmp(getFlashStorage(page),data,PageSize)) {
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Verify Write failure for page ", page);
ee_Dump( page,(uint32_t *) addrflash);
ee_Dump(-page,data);
ee_Dump( page, (uint32_t *)addrflash);
ee_Dump(-page, data);
// Calculate count of changed bits
uint32_t* p1 = (uint32_t*)addrflash;
uint32_t* p2 = (uint32_t*)data;
uint32_t *p1 = (uint32_t*)addrflash;
uint32_t *p2 = (uint32_t*)data;
int count = 0;
for (i =0; i<PageSize >> 2; i++) {
if (p1[i] != p2[i]) {
@@ -307,7 +306,7 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
}
}
}
SERIAL_ECHOLNPAIR("--> Differing bits: ", count);
DEBUG_ECHOLNPGM("--> Differing bits: ", count);
#endif
return false;
@@ -324,15 +323,13 @@ __attribute__ ((long_call, section (".ramfunc")))
static bool ee_PageErase(uint16_t page) {
uint16_t i;
uint32_t addrflash = ((uint32_t)getFlashStorage(page));
uint32_t addrflash = uint32_t(getFlashStorage(page));
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM PageErase ", page);
SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
SERIAL_ECHOLNPAIR(" base address ", (uint32_t)getFlashStorage(0));
SERIAL_FLUSH();
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM PageErase ", page);
DEBUG_ECHOLNPGM(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPGM(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_FLUSH();
// Get the page relative to the start of the EFC controller, and the EFC controller to use
Efc *efc;
@@ -373,10 +370,9 @@ static bool ee_PageErase(uint16_t page) {
// Reenable interrupts
__enable_irq();
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Unlock failure for page ",page);
return false;
}
@@ -398,10 +394,9 @@ static bool ee_PageErase(uint16_t page) {
// Reenable interrupts
__enable_irq();
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Erase failure for page ",page);
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Erase failure for page ",page);
return false;
}
@@ -415,20 +410,17 @@ static bool ee_PageErase(uint16_t page) {
uint32_t * aligned_src = (uint32_t *) addrflash;
for (i = 0; i < PageSize >> 2; i++) {
if (*aligned_src++ != 0xFFFFFFFF) {
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
ee_Dump( page,(uint32_t *) addrflash);
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Verify Erase failure for page ",page);
ee_Dump(page, (uint32_t *)addrflash);
return false;
}
}
return true;
}
static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer = false) {
static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
uint32_t baddr;
uint32_t blen;
@@ -478,7 +470,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer = false) {
for (int page = curPage - 1; page >= 0; --page) {
// Get a pointer to the flash page
uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
uint16_t i = 0;
while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -511,7 +503,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer = false) {
return 0xFF;
}
static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer = false) {
static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
uint32_t baddr,
blen,
nextAddr = 0xFFFF,
@@ -558,7 +550,7 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer = false)
for (int page = curPage - 1; page >= 0; --page) {
// Get a pointer to the flash page
uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
uint16_t i = 0;
while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -597,17 +589,17 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer = false)
}
static bool ee_IsPageClean(int page) {
uint32_t* pflash = (uint32_t*) getFlashStorage(page);
uint32_t *pflash = (uint32_t*) getFlashStorage(page);
for (uint16_t i = 0; i < (PageSize >> 2); ++i)
if (*pflash++ != 0xFFFFFFFF) return false;
return true;
}
static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData = 0xFF) {
static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData=0xFF) {
// Check if RAM buffer has something to be written
bool isEmpty = true;
uint32_t* p = (uint32_t*) &buffer[0];
uint32_t *p = (uint32_t*) &buffer[0];
for (uint16_t j = 0; j < (PageSize >> 2); j++) {
if (*p++ != 0xFFFFFFFF) {
isEmpty = false;
@@ -929,11 +921,9 @@ static void ee_Init() {
// If all groups seem to be used, default to first group
if (curGroup >= GroupCount) curGroup = 0;
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
SERIAL_FLUSH();
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Current Group: ",curGroup);
DEBUG_FLUSH();
// Now, validate that all the other group pages are empty
for (int grp = 0; grp < GroupCount; grp++) {
@@ -941,11 +931,9 @@ static void ee_Init() {
for (int page = 0; page < PagesPerGroup; page++) {
if (!ee_IsPageClean(grp * PagesPerGroup + page)) {
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
SERIAL_FLUSH();
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Page ", page, " not clean on group ", grp);
DEBUG_FLUSH();
ee_PageErase(grp * PagesPerGroup + page);
}
}
@@ -955,66 +943,68 @@ static void ee_Init() {
// and also validate that all the other ones are clean
for (curPage = 0; curPage < PagesPerGroup; curPage++) {
if (ee_IsPageClean(curGroup * PagesPerGroup + curPage)) {
#ifdef EE_EMU_DEBUG
ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
#endif
ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
break;
}
}
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Active page: ", curPage);
SERIAL_FLUSH();
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Active page: ", curPage);
DEBUG_FLUSH();
// Make sure the pages following the first clean one are also clean
for (int page = curPage + 1; page < PagesPerGroup; page++) {
if (!ee_IsPageClean(curGroup * PagesPerGroup + page)) {
#ifdef EE_EMU_DEBUG
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
SERIAL_FLUSH();
ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
#endif
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("EEPROM Page ", page, " not clean on active group ", curGroup);
DEBUG_FLUSH();
ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
ee_PageErase(curGroup * PagesPerGroup + page);
}
}
}
uint8_t eeprom_read_byte(uint8_t* addr) {
ee_Init();
return ee_Read((uint32_t)addr);
}
/* PersistentStore -----------------------------------------------------------*/
void eeprom_write_byte(uint8_t* addr, uint8_t value) {
ee_Init();
ee_Write((uint32_t)addr, value);
}
#include "../shared/eeprom_api.h"
void eeprom_update_block(const void* __src, void* __dst, size_t __n) {
uint8_t* dst = (uint8_t*)__dst;
const uint8_t* src = (const uint8_t*)__src;
while (__n--) {
eeprom_write_byte(dst, *src);
++dst;
++src;
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#endif
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
bool PersistentStore::access_start() { ee_Init(); return true; }
bool PersistentStore::access_finish() { ee_Flush(); return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
if (v != ee_Read(uint32_t(p))) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
ee_Write(uint32_t(p), v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (ee_Read(uint32_t(p)) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
}
}
crc16(crc, &v, 1);
pos++;
value++;
}
return false;
}
void eeprom_read_block(void* __dst, const void* __src, size_t __n) {
uint8_t* dst = (uint8_t*)__dst;
uint8_t* src = (uint8_t*)__src;
while (__n--) {
*dst = eeprom_read_byte(src);
++dst;
++src;
}
}
void eeprom_flush() {
ee_Flush();
bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
do {
uint8_t c = ee_Read(uint32_t(pos));
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
value++;
} while (--size);
return false;
}
#endif // FLASH_EEPROM_EMULATION
#endif // ARDUINO_ARCH_AVR
#endif // ARDUINO_ARCH_SAM

48
Marlin/src/HAL/DUE/eeprom.cpp → Marlin/src/HAL/DUE/eeprom_wired.cpp Executable file → Normal file
View File

@@ -17,42 +17,38 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(EEPROM_SETTINGS)
#include "../../inc/MarlinConfig.h"
#if USE_WIRED_EEPROM
/**
* PersistentStore for Arduino-style EEPROM interface
* with simple implementations supplied by Marlin.
*/
#include "../shared/eeprom_if.h"
#include "../shared/eeprom_api.h"
#if !defined(E2END) && ENABLED(FLASH_EEPROM_EMULATION)
#define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
#ifndef MARLIN_EEPROM_SIZE
#error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
#endif
extern void eeprom_flush();
bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() {
#if ENABLED(FLASH_EEPROM_EMULATION)
eeprom_flush();
#endif
return true;
}
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
bool PersistentStore::access_start() { eeprom_init(); return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
delay(2);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
@@ -61,11 +57,11 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
crc16(crc, &v, 1);
pos++;
value++;
};
}
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
do {
uint8_t c = eeprom_read_byte((uint8_t*)pos);
if (writing) *value = c;
@@ -76,7 +72,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
return false;
}
size_t PersistentStore::capacity() { return E2END + 1; }
#endif // EEPROM_SETTINGS
#endif // USE_WIRED_EEPROM
#endif // ARDUINO_ARCH_SAM

64
Marlin/src/HAL/DUE/endstop_interrupts.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
@@ -47,43 +47,27 @@ void endstop_ISR() { endstops.update(); }
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX
_ATTACH(X_MAX_PIN);
#endif
#if HAS_X_MIN
_ATTACH(X_MIN_PIN);
#endif
#if HAS_Y_MAX
_ATTACH(Y_MAX_PIN);
#endif
#if HAS_Y_MIN
_ATTACH(Y_MIN_PIN);
#endif
#if HAS_Z_MAX
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_Z2_MAX
_ATTACH(Z2_MAX_PIN);
#endif
#if HAS_Z2_MIN
_ATTACH(Z2_MIN_PIN);
#endif
#if HAS_Z3_MAX
_ATTACH(Z3_MAX_PIN);
#endif
#if HAS_Z3_MIN
_ATTACH(Z3_MIN_PIN);
#endif
#if HAS_Z4_MAX
_ATTACH(Z4_MAX_PIN);
#endif
#if HAS_Z4_MIN
_ATTACH(Z4_MIN_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
_ATTACH(Z_MIN_PROBE_PIN);
#endif
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
}

15
Marlin/src/HAL/DUE/fastio.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
@@ -33,7 +33,7 @@
* For ARDUINO_ARCH_SAM
* Note the code here was specifically crafted by disassembling what GCC produces
* out of it, so GCC is able to optimize it out as much as possible to the least
* amount of instructions. Be very carefull if you modify them, as "clean code"
* amount of instructions. Be very careful if you modify them, as "clean code"
* leads to less efficient compiled code!!
*/
@@ -50,7 +50,7 @@
#define PWM_PIN(P) WITHIN(P, 2, 13)
#ifndef MASK
#define MASK(PIN) (1 << PIN)
#define MASK(PIN) _BV(PIN)
#endif
/**
@@ -58,7 +58,7 @@
*
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/
// Read a pin
@@ -163,6 +163,9 @@
#define SET_INPUT(IO) _SET_INPUT(IO)
// Set pin as input with pullup (wrapper)
#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
// Set pin as input with pulldown (substitution)
#define SET_INPUT_PULLDOWN SET_INPUT
// Set pin as output (wrapper) - reads the pin and sets the output to that value
#define SET_OUTPUT(IO) _SET_OUTPUT(IO)
// Set pin as PWM
@@ -174,7 +177,7 @@
#define IS_OUTPUT(IO) ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) != 0)
// Shorthand
#define OUT_WRITE(IO,V) { SET_OUTPUT(IO); WRITE(IO,V); }
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
@@ -477,7 +480,7 @@
#define DIO91_PIN 15
#define DIO91_WPORT PIOB
#if ARDUINO_SAM_ARCHIM
#ifdef ARDUINO_SAM_ARCHIM
#define DIO92_PIN 11
#define DIO92_WPORT PIOC

4
Marlin/src/HAL/DUE/fastio/G2_PWM.cpp Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
@@ -154,7 +154,7 @@ void Stepper::digipot_init() {
NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0)); // normal priority for PWM module (can stand some jitter on the Vref signals)
}
void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
void Stepper::set_digipot_current(const uint8_t driver, const int16_t current) {
if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init(); // Init PWM system if needed

2
Marlin/src/HAL/DUE/fastio/G2_PWM.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

2
Marlin/src/HAL/DUE/fastio/G2_pins.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

6
Marlin/src/HAL/DUE/inc/Conditionals_LCD.h Executable file → Normal file
View File

@@ -16,7 +16,11 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if HAS_SPI_TFT || HAS_FSMC_TFT
#error "Sorry! TFT displays are not available for HAL/DUE."
#endif

2
Marlin/src/HAL/DUE/inc/Conditionals_adv.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

6
Marlin/src/HAL/DUE/inc/Conditionals_post.h Executable file → Normal file
View File

@@ -16,13 +16,13 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if USE_FALLBACK_EEPROM
#undef SRAM_EEPROM_EMULATION
#undef SDCARD_EEPROM_EMULATION
#define FLASH_EEPROM_EMULATION
#elif EITHER(I2C_EEPROM, SPI_EEPROM)
#define USE_SHARED_EEPROM 1
#endif

10
Marlin/src/HAL/DUE/inc/SanityCheck.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
@@ -40,7 +40,7 @@
* Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
* as the TMC2130 soft SPI the most common setup.
*/
#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN))
#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == SD_MOSI_PIN || TMC_SW_##P == SD_MISO_PIN || TMC_SW_##P == SD_SCK_PIN))
#if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
#if ENABLED(TMC_USE_SW_SPI)
@@ -52,10 +52,10 @@
#endif
#endif
#if ENABLED(FAST_PWM_FAN)
#error "FAST_PWM_FAN is not yet implemented for this platform."
#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
#error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on DUE."
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform."
#error "TMC220x Software Serial is not supported on the DUE platform."
#endif

9
Marlin/src/HAL/DUE/pinsDebug.h Executable file → Normal file
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -13,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
@@ -64,6 +67,7 @@
#define PRINT_PORT(p)
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
#define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL ? 1 : 0)
@@ -86,7 +90,7 @@ bool GET_PINMODE(int8_t pin) { // 1: output, 0: input
void pwm_details(int32_t pin) {
if (pwm_status(pin)) {
uint32_t chan = g_APinDescription[pin].ulPWMChannel;
SERIAL_ECHOPAIR("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
}
}
@@ -179,5 +183,4 @@ void pwm_details(int32_t pin) {
* ----------------+--------
* ID | PB11
* VBOF | PB10
*
*/

22
Marlin/src/HAL/DUE/spi_pins.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
@@ -43,22 +43,22 @@
#define SPI_PIN 87
#define SPI_CHAN 1
#endif
#define SCK_PIN 76
#define MISO_PIN 74
#define MOSI_PIN 75
#define SD_SCK_PIN 76
#define SD_MISO_PIN 74
#define SD_MOSI_PIN 75
#else
// defaults
#define DUE_SOFTWARE_SPI
#ifndef SCK_PIN
#define SCK_PIN 52
#ifndef SD_SCK_PIN
#define SD_SCK_PIN 52
#endif
#ifndef MISO_PIN
#define MISO_PIN 50
#ifndef SD_MISO_PIN
#define SD_MISO_PIN 50
#endif
#ifndef MOSI_PIN
#define MOSI_PIN 51
#ifndef SD_MOSI_PIN
#define SD_MOSI_PIN 51
#endif
#endif
/* A.28, A.29, B.21, C.26, C.29 */
#define SS_PIN SDSS
#define SD_SS_PIN SDSS

10
Marlin/src/HAL/DUE/timers.cpp Executable file → Normal file
View File

@@ -16,14 +16,12 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Description: HAL for Arduino Due and compatible (SAM3X8E)
*
* For ARDUINO_ARCH_SAM
* HAL Timers for Arduino Due and compatible (SAM3X8E)
*/
#ifdef ARDUINO_ARCH_SAM
@@ -34,8 +32,6 @@
#include "../../inc/MarlinConfig.h"
#include "HAL.h"
#include "timers.h"
// ------------------------
// Local defines
// ------------------------
@@ -125,7 +121,7 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num) {
// missing from CMSIS: Check if interrupt is enabled or not
static bool NVIC_GetEnabledIRQ(IRQn_Type IRQn) {
return (NVIC->ISER[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F))) != 0;
return TEST(NVIC->ISER[uint32_t(IRQn) >> 5], uint32_t(IRQn) & 0x1F);
}
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {

28
Marlin/src/HAL/DUE/timers.h Executable file → Normal file
View File

@@ -15,15 +15,13 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* HAL for Arduino Due and compatible (SAM3X8E)
*
* For ARDUINO_ARCH_SAM
* HAL Timers for Arduino Due and compatible (SAM3X8E)
*/
#include <stdint.h>
@@ -40,11 +38,17 @@ typedef uint32_t hal_timer_t;
#define HAL_TIMER_RATE ((F_CPU) / 2) // frequency of timers peripherals
#ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 2 // index of timer to use for stepper
#define STEP_TIMER_NUM 2 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 4 // Timer Index for Temperature
#endif
#ifndef TONE_TIMER_NUM
#define TONE_TIMER_NUM 6 // index of timer to use for beeper tones
#endif
#define TEMP_TIMER_NUM 4 // index of timer to use for temperature
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#define TONE_TIMER_NUM 6 // index of timer to use for beeper tones
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
@@ -66,8 +70,12 @@ typedef uint32_t hal_timer_t;
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() void TC2_Handler()
#endif
#define HAL_TEMP_TIMER_ISR() void TC4_Handler()
#define HAL_TONE_TIMER_ISR() void TC6_Handler()
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() void TC4_Handler()
#endif
#ifndef HAL_TONE_TIMER_ISR
#define HAL_TONE_TIMER_ISR() void TC6_Handler()
#endif
// ------------------------
// Types

18
Marlin/src/HAL/DUE/upload_extra_script.py Normal file
View File

@@ -0,0 +1,18 @@
#
# Set upload_command
#
# Windows: bossac.exe
# Other: leave unchanged
#
import platform
current_OS = platform.system()
if current_OS == 'Windows':
Import("env")
# Use bossac.exe on Windows
env.Replace(
UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot $SOURCE"
)

6
Marlin/src/HAL/DUE/usb/arduino_due_x.h Executable file → Normal file
View File

@@ -43,7 +43,7 @@
#pragma once
/**
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
/**
@@ -71,7 +71,7 @@
/* ------------------------------------------------------------------------ */
/**
* \page arduino_due_x_board_info "Arduino Due/X - Board informations"
* \page arduino_due_x_board_info "Arduino Due/X - Board information"
* This page lists several definition related to the board description.
*
*/
@@ -93,5 +93,5 @@
#define USB_VBOF_GPIO (PIO_PB10_IDX)
#define USB_VBOF_FLAGS (PIO_PERIPH_A | PIO_DEFAULT)
/*! Active level of the USB_VBOF output pin. */
#define USB_VBOF_ACTIVE_LEVEL LOW
#define USB_VBOF_ACTIVE_STATE LOW
/* ------------------------------------------------------------------------ */

167
Marlin/src/HAL/DUE/usb/compiler.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef UTILS_COMPILER_H
@@ -173,11 +173,11 @@
# define __always_inline __forceinline
#elif (defined __GNUC__)
#ifdef __always_inline
# undef __always_inline
# undef __always_inline
#endif
# define __always_inline inline __attribute__((__always_inline__))
# define __always_inline inline __attribute__((__always_inline__))
#elif (defined __ICCARM__)
# define __always_inline _Pragma("inline=forced")
# define __always_inline _Pragma("inline=forced")
#endif
/**
@@ -188,11 +188,11 @@
* heuristics and not inline the function.
*/
#ifdef __CC_ARM
# define __no_inline __attribute__((noinline))
# define __no_inline __attribute__((noinline))
#elif (defined __GNUC__)
# define __no_inline __attribute__((__noinline__))
# define __no_inline __attribute__((__noinline__))
#elif (defined __ICCARM__)
# define __no_inline _Pragma("inline=never")
# define __no_inline _Pragma("inline=never")
#endif
/*! \brief This macro is used to test fatal errors.
@@ -211,9 +211,9 @@
# else
#undef TEST_SUITE_DEFINE_ASSERT_MACRO
# define Assert(expr) \
{\
if (!(expr)) while (true);\
}
{\
if (!(expr)) while (true);\
}
# endif
#else
# define Assert(expr) ((void) 0)
@@ -609,37 +609,37 @@ typedef struct
# define clz(u) ((u) ? __CLZ(u) : 32)
#else
# define clz(u) (((u) == 0) ? 32 : \
((u) & (1ul << 31)) ? 0 : \
((u) & (1ul << 30)) ? 1 : \
((u) & (1ul << 29)) ? 2 : \
((u) & (1ul << 28)) ? 3 : \
((u) & (1ul << 27)) ? 4 : \
((u) & (1ul << 26)) ? 5 : \
((u) & (1ul << 25)) ? 6 : \
((u) & (1ul << 24)) ? 7 : \
((u) & (1ul << 23)) ? 8 : \
((u) & (1ul << 22)) ? 9 : \
((u) & (1ul << 21)) ? 10 : \
((u) & (1ul << 20)) ? 11 : \
((u) & (1ul << 19)) ? 12 : \
((u) & (1ul << 18)) ? 13 : \
((u) & (1ul << 17)) ? 14 : \
((u) & (1ul << 16)) ? 15 : \
((u) & (1ul << 15)) ? 16 : \
((u) & (1ul << 14)) ? 17 : \
((u) & (1ul << 13)) ? 18 : \
((u) & (1ul << 12)) ? 19 : \
((u) & (1ul << 11)) ? 20 : \
((u) & (1ul << 10)) ? 21 : \
((u) & (1ul << 9)) ? 22 : \
((u) & (1ul << 8)) ? 23 : \
((u) & (1ul << 7)) ? 24 : \
((u) & (1ul << 6)) ? 25 : \
((u) & (1ul << 5)) ? 26 : \
((u) & (1ul << 4)) ? 27 : \
((u) & (1ul << 3)) ? 28 : \
((u) & (1ul << 2)) ? 29 : \
((u) & (1ul << 1)) ? 30 : \
((u) & (1UL << 31)) ? 0 : \
((u) & (1UL << 30)) ? 1 : \
((u) & (1UL << 29)) ? 2 : \
((u) & (1UL << 28)) ? 3 : \
((u) & (1UL << 27)) ? 4 : \
((u) & (1UL << 26)) ? 5 : \
((u) & (1UL << 25)) ? 6 : \
((u) & (1UL << 24)) ? 7 : \
((u) & (1UL << 23)) ? 8 : \
((u) & (1UL << 22)) ? 9 : \
((u) & (1UL << 21)) ? 10 : \
((u) & (1UL << 20)) ? 11 : \
((u) & (1UL << 19)) ? 12 : \
((u) & (1UL << 18)) ? 13 : \
((u) & (1UL << 17)) ? 14 : \
((u) & (1UL << 16)) ? 15 : \
((u) & (1UL << 15)) ? 16 : \
((u) & (1UL << 14)) ? 17 : \
((u) & (1UL << 13)) ? 18 : \
((u) & (1UL << 12)) ? 19 : \
((u) & (1UL << 11)) ? 20 : \
((u) & (1UL << 10)) ? 21 : \
((u) & (1UL << 9)) ? 22 : \
((u) & (1UL << 8)) ? 23 : \
((u) & (1UL << 7)) ? 24 : \
((u) & (1UL << 6)) ? 25 : \
((u) & (1UL << 5)) ? 26 : \
((u) & (1UL << 4)) ? 27 : \
((u) & (1UL << 3)) ? 28 : \
((u) & (1UL << 2)) ? 29 : \
((u) & (1UL << 1)) ? 30 : \
31)
#endif
#endif
@@ -654,38 +654,38 @@ typedef struct
#if (defined __GNUC__) || (defined __CC_ARM)
# define ctz(u) ((u) ? __builtin_ctz(u) : 32)
#else
# define ctz(u) ((u) & (1ul << 0) ? 0 : \
(u) & (1ul << 1) ? 1 : \
(u) & (1ul << 2) ? 2 : \
(u) & (1ul << 3) ? 3 : \
(u) & (1ul << 4) ? 4 : \
(u) & (1ul << 5) ? 5 : \
(u) & (1ul << 6) ? 6 : \
(u) & (1ul << 7) ? 7 : \
(u) & (1ul << 8) ? 8 : \
(u) & (1ul << 9) ? 9 : \
(u) & (1ul << 10) ? 10 : \
(u) & (1ul << 11) ? 11 : \
(u) & (1ul << 12) ? 12 : \
(u) & (1ul << 13) ? 13 : \
(u) & (1ul << 14) ? 14 : \
(u) & (1ul << 15) ? 15 : \
(u) & (1ul << 16) ? 16 : \
(u) & (1ul << 17) ? 17 : \
(u) & (1ul << 18) ? 18 : \
(u) & (1ul << 19) ? 19 : \
(u) & (1ul << 20) ? 20 : \
(u) & (1ul << 21) ? 21 : \
(u) & (1ul << 22) ? 22 : \
(u) & (1ul << 23) ? 23 : \
(u) & (1ul << 24) ? 24 : \
(u) & (1ul << 25) ? 25 : \
(u) & (1ul << 26) ? 26 : \
(u) & (1ul << 27) ? 27 : \
(u) & (1ul << 28) ? 28 : \
(u) & (1ul << 29) ? 29 : \
(u) & (1ul << 30) ? 30 : \
(u) & (1ul << 31) ? 31 : \
# define ctz(u) ((u) & (1UL << 0) ? 0 : \
(u) & (1UL << 1) ? 1 : \
(u) & (1UL << 2) ? 2 : \
(u) & (1UL << 3) ? 3 : \
(u) & (1UL << 4) ? 4 : \
(u) & (1UL << 5) ? 5 : \
(u) & (1UL << 6) ? 6 : \
(u) & (1UL << 7) ? 7 : \
(u) & (1UL << 8) ? 8 : \
(u) & (1UL << 9) ? 9 : \
(u) & (1UL << 10) ? 10 : \
(u) & (1UL << 11) ? 11 : \
(u) & (1UL << 12) ? 12 : \
(u) & (1UL << 13) ? 13 : \
(u) & (1UL << 14) ? 14 : \
(u) & (1UL << 15) ? 15 : \
(u) & (1UL << 16) ? 16 : \
(u) & (1UL << 17) ? 17 : \
(u) & (1UL << 18) ? 18 : \
(u) & (1UL << 19) ? 19 : \
(u) & (1UL << 20) ? 20 : \
(u) & (1UL << 21) ? 21 : \
(u) & (1UL << 22) ? 22 : \
(u) & (1UL << 23) ? 23 : \
(u) & (1UL << 24) ? 24 : \
(u) & (1UL << 25) ? 25 : \
(u) & (1UL << 26) ? 26 : \
(u) & (1UL << 27) ? 27 : \
(u) & (1UL << 28) ? 28 : \
(u) & (1UL << 29) ? 29 : \
(u) & (1UL << 30) ? 30 : \
(u) & (1UL << 31) ? 31 : \
32)
#endif
#endif
@@ -1106,17 +1106,16 @@ static inline uint16_t convert_byte_array_to_16_bit(uint8_t *data)
/* Converts a 8 Byte array into a 32-Bit value */
static inline uint32_t convert_byte_array_to_32_bit(uint8_t *data)
{
union
{
uint32_t u32;
uint8_t u8[8];
}long_addr;
uint8_t index;
for (index = 0; index < 4; index++)
{
long_addr.u8[index] = *data++;
}
return long_addr.u32;
union
{
uint32_t u32;
uint8_t u8[8];
}long_addr;
uint8_t index;
for (index = 0; index < 4; index++) {
long_addr.u8[index] = *data++;
}
return long_addr.u32;
}
/**

2
Marlin/src/HAL/DUE/usb/conf_access.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _CONF_ACCESS_H_

2
Marlin/src/HAL/DUE/usb/conf_clock.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CONF_CLOCK_H_INCLUDED

6
Marlin/src/HAL/DUE/usb/conf_usb.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _CONF_USB_H_
@@ -78,10 +78,6 @@
//! To define a Full speed device
//#define USB_DEVICE_FULL_SPEED
#if MB(ARCHIM1)
#define USB_DEVICE_FULL_SPEED
#endif
//! To authorize the High speed
#ifndef USB_DEVICE_FULL_SPEED
#if (UC3A3||UC3A4)

2
Marlin/src/HAL/DUE/usb/ctrl_access.c Executable file → Normal file
View File

@@ -53,7 +53,7 @@
*
******************************************************************************/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/ctrl_access.h Executable file → Normal file
View File

@@ -53,7 +53,7 @@
*
******************************************************************************/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/

2
Marlin/src/HAL/DUE/usb/genclk.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CHIP_GENCLK_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/mrepeat.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _MREPEAT_H_

2
Marlin/src/HAL/DUE/usb/osc.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CHIP_OSC_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/pll.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CHIP_PLL_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/preprocessor.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _PREPROCESSOR_H_

2
Marlin/src/HAL/DUE/usb/sbc_protocol.h Executable file → Normal file
View File

@@ -52,7 +52,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _SBC_PROTOCOL_H_
#define _SBC_PROTOCOL_H_

26
Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.cpp Executable file → Normal file
View File

@@ -32,7 +32,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready() {
Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
return CTRL_NO_PRESENT;
*nb_sector = card.getSd2Card().cardSize() - 1;
*nb_sector = card.diskIODriver()->cardSize() - 1;
return CTRL_GOOD;
}
@@ -68,30 +68,30 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
{
char buffer[80];
sprintf_P(buffer, PSTR("SDRD: %d @ 0x%08x\n"), nb_sector, addr);
PORT_REDIRECT(0);
PORT_REDIRECT(SERIAL_PORTMASK(0));
SERIAL_ECHO(buffer);
}
#endif
// Start reading
if (!card.getSd2Card().readStart(addr))
if (!card.diskIODriver()->readStart(addr))
return CTRL_FAIL;
// For each specified sector
while (nb_sector--) {
// Read a sector
card.getSd2Card().readData(sector_buf);
card.diskIODriver()->readData(sector_buf);
// RAM -> USB
if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
card.getSd2Card().readStop();
if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
card.diskIODriver()->readStop();
return CTRL_FAIL;
}
}
// Stop reading
card.getSd2Card().readStop();
card.diskIODriver()->readStop();
// Done
return CTRL_GOOD;
@@ -108,29 +108,29 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
{
char buffer[80];
sprintf_P(buffer, PSTR("SDWR: %d @ 0x%08x\n"), nb_sector, addr);
PORT_REDIRECT(0);
PORT_REDIRECT(SERIAL_PORTMASK(0));
SERIAL_ECHO(buffer);
}
#endif
if (!card.getSd2Card().writeStart(addr, nb_sector))
if (!card.diskIODriver()->writeStart(addr, nb_sector))
return CTRL_FAIL;
// For each specified sector
while (nb_sector--) {
// USB -> RAM
if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
card.getSd2Card().writeStop();
if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
card.diskIODriver()->writeStop();
return CTRL_FAIL;
}
// Write a sector
card.getSd2Card().writeData(sector_buf);
card.diskIODriver()->writeData(sector_buf);
}
// Stop writing
card.getSd2Card().writeStop();
card.diskIODriver()->writeStop();
// Done
return CTRL_GOOD;

6
Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h Executable file → Normal file
View File

