update code base to Marlin 2.0.9.2

Marlin/src/HAL/LINUX/HAL.cpp

@@ -16,30 +16,24 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include "../../inc/MarlinConfig.h"
 #include "../shared/Delay.h"
 
-HalSerial usb_serial;
+MSerialT usb_serial(TERN0(EMERGENCY_PARSER, true));
 
 // U8glib required functions
-extern "C" void u8g_xMicroDelay(uint16_t val) {
-  DELAY_US(val);
-}
-extern "C" void u8g_MicroDelay() {
-  u8g_xMicroDelay(1);
-}
-extern "C" void u8g_10MicroDelay() {
-  u8g_xMicroDelay(10);
-}
-extern "C" void u8g_Delay(uint16_t val) {
-  delay(val);
+extern "C" {
+  void u8g_xMicroDelay(uint16_t val) { DELAY_US(val); }
+  void u8g_MicroDelay()              { u8g_xMicroDelay(1); }
+  void u8g_10MicroDelay()            { u8g_xMicroDelay(10); }
+  void u8g_Delay(uint16_t val)       { delay(val); }
 }
+
 //************************//
 
 // return free heap space
@@ -79,4 +73,6 @@ void HAL_pwm_init() {
 
 }
 
+void HAL_reboot() { /* Reset the application state and GPIO */ }
+
 #endif // __PLAT_LINUX__

Marlin/src/HAL/LINUX/HAL.h

@@ -16,14 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 #define CPU_32_BIT
 
-#define F_CPU 100000000
+#define F_CPU 100000000UL
 #define SystemCoreClock F_CPU
 #include <iostream>
 #include <stdint.h>
@@ -56,18 +56,16 @@ uint8_t _getc();
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
 #include "watchdog.h"
-#include "timers.h"
 #include "serial.h"
 
 #define SHARED_SERVOS HAS_SERVOS
 
-extern HalSerial usb_serial;
-#define MYSERIAL0 usb_serial
-#define NUM_SERIAL 1
+extern MSerialT usb_serial;
+#define MYSERIAL1 usb_serial
 
-#define ST7920_DELAY_1 DELAY_NS(600)
-#define ST7920_DELAY_2 DELAY_NS(750)
-#define ST7920_DELAY_3 DELAY_NS(750)
+#define CPU_ST7920_DELAY_1 600
+#define CPU_ST7920_DELAY_2 750
+#define CPU_ST7920_DELAY_3 750
 
 //
 // Interrupts
@@ -81,15 +79,22 @@ extern HalSerial usb_serial;
 inline void HAL_init() {}
 
 // Utility functions
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 // ADC
+#define HAL_ADC_VREF           5.0
+#define HAL_ADC_RESOLUTION    10
 #define HAL_ANALOG_SELECT(ch) HAL_adc_enable_channel(ch)
 #define HAL_START_ADC(ch)     HAL_adc_start_conversion(ch)
-#define HAL_ADC_RESOLUTION    10
 #define HAL_READ_ADC()        HAL_adc_get_result()
 #define HAL_ADC_READY()       true
 
@@ -102,6 +107,8 @@ uint16_t HAL_adc_get_result();
 inline void HAL_clear_reset_source(void) {}
 inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; }
 
+void HAL_reboot(); // Reset the application state and GPIO
+
 /* ---------------- Delay in cycles */
 FORCE_INLINE static void DELAY_CYCLES(uint64_t x) {
   Clock::delayCycles(x);

Marlin/src/HAL/LINUX/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/LINUX/arduino.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include <iostream>
@@ -76,20 +75,6 @@ uint16_t analogRead(pin_t adc_pin) {
   return Gpio::get(DIGITAL_PIN_TO_ANALOG_PIN(adc_pin));
 }
 
-// **************************
-// Persistent Config Storage
-// **************************
-
-void eeprom_write_byte(unsigned char *pos, unsigned char value) {
-
-}
-
-unsigned char eeprom_read_byte(uint8_t * pos) { return '\0'; }
-
-void eeprom_read_block(void *__dst, const void *__src, size_t __n) { }
-
-void eeprom_update_block(const void *__src, void *__dst, size_t __n) { }
-
 char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s) {
   char format_string[20];
   snprintf(format_string, 20, "%%%d.%df", __width, __prec);

Marlin/src/HAL/LINUX/eeprom.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include "../../inc/MarlinConfig.h"
@@ -29,20 +28,25 @@
 #include "../shared/eeprom_api.h"
 #include <stdio.h>
 
-#define LINUX_EEPROM_SIZE (E2END + 1)
-uint8_t buffer[LINUX_EEPROM_SIZE];
+#ifndef MARLIN_EEPROM_SIZE
+  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB of Emulated EEPROM
+#endif
+
+uint8_t buffer[MARLIN_EEPROM_SIZE];
 char filename[] = "eeprom.dat";
 
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+
 bool PersistentStore::access_start() {
   const char eeprom_erase_value = 0xFF;
   FILE * eeprom_file = fopen(filename, "rb");
-  if (eeprom_file == nullptr) return false;
+  if (!eeprom_file) return false;
 
   fseek(eeprom_file, 0L, SEEK_END);
   std::size_t file_size = ftell(eeprom_file);
 
-  if (file_size < LINUX_EEPROM_SIZE) {
-    memset(buffer + file_size, eeprom_erase_value, LINUX_EEPROM_SIZE - file_size);
+  if (file_size < MARLIN_EEPROM_SIZE) {
+    memset(buffer + file_size, eeprom_erase_value, MARLIN_EEPROM_SIZE - file_size);
   }
   else {
     fseek(eeprom_file, 0L, SEEK_SET);
@@ -55,7 +59,7 @@ bool PersistentStore::access_start() {
 
 bool PersistentStore::access_finish() {
   FILE * eeprom_file = fopen(filename, "wb");
-  if (eeprom_file == nullptr) return false;
+  if (!eeprom_file) return false;
   fwrite(buffer, sizeof(uint8_t), sizeof(buffer), eeprom_file);
   fclose(eeprom_file);
   return true;
@@ -74,7 +78,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   return (bytes_written != size);  // return true for any error
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
   std::size_t bytes_read = 0;
   if (writing) {
     for (std::size_t i = 0; i < size; i++) {
@@ -96,7 +100,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uin
   return bytes_read != size;  // return true for any error
 }
 
-size_t PersistentStore::capacity() { return 4096; } // 4KiB of Emulated EEPROM
-
 #endif // EEPROM_SETTINGS
 #endif // __PLAT_LINUX__

Marlin/src/HAL/LINUX/fastio.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -44,7 +44,7 @@
  *
  * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
  */
 
 /// Read a pin

Marlin/src/HAL/LINUX/hardware/Clock.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include "../../../inc/MarlinConfig.h"

Marlin/src/HAL/LINUX/hardware/Clock.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/LINUX/hardware/Gpio.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include "Gpio.h"

Marlin/src/HAL/LINUX/hardware/Gpio.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -40,7 +40,7 @@ struct GpioEvent {
   pin_type pin_id;
   GpioEvent::Type event;
 
-  GpioEvent(uint64_t timestamp, pin_type pin_id, GpioEvent::Type event){
+  GpioEvent(uint64_t timestamp, pin_type pin_id, GpioEvent::Type event) {
     this->timestamp = timestamp;
     this->pin_id = pin_id;
     this->event = event;
@@ -86,10 +86,10 @@ public:
     GpioEvent::Type evt_type = value > 1 ? GpioEvent::SET_VALUE : value > pin_map[pin].value ? GpioEvent::RISE : value < pin_map[pin].value ? GpioEvent::FALL : GpioEvent::NOP;
     pin_map[pin].value = value;
     GpioEvent evt(Clock::nanos(), pin, evt_type);
-    if (pin_map[pin].cb != nullptr) {
+    if (pin_map[pin].cb) {
       pin_map[pin].cb->interrupt(evt);
     }
-    if (Gpio::logger != nullptr) Gpio::logger->log(evt);
+    if (Gpio::logger) Gpio::logger->log(evt);
   }
 
   static uint16_t get(pin_type pin) {
@@ -105,8 +105,8 @@ public:
     if (!valid_pin(pin)) return;
     pin_map[pin].mode = value;
     GpioEvent evt(Clock::nanos(), pin, GpioEvent::Type::SETM);
-    if (pin_map[pin].cb != nullptr) pin_map[pin].cb->interrupt(evt);
-    if (Gpio::logger != nullptr) Gpio::logger->log(evt);
+    if (pin_map[pin].cb) pin_map[pin].cb->interrupt(evt);
+    if (Gpio::logger) Gpio::logger->log(evt);
   }
 
   static uint8_t getMode(pin_type pin) {
@@ -118,8 +118,8 @@ public:
     if (!valid_pin(pin)) return;
     pin_map[pin].dir = value;
     GpioEvent evt(Clock::nanos(), pin, GpioEvent::Type::SETD);
-    if (pin_map[pin].cb != nullptr) pin_map[pin].cb->interrupt(evt);
-    if (Gpio::logger != nullptr) Gpio::logger->log(evt);
+    if (pin_map[pin].cb) pin_map[pin].cb->interrupt(evt);
+    if (Gpio::logger) Gpio::logger->log(evt);
   }
 
   static uint8_t getDir(pin_type pin) {

Marlin/src/HAL/LINUX/hardware/Heater.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include "Clock.h"
@@ -55,7 +54,7 @@ void Heater::update() {
 }
 
 void Heater::interrupt(GpioEvent ev) {
-  // ununsed
+  // unused
 }
 
 #endif // __PLAT_LINUX__

Marlin/src/HAL/LINUX/hardware/Heater.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/LINUX/hardware/IOLoggerCSV.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include "IOLoggerCSV.h"

Marlin/src/HAL/LINUX/hardware/IOLoggerCSV.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/LINUX/hardware/LinearAxis.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include <random>
@@ -52,7 +51,7 @@ void LinearAxis::update() {
 }
 
 void LinearAxis::interrupt(GpioEvent ev) {
-  if (ev.pin_id == step_pin && !Gpio::pin_map[enable_pin].value){
+  if (ev.pin_id == step_pin && !Gpio::pin_map[enable_pin].value) {
     if (ev.event == GpioEvent::RISE) {
       last_update = ev.timestamp;
       position += -1 + 2 * Gpio::pin_map[dir_pin].value;

Marlin/src/HAL/LINUX/hardware/LinearAxis.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/LINUX/hardware/Timer.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include "Timer.h"

Marlin/src/HAL/LINUX/hardware/Timer.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -52,7 +52,7 @@ public:
     return (*(intptr_t*)timerid);
   }
 
-  static void handler(int sig, siginfo_t *si, void *uc){
+  static void handler(int sig, siginfo_t *si, void *uc) {
     Timer* _this = (Timer*)si->si_value.sival_ptr;
     _this->avg_error += (Clock::nanos() - _this->start_time) - _this->period; //high_resolution_clock is also limited in precision, but best we have
     _this->avg_error /= 2; //very crude precision analysis (actually within +-500ns usually)

Marlin/src/HAL/LINUX/inc/Conditionals_LCD.h

@@ -16,7 +16,11 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
+
+#if HAS_SPI_TFT || HAS_FSMC_TFT
+  #error "Sorry! TFT displays are not available for HAL/LINUX."
+#endif

Marlin/src/HAL/LINUX/inc/Conditionals_adv.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/LINUX/inc/Conditionals_post.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/LINUX/inc/SanityCheck.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -26,14 +26,18 @@
  */
 
 // Emulating RAMPS
-#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
+#if ENABLED(SPINDLE_LASER_USE_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
   #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
 #endif
 
-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on LINUX."
 #endif
 
 #if HAS_TMC_SW_SERIAL
-  #error "TMC220x Software Serial is not supported on this platform."
+  #error "TMC220x Software Serial is not supported on LINUX."
+#endif
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+  #error "POSTMORTEM_DEBUGGING is not yet supported on LINUX."
 #endif

Marlin/src/HAL/LINUX/include/Arduino.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -67,34 +67,14 @@ void cli(); // Disable
 void sei(); // Enable
 void attachInterrupt(uint32_t pin, void (*callback)(), uint32_t mode);
 void detachInterrupt(uint32_t pin);
-extern "C" void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode);
-extern "C" void GpioDisableInt(uint32_t port, uint32_t pin);
 
-// Program Memory
-#define pgm_read_ptr(addr)        (*((void**)(addr)))
-#define pgm_read_byte_near(addr)  (*((uint8_t*)(addr)))
-#define pgm_read_float_near(addr) (*((float*)(addr)))
-#define pgm_read_word_near(addr)  (*((uint16_t*)(addr)))
-#define pgm_read_dword_near(addr) (*((uint32_t*)(addr)))
-#define pgm_read_byte(addr)       pgm_read_byte_near(addr)
-#define pgm_read_float(addr)      pgm_read_float_near(addr)
-#define pgm_read_word(addr)       pgm_read_word_near(addr)
-#define pgm_read_dword(addr)      pgm_read_dword_near(addr)
-
-using std::memcpy;
-#define memcpy_P memcpy
-#define sprintf_P sprintf
-#define strstr_P strstr
-#define strncpy_P strncpy
-#define vsnprintf_P vsnprintf
-#define strcpy_P strcpy
-#define snprintf_P snprintf
-#define strlen_P strlen
+extern "C" {
+  void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode);
+  void GpioDisableInt(uint32_t port, uint32_t pin);
+}
 
 // Time functions
-extern "C" {
-  void delay(const int milis);
-}
+extern "C" void delay(const int milis);
 void _delay_ms(const int delay);
 void delayMicroseconds(unsigned long);
 uint32_t millis();
@@ -106,12 +86,6 @@ bool digitalRead(pin_t);
 void analogWrite(pin_t, int);
 uint16_t analogRead(pin_t);
 
-// EEPROM
-void eeprom_write_byte(unsigned char *pos, unsigned char value);
-unsigned char eeprom_read_byte(unsigned char *pos);
-void eeprom_read_block(void *__dst, const void *__src, size_t __n);
-void eeprom_update_block(const void *__src, void *__dst, size_t __n);
-
 int32_t random(int32_t);
 int32_t random(int32_t, int32_t);
 void randomSeed(uint32_t);

Marlin/src/HAL/LINUX/include/pinmapping.cpp

@@ -16,53 +16,15 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include <pinmapping.h>
 
 #include "../../../gcode/parser.h"
 
-uint8_t analog_offset = NUM_DIGITAL_PINS - NUM_ANALOG_INPUTS;
-
-// Get the digital pin for an analog index
-pin_t analogInputToDigitalPin(const int8_t p) {
-  return (WITHIN(p, 0, NUM_ANALOG_INPUTS) ? analog_offset + p : P_NC);
-}
-
-// Return the index of a pin number
-int16_t GET_PIN_MAP_INDEX(const pin_t pin) {
-  return pin;
-}
-
-// Test whether the pin is valid
-bool VALID_PIN(const pin_t p) {
-  return WITHIN(p, 0, NUM_DIGITAL_PINS);
-}
-
-// Get the analog index for a digital pin
-int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t p) {
-  return (WITHIN(p, analog_offset, NUM_DIGITAL_PINS) ? p - analog_offset : P_NC);
-}
-
-// Test whether the pin is PWM
-bool PWM_PIN(const pin_t p) {
-  return false;
-}
-
-// Test whether the pin is interruptable
-bool INTERRUPT_PIN(const pin_t p) {
-  return false;
-}
-
-// Get the pin number at the given index
-pin_t GET_PIN_MAP_PIN(const int16_t ind) {
-  return ind;
-}
-
 int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) {
   return parser.intval(code, dval);
 }

Marlin/src/HAL/LINUX/include/pinmapping.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -34,26 +34,32 @@ constexpr uint8_t NUM_ANALOG_INPUTS = 16;
 
 #define HAL_SENSITIVE_PINS
 
+constexpr uint8_t analog_offset = NUM_DIGITAL_PINS - NUM_ANALOG_INPUTS;
+
 // Get the digital pin for an analog index
-pin_t analogInputToDigitalPin(const int8_t p);
-
-// Return the index of a pin number
-int16_t GET_PIN_MAP_INDEX(const pin_t pin);
-
-// Test whether the pin is valid
-bool VALID_PIN(const pin_t p);
+constexpr pin_t analogInputToDigitalPin(const int8_t p) {
+  return (WITHIN(p, 0, NUM_ANALOG_INPUTS) ? analog_offset + p : P_NC);
+}
 
 // Get the analog index for a digital pin
-int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t p);
+constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t p) {
+  return (WITHIN(p, analog_offset, NUM_DIGITAL_PINS) ? p - analog_offset : P_NC);
+}
+
+// Return the index of a pin number
+constexpr int16_t GET_PIN_MAP_INDEX(const pin_t pin) { return pin; }
+
+// Test whether the pin is valid
+constexpr bool VALID_PIN(const pin_t p) { return WITHIN(p, 0, NUM_DIGITAL_PINS); }
 
 // Test whether the pin is PWM
-bool PWM_PIN(const pin_t p);
+constexpr bool PWM_PIN(const pin_t p) { return false; }
 
-// Test whether the pin is interruptable
-bool INTERRUPT_PIN(const pin_t p);
+// Test whether the pin is interruptible
+constexpr bool INTERRUPT_PIN(const pin_t p) { return false; }
 
 // Get the pin number at the given index
-pin_t GET_PIN_MAP_PIN(const int16_t ind);
+constexpr pin_t GET_PIN_MAP_PIN(const int16_t ind) { return ind; }
 
 // Parse a G-code word into a pin index
 int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);

Marlin/src/HAL/LINUX/include/serial.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -25,6 +25,7 @@
 #if ENABLED(EMERGENCY_PARSER)
   #include "../../../feature/e_parser.h"
 #endif
+#include "../../../core/serial_hook.h"
 
 #include <stdarg.h>
 #include <stdio.h>
@@ -33,7 +34,6 @@
  * Generic RingBuffer
  * T type of the buffer array
  * S size of the buffer (must be power of 2)
- *
  */
 template <typename T, uint32_t S> class RingBuffer {
 public:
@@ -74,18 +74,11 @@ private:
   volatile uint32_t index_read;
 };
 
-class HalSerial {
-public:
-
-  #if ENABLED(EMERGENCY_PARSER)
-    EmergencyParser::State emergency_state;
-  #endif
-
+struct HalSerial {
   HalSerial() { host_connected = true; }
 
   void begin(int32_t) {}
-
-  void end() {}
+  void end()          {}
 
   int peek() {
     uint8_t value;
@@ -100,7 +93,7 @@ public:
     return transmit_buffer.write(c);
   }
 
-  operator bool() { return host_connected; }
+  bool connected() { return host_connected; }
 
   uint16_t available() {
     return (uint16_t)receive_buffer.available();
@@ -117,92 +110,9 @@ public:
       while (transmit_buffer.available()) { /* nada */ }
   }
 
-  void printf(const char *format, ...) {
-    static char buffer[256];
-    va_list vArgs;
-    va_start(vArgs, format);
-    int length = vsnprintf((char *) buffer, 256, (char const *) format, vArgs);
-    va_end(vArgs);
-    if (length > 0 && length < 256) {
-      if (host_connected) {
-        for (int i = 0; i < length;) {
-          if (transmit_buffer.write(buffer[i])) {
-            ++i;
-          }
-        }
-      }
-    }
-  }
-
-  #define DEC 10
-  #define HEX 16
-  #define OCT 8
-  #define BIN 2
-
-  void print_bin(uint32_t value, uint8_t num_digits) {
-    uint32_t mask = 1 << (num_digits -1);
-    for (uint8_t i = 0; i < num_digits; i++) {
-      if (!(i %  4) && i) write(' ');
-      if (!(i % 16) && i) write(' ');
-      if (value & mask)   write('1');
-      else                write('0');
-      value <<= 1;
-    }
-  }
-
-  void print(const char value[]) { printf("%s" , value); }
-  void print(char value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 8);
-    else if (nbase == OCT) printf("%3o", value);
-    else if (nbase == HEX) printf("%2X", value);
-    else if (nbase == DEC ) printf("%d", value);
-    else printf("%c" , value);
-  }
-  void print(unsigned char value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 8);
-    else if (nbase == OCT) printf("%3o", value);
-    else if (nbase == HEX) printf("%2X", value);
-    else printf("%u" , value);
-  }
-  void print(int value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 16);
-    else if (nbase == OCT) printf("%6o", value);
-    else if (nbase == HEX) printf("%4X", value);
-    else printf("%d", value);
-  }
-  void print(unsigned int value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 16);
-    else if (nbase == OCT) printf("%6o", value);
-    else if (nbase == HEX) printf("%4X", value);
-    else printf("%u" , value);
-  }
-  void print(long value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 32);
-    else if (nbase == OCT) printf("%11o", value);
-    else if (nbase == HEX) printf("%8X", value);
-    else printf("%ld" , value);
-  }
-  void print(unsigned long value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 32);
-    else if (nbase == OCT) printf("%11o", value);
-    else if (nbase == HEX) printf("%8X", value);
-    else printf("%lu" , value);
-  }
-  void print(float value, int round = 6)  { printf("%f" , value); }
-  void print(double value, int round = 6) { printf("%f" , value); }
-
-  void println(const char value[]) { printf("%s\n" , value); }
-  void println(char value, int nbase = 0) { print(value, nbase); println(); }
-  void println(unsigned char value, int nbase = 0) { print(value, nbase); println(); }
-  void println(int value, int nbase = 0) { print(value, nbase); println(); }
-  void println(unsigned int value, int nbase = 0) { print(value, nbase); println(); }
-  void println(long value, int nbase = 0) { print(value, nbase); println(); }
-  void println(unsigned long value, int nbase = 0) { print(value, nbase); println(); }
-  void println(float value, int round = 6) { printf("%f\n" , value); }
-  void println(double value, int round = 6) { printf("%f\n" , value); }
-  void println() { print('\n'); }
-
   volatile RingBuffer<uint8_t, 128> receive_buffer;
   volatile RingBuffer<uint8_t, 128> transmit_buffer;
   volatile bool host_connected;
 };
+
+typedef Serial1Class<HalSerial> MSerialT;

Marlin/src/HAL/LINUX/main.cpp

@@ -1,8 +1,10 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -14,28 +16,29 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
 #ifdef __PLAT_LINUX__
 
-extern void setup();
-extern void loop();
-
-#include <thread>
-
-#include <iostream>
-#include <fstream>
+//#define GPIO_LOGGING // Full GPIO and Positional Logging
 
 #include "../../inc/MarlinConfig.h"
-#include <stdio.h>
-#include <stdarg.h>
 #include "../shared/Delay.h"
 #include "hardware/IOLoggerCSV.h"
 #include "hardware/Heater.h"
 #include "hardware/LinearAxis.h"
 
+#include <stdio.h>
+#include <stdarg.h>
+#include <thread>
+#include <iostream>
+#include <fstream>
+
+extern void setup();
+extern void loop();
+
 // simple stdout / stdin implementation for fake serial port
 void write_serial_thread() {
   for (;;) {
@@ -65,8 +68,6 @@ void simulation_loop() {
   LinearAxis z_axis(Z_ENABLE_PIN, Z_DIR_PIN, Z_STEP_PIN, Z_MIN_PIN, Z_MAX_PIN);
   LinearAxis extruder0(E0_ENABLE_PIN, E0_DIR_PIN, E0_STEP_PIN, P_NC, P_NC);
 
-  //#define GPIO_LOGGING // Full GPIO and Positional Logging
-
   #ifdef GPIO_LOGGING
     IOLoggerCSV logger("all_gpio_log.csv");
     Gpio::attachLogger(&logger);
@@ -89,7 +90,7 @@ void simulation_loop() {
 
     #ifdef GPIO_LOGGING
       if (x_axis.position != x || y_axis.position != y || z_axis.position != z) {
-        uint64_t update = MAX3(x_axis.last_update, y_axis.last_update, z_axis.last_update);
+        uint64_t update = _MAX(x_axis.last_update, y_axis.last_update, z_axis.last_update);
         position_log << update << ", " << x_axis.position << ", " << y_axis.position << ", " << z_axis.position << std::endl;
         position_log.flush();
         x = x_axis.position;
@@ -108,8 +109,8 @@ int main() {
   std::thread write_serial (write_serial_thread);
   std::thread read_serial (read_serial_thread);
 
-  #if NUM_SERIAL > 0
-    MYSERIAL0.begin(BAUDRATE);
+  #ifdef MYSERIAL1
+    MYSERIAL1.begin(BAUDRATE);
     SERIAL_ECHOLNPGM("x86_64 Initialized");
     SERIAL_FLUSHTX();
   #endif

Marlin/src/HAL/LINUX/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -13,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -26,15 +29,16 @@
  */
 
 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define pwm_details(pin) pin = pin    // do nothing  // print PWM details
-#define pwm_status(pin) false //Print a pin's PWM status. Return true if it's currently a PWM pin.
-#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
+#define pwm_details(pin)    NOOP          // (do nothing)
+#define pwm_status(pin)     false         // Print a pin's PWM status. Return true if it's currently a PWM pin.
+#define IS_ANALOG(P)        (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
 #define digitalRead_mod(p)  digitalRead(p)
 #define PRINT_PORT(p)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
+#define GET_ARRAY_PIN(p)    pin_array[p].pin
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
+#define PRINT_PIN(p)        do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
+#define MULTI_NAME_PAD  16 // space needed to be pretty if not first name assigned to a pin
 
 // active ADC function/mode/code values for PINSEL registers
 constexpr int8_t ADC_pin_mode(pin_t pin) {

Marlin/src/HAL/LINUX/servo_private.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -45,7 +45,6 @@
  *           Version 2 Copyright (c) 2009 Michael Margolis.  All right reserved.
  *
  * The only modification was to update/delete macros to match the LPC176x.
- *
  */
 
 #include <stdint.h>

Marlin/src/HAL/LINUX/spi_pins.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -24,31 +24,32 @@
 #include "../../core/macros.h"
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD && ENABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use
                             // spiBeginTransaction.
 #endif
 
-/** onboard SD card */
-//#define SCK_PIN           P0_07
-//#define MISO_PIN          P0_08
-//#define MOSI_PIN          P0_09
-//#define SS_PIN            P0_06
-/** external */
-#ifndef SCK_PIN
-  #define SCK_PIN           50
+// Onboard SD
+//#define SD_SCK_PIN     P0_07
+//#define SD_MISO_PIN    P0_08
+//#define SD_MOSI_PIN    P0_09
+//#define SD_SS_PIN      P0_06
+
+// External SD
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN        50
 #endif
-#ifndef MISO_PIN
-  #define MISO_PIN          51
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN       51
 #endif
-#ifndef MOSI_PIN
-  #define MOSI_PIN          52
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN       52
 #endif
-#ifndef SS_PIN
-  #define SS_PIN            53
+#ifndef SD_SS_PIN
+  #define SD_SS_PIN         53
 #endif
 #ifndef SDSS
-  #define SDSS              SS_PIN
+  #define SDSS       SD_SS_PIN
 #endif

Marlin/src/HAL/LINUX/timers.cpp

@@ -16,16 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include "hardware/Timer.h"
 
 #include "../../inc/MarlinConfig.h"
-#include "timers.h"
 
 /**
  * Use POSIX signals to attempt to emulate Interrupts

Marlin/src/HAL/LINUX/timers.h

@@ -15,7 +15,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -37,9 +37,15 @@ typedef uint32_t hal_timer_t;
 
 #define HAL_TIMER_RATE         ((SystemCoreClock) / 4)  // frequency of timers peripherals
 
-#define STEP_TIMER_NUM 0  // Timer Index for Stepper
-#define TEMP_TIMER_NUM 1  // Timer Index for Temperature
-#define PULSE_TIMER_NUM STEP_TIMER_NUM
+#ifndef STEP_TIMER_NUM
+  #define STEP_TIMER_NUM        0  // Timer Index for Stepper
+#endif
+#ifndef PULSE_TIMER_NUM
+  #define PULSE_TIMER_NUM       STEP_TIMER_NUM
+#endif
+#ifndef TEMP_TIMER_NUM
+  #define TEMP_TIMER_NUM        1  // Timer Index for Temperature
+#endif
 
 #define TEMP_TIMER_RATE        1000000
 #define TEMP_TIMER_FREQUENCY   1000 // temperature interrupt frequency
@@ -59,8 +65,12 @@ typedef uint32_t hal_timer_t;
 #define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
 #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
 
-#define HAL_STEP_TIMER_ISR()  extern "C" void TIMER0_IRQHandler()
-#define HAL_TEMP_TIMER_ISR()  extern "C" void TIMER1_IRQHandler()
+#ifndef HAL_STEP_TIMER_ISR
+  #define HAL_STEP_TIMER_ISR()  extern "C" void TIMER0_IRQHandler()
+#endif
+#ifndef HAL_TEMP_TIMER_ISR
+  #define HAL_TEMP_TIMER_ISR()  extern "C" void TIMER1_IRQHandler()
+#endif
 
 // PWM timer
 #define HAL_PWM_TIMER

Marlin/src/HAL/LINUX/watchdog.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __PLAT_LINUX__
 
 #include "../../inc/MarlinConfig.h"
@@ -28,6 +27,8 @@
 
 #include "watchdog.h"
 
+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
 void watchdog_init() {}
 void HAL_watchdog_refresh() {}
 

Marlin/src/HAL/LINUX/watchdog.h

@@ -16,12 +16,10 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
-#define WDT_TIMEOUT   4000000 // 4 second timeout
-
 void watchdog_init();
 void HAL_watchdog_refresh();