wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

update code base to Marlin 2.0.9.2

Browse Source
This commit is contained in:
Stefan Kalscheuer
2021-10-03 18:57:12 +02:00
parent b9d7ba838e
commit 7077da3591
2617 changed files with 332093 additions and 103438 deletions
Download Patch File Download Diff File Expand all files Collapse all files

137
Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h Executable file → Normal file
View File

@@ -16,25 +16,27 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifdef SKR_HAS_LPC1769
#ifndef MCU_LPC1769
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#include "env_validate.h"
// If you have the BigTreeTech driver expansion module, enable BTT_MOTOR_EXPANSION
// https://github.com/bigtreetech/BTT-Expansion-module/tree/master/BTT%20EXP-MOT
//#define BTT_MOTOR_EXPANSION
#if BOTH(HAS_WIRED_LCD, BTT_MOTOR_EXPANSION)
#if EITHER(CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY)
#define EXP_MOT_USE_EXP2_ONLY 1
#else
#error "You can't use both an LCD and a Motor Expansion Module on EXP1/EXP2 at the same time."
#endif
#elif !defined(MCU_LPC1768)
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
#if DISABLED(SDCARD_EEPROM_EMULATION)
#define FLASH_EEPROM_EMULATION
#endif
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// Steppers
@@ -63,8 +65,25 @@
#define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN
#endif
#if HOTENDS == 1 && TEMP_SENSOR_PROBE
#define TEMP_PROBE_PIN TEMP_1_PIN
#if HOTENDS == 1 && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
#if TEMP_SENSOR_PROBE
#define TEMP_PROBE_PIN TEMP_1_PIN
#elif TEMP_SENSOR_CHAMBER
#define TEMP_CHAMBER_PIN TEMP_1_PIN
#endif
#endif
// CS, MISO, MOSI, and SCK for MAX Thermocouple SPI
#if HAS_MAX_TC
//#define TEMP_0_CS_PIN P...
//#define TEMP_0_MISO_PIN P...
//#define TEMP_0_MOSI_PIN P...
//#define TEMP_0_SCK_PIN P...
//#define TEMP_1_CS_PIN P...
//#define TEMP_1_MISO_PIN P...
//#define TEMP_1_MOSI_PIN P...
//#define TEMP_1_SCK_PIN P...
#endif
//
@@ -73,7 +92,7 @@
#ifndef HEATER_0_PIN
#define HEATER_0_PIN P2_07
#endif
#if HOTENDS == 1
#if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL)
#ifndef FAN1_PIN
#define FAN1_PIN P2_04
#endif
@@ -92,26 +111,98 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if !defined(BEEPER_PIN) && HAS_WIRED_LCD && DISABLED(LCD_USE_I2C_BUZZER)
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#endif
//
// SD Support
//
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#ifndef SDCARD_CONNECTION
#if HAS_WIRED_LCD
#define SDCARD_CONNECTION LCD
#else
#define SDCARD_CONNECTION ONBOARD
#endif
#endif
#if SD_CONNECTION_IS(LCD) && ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS)
#error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS."
#endif
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SD_SCK_PIN P0_15
#define SD_MISO_PIN P0_17
#define SD_MOSI_PIN P0_18
#define SD_SS_PIN EXP2_07_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#define SD_SCK_PIN P0_07
#define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
#if ENABLED(BTT_MOTOR_EXPANSION)
/** ------ ------
* NC | 1 2 | GND NC | 1 2 | GND
* NC | 3 4 | M1EN M2EN | 3 4 | M3EN
* M1STP | 5 6 M1DIR M1RX | 5 6 M1DIAG
* M2DIR | 7 8 | M2STP M2RX | 7 8 | M2DIAG
* M3DIR | 9 10 | M3STP M3RX | 9 10 | M3DIAG
* ------ ------
* EXP2 EXP1
*
* NB In EXP_MOT_USE_EXP2_ONLY mode EXP1 is not used and M2EN and M3EN need to be jumpered to M1EN
*/
// M1 on Driver Expansion Module
#define E2_STEP_PIN EXP2_05_PIN
#define E2_DIR_PIN EXP2_06_PIN
#define E2_ENABLE_PIN EXP2_04_PIN
#if !EXP_MOT_USE_EXP2_ONLY
#define E2_DIAG_PIN EXP1_06_PIN
#define E2_CS_PIN EXP1_05_PIN
#if HAS_TMC_UART
#define E2_SERIAL_TX_PIN EXP1_05_PIN
#define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
#endif
#endif
// M2 on Driver Expansion Module
#define E3_STEP_PIN EXP2_08_PIN
#define E3_DIR_PIN EXP2_07_PIN
#if !EXP_MOT_USE_EXP2_ONLY
#define E3_ENABLE_PIN EXP1_03_PIN
#define E3_DIAG_PIN EXP1_08_PIN
#define E3_CS_PIN EXP1_07_PIN
#if HAS_TMC_UART
#define E3_SERIAL_TX_PIN EXP1_07_PIN
#define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
#endif
#else
#define E3_ENABLE_PIN EXP2_04_PIN
#endif
// M3 on Driver Expansion Module
#define E4_STEP_PIN EXP2_10_PIN
#define E4_DIR_PIN EXP2_09_PIN
#if !EXP_MOT_USE_EXP2_ONLY
#define E4_ENABLE_PIN EXP1_04_PIN
#define E4_DIAG_PIN EXP1_10_PIN
#define E4_CS_PIN EXP1_09_PIN
#if HAS_TMC_UART
#define E4_SERIAL_TX_PIN EXP1_09_PIN
#define E4_SERIAL_RX_PIN E4_SERIAL_TX_PIN
#endif
#else
#define E4_ENABLE_PIN EXP2_04_PIN
#endif
#endif // BTT_MOTOR_EXPANSION