@@ -42,7 +42,7 @@
*
******************************************************************************/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
@@ -74,7 +74,7 @@
#define SD_MMC_REMOVING 2
//---- CONTROL FONCTIONS ----
//---- CONTROL FUNCTIONS ----
//!
//! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
//!/
@@ -134,7 +134,7 @@ extern bool sd_mmc_spi_wr_protect(void);
extern bool sd_mmc_spi_removal(void);
//---- ACCESS DATA FONCTIONS ----
//---- ACCESS DATA FUNCTIONS ----
#if ACCESS_USB == true
// Standard functions for open in read/write mode the device

2
Marlin/src/HAL/DUE/usb/spc_protocol.h Executable file → Normal file
View File

@@ -45,7 +45,7 @@
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _SPC_PROTOCOL_H_
#define _SPC_PROTOCOL_H_

2
Marlin/src/HAL/DUE/usb/stringz.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _STRINGZ_H_

2
Marlin/src/HAL/DUE/usb/sysclk.c Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/sysclk.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CHIP_SYSCLK_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/tpaste.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _TPASTE_H_

2
Marlin/src/HAL/DUE/usb/udc.c Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/udc.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDC_H_

2
Marlin/src/HAL/DUE/usb/udc_desc.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDC_DESC_H_

10
Marlin/src/HAL/DUE/usb/udd.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDD_H_
@@ -90,7 +90,7 @@ typedef struct {
//! This buffer must be word align for DATA IN phase (use prefix COMPILER_WORD_ALIGNED for buffer)
uint8_t *payload;
//! Size of buffer to send or fill, and content the number of byte transfered
//! Size of buffer to send or fill, and content the number of byte transferred
uint16_t payload_size;
//! Callback called after reception of ZLP from setup request
@@ -132,10 +132,10 @@ typedef void (*udd_callback_halt_cleared_t)(void);
*
* \param status UDD_EP_TRANSFER_OK, if transfer is complete
* \param status UDD_EP_TRANSFER_ABORT, if transfer is aborted
* \param n number of data transfered
* \param n number of data transferred
*/
typedef void (*udd_callback_trans_t) (udd_ep_status_t status,
iram_size_t nb_transfered, udd_ep_id_t ep);
iram_size_t nb_transferred, udd_ep_id_t ep);
/**
* \brief Authorizes the VBUS event
@@ -303,7 +303,7 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
* The driver uses a specific DMA USB to transfer data
* from internal RAM to endpoint, if this one is available.
* When the transfer is finished or aborted (stall, reset, ...), the \a callback is called.
* The \a callback returns the transfer status and eventually the number of byte transfered.
* The \a callback returns the transfer status and eventually the number of byte transferred.
* Note: The control endpoint is not authorized.
*
* \param ep The ID of the endpoint to use

2
Marlin/src/HAL/DUE/usb/udi.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDI_H_

6
Marlin/src/HAL/DUE/usb/udi_cdc.c Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM
@@ -162,7 +162,7 @@ static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep);
*
* \param status UDD_EP_TRANSFER_OK, if transfer finished
* \param status UDD_EP_TRANSFER_ABORT, if transfer aborted
* \param n number of data transfered
* \param n number of data transferred
*/
static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep);
@@ -200,7 +200,7 @@ static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_
*
* \param status UDD_EP_TRANSFER_OK, if transfer finished
* \param status UDD_EP_TRANSFER_ABORT, if transfer aborted
* \param n number of data transfered
* \param n number of data transferred
*/
static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep);

8
Marlin/src/HAL/DUE/usb/udi_cdc.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDI_CDC_H_
@@ -675,11 +675,11 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* - \code // Waits and gets a value on CDC line
int udi_cdc_getc(void);
// Reads a RAM buffer on CDC line
iram_size_t udi_cdc_read_buf(int* buf, iram_size_t size);
iram_size_t udi_cdc_read_buf(int *buf, iram_size_t size);
// Puts a byte on CDC line
int udi_cdc_putc(int value);
// Writes a RAM buffer on CDC line
iram_size_t udi_cdc_write_buf(const int* buf, iram_size_t size); \endcode
iram_size_t udi_cdc_write_buf(const int *buf, iram_size_t size); \endcode
*
* \section udi_cdc_use_cases Advanced use cases
* For more advanced use of the UDI CDC module, see the following use cases:
@@ -701,7 +701,7 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* another "Composite Device" module, like "USB HID Mouse (Composite Device)".
*
* Also, you can refer to application note
* <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* AVR4902 ASF - USB Composite Device</A>.
*
* \section udi_cdc_use_case_composite_setup Setup steps

4
Marlin/src/HAL/DUE/usb/udi_cdc_conf.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDI_CDC_CONF_H_
@@ -106,7 +106,7 @@ extern "C" {
*/
//@{
# if UDI_CDC_PORT_NB > 2
# error USBB, UDP, UDPHS and UOTGHS interfaces have not enought endpoints.
# error USBB, UDP, UDPHS and UOTGHS interfaces have not enough endpoints.
# endif
#define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
#define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX

2
Marlin/src/HAL/DUE/usb/udi_cdc_desc.c Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/udi_composite_desc.c Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

12
Marlin/src/HAL/DUE/usb/udi_msc.c Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM
@@ -173,7 +173,7 @@ static void udi_msc_cbw_wait(void);
*
* \param status UDD_EP_TRANSFER_OK, if transfer is finished
* \param status UDD_EP_TRANSFER_ABORT, if transfer is aborted
* \param nb_received number of data transfered
* \param nb_received number of data transferred
*/
static void udi_msc_cbw_received(udd_ep_status_t status,
iram_size_t nb_received, udd_ep_id_t ep);
@@ -211,7 +211,7 @@ static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size);
*
* \param status UDD_EP_TRANSFER_OK, if transfer finish
* \param status UDD_EP_TRANSFER_ABORT, if transfer aborted
* \param nb_sent number of data transfered
* \param nb_sent number of data transferred
*/
static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
udd_ep_id_t ep);
@@ -244,7 +244,7 @@ void udi_msc_csw_send(void);
*
* \param status UDD_EP_TRANSFER_OK, if transfer is finished
* \param status UDD_EP_TRANSFER_ABORT, if transfer is aborted
* \param nb_sent number of data transfered
* \param nb_sent number of data transferred
*/
static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
udd_ep_id_t ep);
@@ -463,7 +463,7 @@ uint8_t udi_msc_getsetting(void)
static void udi_msc_cbw_invalid(void)
{
if (!udi_msc_b_cbw_invalid)
return; // Don't re-stall endpoint if error reseted by setup
return; // Don't re-stall endpoint if error reset by setup
udd_ep_set_halt(UDI_MSC_EP_OUT);
// If stall cleared then re-stall it. Only Setup MSC Reset can clear it
udd_ep_wait_stall_clear(UDI_MSC_EP_OUT, udi_msc_cbw_invalid);
@@ -472,7 +472,7 @@ static void udi_msc_cbw_invalid(void)
static void udi_msc_csw_invalid(void)
{
if (!udi_msc_b_cbw_invalid)
return; // Don't re-stall endpoint if error reseted by setup
return; // Don't re-stall endpoint if error reset by setup
udd_ep_set_halt(UDI_MSC_EP_IN);
// If stall cleared then re-stall it. Only Setup MSC Reset can clear it
udd_ep_wait_stall_clear(UDI_MSC_EP_IN, udi_msc_csw_invalid);

