Merge upstream changes from Marlin 2.1.2.2
This commit is contained in:
Stefan Kalscheuer
@@ -59,23 +59,23 @@
|
||||
|
||||
//! \name SCSI commands defined by SPC-2
|
||||
//@{
|
||||
#define SPC_TEST_UNIT_READY 0x00
|
||||
#define SPC_REQUEST_SENSE 0x03
|
||||
#define SPC_INQUIRY 0x12
|
||||
#define SPC_MODE_SELECT6 0x15
|
||||
#define SPC_MODE_SENSE6 0x1A
|
||||
#define SPC_SEND_DIAGNOSTIC 0x1D
|
||||
#define SPC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
|
||||
#define SPC_MODE_SENSE10 0x5A
|
||||
#define SPC_REPORT_LUNS 0xA0
|
||||
#define SPC_TEST_UNIT_READY 0x00
|
||||
#define SPC_REQUEST_SENSE 0x03
|
||||
#define SPC_INQUIRY 0x12
|
||||
#define SPC_MODE_SELECT6 0x15
|
||||
#define SPC_MODE_SENSE6 0x1A
|
||||
#define SPC_SEND_DIAGNOSTIC 0x1D
|
||||
#define SPC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
|
||||
#define SPC_MODE_SENSE10 0x5A
|
||||
#define SPC_REPORT_LUNS 0xA0
|
||||
//@}
|
||||
|
||||
//! \brief May be set in byte 0 of the INQUIRY CDB
|
||||
//@{
|
||||
//! Enable Vital Product Data
|
||||
#define SCSI_INQ_REQ_EVPD 0x01
|
||||
#define SCSI_INQ_REQ_EVPD 0x01
|
||||
//! Command Support Data specified by the PAGE OR OPERATION CODE field
|
||||
#define SCSI_INQ_REQ_CMDT 0x02
|
||||
#define SCSI_INQ_REQ_CMDT 0x02
|
||||
//@}
|
||||
|
||||
COMPILER_PACK_SET(1)
|
||||
@@ -84,110 +84,110 @@ COMPILER_PACK_SET(1)
|
||||
* \brief SCSI Standard Inquiry data structure
|
||||
*/
|
||||
struct scsi_inquiry_data {
|
||||
uint8_t pq_pdt; //!< Peripheral Qual / Peripheral Dev Type
|
||||
#define SCSI_INQ_PQ_CONNECTED 0x00 //!< Peripheral connected
|
||||
#define SCSI_INQ_PQ_NOT_CONN 0x20 //!< Peripheral not connected
|
||||
#define SCSI_INQ_PQ_NOT_SUPP 0x60 //!< Peripheral not supported
|
||||
#define SCSI_INQ_DT_DIR_ACCESS 0x00 //!< Direct Access (SBC)
|
||||
#define SCSI_INQ_DT_SEQ_ACCESS 0x01 //!< Sequential Access
|
||||
#define SCSI_INQ_DT_PRINTER 0x02 //!< Printer
|
||||
#define SCSI_INQ_DT_PROCESSOR 0x03 //!< Processor device
|
||||
#define SCSI_INQ_DT_WRITE_ONCE 0x04 //!< Write-once device
|
||||
#define SCSI_INQ_DT_CD_DVD 0x05 //!< CD/DVD device
|
||||
#define SCSI_INQ_DT_OPTICAL 0x07 //!< Optical Memory
|
||||
#define SCSI_INQ_DT_MC 0x08 //!< Medium Changer
|
||||
#define SCSI_INQ_DT_ARRAY 0x0C //!< Storage Array Controller
|
||||
#define SCSI_INQ_DT_ENCLOSURE 0x0D //!< Enclosure Services
|
||||
#define SCSI_INQ_DT_RBC 0x0E //!< Simplified Direct Access
|
||||
#define SCSI_INQ_DT_OCRW 0x0F //!< Optical card reader/writer
|
||||
#define SCSI_INQ_DT_BCC 0x10 //!< Bridge Controller Commands
|
||||
#define SCSI_INQ_DT_OSD 0x11 //!< Object-based Storage
|
||||
#define SCSI_INQ_DT_NONE 0x1F //!< No Peripheral
|
||||
uint8_t flags1; //!< Flags (byte 1)
|
||||
#define SCSI_INQ_RMB 0x80 //!< Removable Medium
|
||||
uint8_t version; //!< Version
|
||||
#define SCSI_INQ_VER_NONE 0x00 //!< No standards conformance
|
||||
#define SCSI_INQ_VER_SPC 0x03 //!< SCSI Primary Commands (link to SBC)
|
||||
#define SCSI_INQ_VER_SPC2 0x04 //!< SCSI Primary Commands - 2 (link to SBC-2)
|
||||
#define SCSI_INQ_VER_SPC3 0x05 //!< SCSI Primary Commands - 3 (link to SBC-2)
|
||||
#define SCSI_INQ_VER_SPC4 0x06 //!< SCSI Primary Commands - 4 (link to SBC-3)
|
||||
uint8_t flags3; //!< Flags (byte 3)
|
||||
#define SCSI_INQ_NORMACA 0x20 //!< Normal ACA Supported
|
||||
#define SCSI_INQ_HISUP 0x10 //!< Hierarchal LUN addressing
|
||||
#define SCSI_INQ_RSP_SPC2 0x02 //!< SPC-2 / SPC-3 response format
|
||||
uint8_t addl_len; //!< Additional Length (n-4)
|
||||
#define SCSI_INQ_ADDL_LEN(tot) ((tot)-5) //!< Total length is \a tot
|
||||
uint8_t flags5; //!< