update code base to Marlin 2.0.9.2

Marlin/src/lcd/extui/dgus_reloaded/config/DGUS_Constants.h

@@ -0,0 +1,96 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "../../../../inc/MarlinConfigPre.h"
+
+#include "DGUS_Addr.h"
+
+static_assert((DGUS_LEVEL_GRID_SIZE == GRID_MAX_POINTS_X * GRID_MAX_POINTS_Y), "DGUS_LEVEL_GRID_SIZE incompatible with current mesh.");
+
+#ifndef DGUS_DEFAULT_VOLUME
+  #define DGUS_DEFAULT_VOLUME 50
+#endif
+
+#ifndef DGUS_DEFAULT_BRIGHTNESS
+  #define DGUS_DEFAULT_BRIGHTNESS 100
+#endif
+
+#ifndef DGUS_STATUS_EXPIRATION_MS
+  #define DGUS_STATUS_EXPIRATION_MS 30000
+#endif
+
+#ifndef DGUS_PRINT_BABYSTEP
+  #define DGUS_PRINT_BABYSTEP 0.01f
+#endif
+
+#ifndef DGUS_PLA_TEMP_HOTEND
+  #define DGUS_PLA_TEMP_HOTEND 200
+#endif
+
+#ifndef DGUS_PLA_TEMP_BED
+  #define DGUS_PLA_TEMP_BED 60
+#endif
+
+#ifndef DGUS_ABS_TEMP_HOTEND
+  #define DGUS_ABS_TEMP_HOTEND 240
+#endif
+
+#ifndef DGUS_ABS_TEMP_BED
+  #define DGUS_ABS_TEMP_BED 80
+#endif
+
+#ifndef DGUS_PETG_TEMP_HOTEND
+  #define DGUS_PETG_TEMP_HOTEND 240
+#endif
+
+#ifndef DGUS_PETG_TEMP_BED
+  #define DGUS_PETG_TEMP_BED 60
+#endif
+
+#ifndef DGUS_DEFAULT_FILAMENT_LEN
+  #define DGUS_DEFAULT_FILAMENT_LEN 10
+#endif
+
+#ifndef LEVEL_CORNERS_Z_HOP
+  #define LEVEL_CORNERS_Z_HOP 4.0
+#endif
+
+#ifndef LEVEL_CORNERS_HEIGHT
+  #define LEVEL_CORNERS_HEIGHT 0.0
+#endif
+
+static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration.");
+
+#ifndef DGUS_LEVEL_CENTER_X
+  #define DGUS_LEVEL_CENTER_X ((X_BED_SIZE) / 2)
+#endif
+
+#ifndef DGUS_LEVEL_CENTER_Y
+  #define DGUS_LEVEL_CENTER_Y ((Y_BED_SIZE) / 2)
+#endif
+
+#if ENABLED(BLTOUCH)
+  #ifndef DGUS_RESET_BLTOUCH
+    #define DGUS_RESET_BLTOUCH "M999\nM280P0S160"
+  #endif
+#endif