4
Marlin/src/HAL/DUE/usb/udi_msc.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDI_MSC_H_
@@ -290,7 +290,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* another "Composite Device" module, like "USB HID Mouse (Composite Device)".
*
* Also, you can refer to application note
* <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* AVR4902 ASF - USB Composite Device</A>.
*
* \section udi_msc_use_case_composite_setup Setup steps

48
Marlin/src/HAL/DUE/usb/uotghs_device_due.c Executable file → Normal file
View File

@@ -42,7 +42,7 @@
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM
@@ -325,7 +325,7 @@ static void udd_sleep_mode(bool b_idle)
/**
* \name Control endpoint low level management routine.
*
* This function performs control endpoint mangement.
* This function performs control endpoint management.
* It handle the SETUP/DATA/HANDSHAKE phases of a control transaction.
*/
//@{
@@ -397,9 +397,9 @@ static void udd_ctrl_endofrequest(void);
/**
* \brief Main interrupt routine for control endpoint
*
* This switchs control endpoint events to correct sub function.
* This switches control endpoint events to correct sub function.
*
* \return \c 1 if an event about control endpoint is occured, otherwise \c 0.
* \return \c 1 if an event about control endpoint is occurred, otherwise \c 0.
*/
static bool udd_ctrl_interrupt(void);
@@ -410,7 +410,7 @@ static bool udd_ctrl_interrupt(void);
* \name Management of bulk/interrupt/isochronous endpoints
*
* The UDD manages the data transfer on endpoints:
* - Start data tranfer on endpoint with USB Device DMA
* - Start data transfer on endpoint with USB Device DMA
* - Send a ZLP packet if requested
* - Call callback registered to signal end of transfer
* The transfer abort and stall feature are supported.
@@ -431,7 +431,7 @@ typedef struct {
uint8_t *buf;
//! Size of buffer to send or fill
iram_size_t buf_size;
//!< Size of data transfered
//!< Size of data transferred
iram_size_t buf_cnt;
//!< Size of data loaded (or prepared for DMA) last time
iram_size_t buf_load;
@@ -486,7 +486,7 @@ static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_n
#ifdef UDD_EP_DMA_SUPPORTED
/**
* \brief Start the next transfer if necessary or complet the job associated.
* \brief Start the next transfer if necessary or complete the job associated.
*
* \param ep endpoint number without direction flag
*/
@@ -496,9 +496,9 @@ static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_n
/**
* \brief Main interrupt routine for bulk/interrupt/isochronous endpoints
*
* This switchs endpoint events to correct sub function.
* This switches endpoint events to correct sub function.
*
* \return \c 1 if an event about bulk/interrupt/isochronous endpoints has occured, otherwise \c 0.
* \return \c 1 if an event about bulk/interrupt/isochronous endpoints has occurred, otherwise \c 0.
*/
static bool udd_ep_interrupt(void);
@@ -520,7 +520,7 @@ static bool udd_ep_interrupt(void);
*
* Note:
* Here, the global interrupt mask is not clear when an USB interrupt is enabled
* because this one can not be occured during the USB ISR (=during INTX is masked).
* because this one can not be occurred during the USB ISR (=during INTX is masked).
* See Technical reference $3.8.3 Masking interrupt requests in peripheral modules.
*/
#ifdef UHD_ENABLE
@@ -787,7 +787,7 @@ void udd_attach(void)
udd_sleep_mode(true);
otg_unfreeze_clock();
// This section of clock check can be improved with a chek of
// This section of clock check can be improved with a check of
// USB clock source via sysclk()
// Check USB clock because the source can be a PLL
while (!Is_otg_clock_usable());
@@ -803,7 +803,7 @@ void udd_attach(void)
#ifdef USB_DEVICE_HS_SUPPORT
udd_enable_msof_interrupt();
#endif
// Reset following interupts flag
// Reset following interrupts flag
udd_ack_reset();
udd_ack_sof();
udd_ack_msof();
@@ -902,7 +902,7 @@ bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
}
dbg_print("alloc(%x, %d) ", ep, MaxEndpointSize);
// Bank choise
// Bank choice
switch (bmAttributes & USB_EP_TYPE_MASK) {
case USB_EP_TYPE_ISOCHRONOUS:
nb_bank = UDD_ISOCHRONOUS_NB_BANK(ep);
@@ -1228,7 +1228,7 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
if (Is_udd_endpoint_stall_requested(ep)
|| ptr_job->stall_requested) {
// Endpoint halted then registes the callback
// Endpoint halted then registers the callback
ptr_job->busy = true;
ptr_job->call_nohalt = callback;
} else {
@@ -1386,7 +1386,7 @@ static void udd_ctrl_setup_received(void)
// Decode setup request
if (udc_process_setup() == false) {
// Setup request unknow then stall it
// Setup request unknown then stall it
udd_ctrl_stall_data();
udd_ack_setup_received(0);
return;
@@ -1447,7 +1447,7 @@ static void udd_ctrl_in_sent(void)
udd_ctrl_prev_payload_buf_cnt += udd_ctrl_payload_buf_cnt;
if ((udd_g_ctrlreq.req.wLength == udd_ctrl_prev_payload_buf_cnt)
|| b_shortpacket) {
// All data requested are transfered or a short packet has been sent
// All data requested are transferred or a short packet has been sent
// then it is the end of data phase.
// Generate an OUT ZLP for handshake phase.
udd_ctrl_send_zlp_out();
@@ -1516,7 +1516,7 @@ static void udd_ctrl_out_received(void)
// End of SETUP request:
// - Data IN Phase aborted,
// - or last Data IN Phase hidden by ZLP OUT sending quiclky,
// - or ZLP OUT received normaly.
// - or ZLP OUT received normally.
udd_ctrl_endofrequest();
} else {
// Protocol error during SETUP request
@@ -1544,7 +1544,7 @@ static void udd_ctrl_out_received(void)
(udd_ctrl_prev_payload_buf_cnt +
udd_ctrl_payload_buf_cnt))) {
// End of reception because it is a short packet
// Before send ZLP, call intermediat calback
// Before send ZLP, call intermediate callback
// in case of data receiv generate a stall
udd_g_ctrlreq.payload_size = udd_ctrl_payload_buf_cnt;
if (NULL != udd_g_ctrlreq.over_under_run) {
@@ -1565,7 +1565,7 @@ static void udd_ctrl_out_received(void)
if (udd_g_ctrlreq.payload_size == udd_ctrl_payload_buf_cnt) {
// Overrun then request a new payload buffer
if (!udd_g_ctrlreq.over_under_run) {
// No callback availabled to request a new payload buffer
// No callback available to request a new payload buffer
udd_ctrl_stall_data();
// Ack reception of OUT to replace NAK by a STALL
udd_ack_out_received(0);
@@ -1805,7 +1805,7 @@ static void udd_ep_trans_done(udd_ep_id_t ep)
// transfer size of UDD_ENDPOINT_MAX_TRANS Bytes
next_trans = UDD_ENDPOINT_MAX_TRANS;
// Set 0 to tranfer the maximum
// Set 0 to transfer the maximum
udd_dma_ctrl = UOTGHS_DEVDMACONTROL_BUFF_LENGTH(0);
} else {
udd_dma_ctrl = UOTGHS_DEVDMACONTROL_BUFF_LENGTH(next_trans);
@@ -1850,7 +1850,7 @@ static void udd_ep_trans_done(udd_ep_id_t ep)
}
cpu_irq_restore(flags);
// Here a ZLP has been recieved
// Here a ZLP has been received
// and the DMA transfer must be not started.
// It is the end of transfer
ptr_job->buf_size = ptr_job->buf_cnt;
@@ -1991,13 +1991,13 @@ static bool udd_ep_interrupt(void)
}
dbg_print("dma%x: ", ep);
udd_disable_endpoint_dma_interrupt(ep);
// Save number of data no transfered
// Save number of data no transferred
nb_remaining = (udd_endpoint_dma_get_status(ep) &
UOTGHS_DEVDMASTATUS_BUFF_COUNT_Msk)
>> UOTGHS_DEVDMASTATUS_BUFF_COUNT_Pos;
if (nb_remaining) {
// Transfer no complete (short packet or ZLP) then:
// Update number of data transfered
// Update number of data transferred
ptr_job->buf_cnt -= nb_remaining;
// Set transfer complete to stop the transfer
ptr_job->buf_size = ptr_job->buf_cnt;
@@ -2056,7 +2056,7 @@ static bool udd_ep_interrupt(void)
udd_disable_endpoint_interrupt(ep);
Assert(ptr_job->stall_requested);
// A stall has been requested during backgound transfer
// A stall has been requested during background transfer
ptr_job->stall_requested = false;
udd_disable_endpoint_bank_autoswitch(ep);
udd_enable_stall_handshake(ep);

2
Marlin/src/HAL/DUE/usb/uotghs_device_due.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef UOTGHS_DEVICE_DUE_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/uotghs_otg.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef UOTGHS_OTG_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/usb_protocol.h Executable file → Normal file
View File

@@ -44,7 +44,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _USB_PROTOCOL_H_

2
Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _USB_PROTOCOL_CDC_H_
#define _USB_PROTOCOL_CDC_H_

4
Marlin/src/HAL/DUE/usb/usb_protocol_msc.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _USB_PROTOCOL_MSC_H_
@@ -130,7 +130,7 @@ struct usb_msc_cbw {
struct usb_msc_csw {
le32_t dCSWSignature; //!< Must contain 'USBS'
le32_t dCSWTag; //!< Same as dCBWTag
le32_t dCSWDataResidue; //!< Number of bytes not transfered
le32_t dCSWDataResidue; //!< Number of bytes not transferred
uint8_t bCSWStatus; //!< Status code
};

6
Marlin/src/HAL/DUE/usb/usb_task.c Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
// Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
// Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
#ifdef ARDUINO_ARCH_SAM
@@ -264,7 +264,7 @@ bool usb_task_extra_string(void) {
** Handle device requests that the ASF stack doesn't
*/
bool usb_task_other_requests(void) {
uint8_t* ptr = 0;
uint8_t *ptr = 0;
uint16_t size = 0;
if (Udd_setup_type() == USB_REQ_TYPE_VENDOR) {
@@ -322,7 +322,7 @@ void usb_task_init(void) {
char *sptr;
// Patch in the filament diameter
sprintf_P(diam, PSTR("%d"), (int)((DEFAULT_NOMINAL_FILAMENT_DIA) * 1000.0));
itoa((int)((DEFAULT_NOMINAL_FILAMENT_DIA) * 1000), diam, 10);
// And copy it to the proper place, expanding it to unicode
sptr = &diam[0];

2
Marlin/src/HAL/DUE/usb/usb_task.h Executable file → Normal file
View File

@@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _USB_TASK_H_

5
Marlin/src/HAL/DUE/watchdog.cpp Executable file → Normal file
View File

@@ -16,10 +16,9 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfig.h"
@@ -37,7 +36,7 @@ void watchdogSetup() {
#if ENABLED(USE_WATCHDOG)
// 4 seconds timeout
uint32_t timeout = 4000;
uint32_t timeout = TERN(WATCHDOG_DURATION_8S, 8000, 4000);
// Calculate timeout value in WDT counter ticks: This assumes
// the slow clock is running at 32.768 kHz watchdog

2
Marlin/src/HAL/DUE/watchdog.h Executable file → Normal file
View File

@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once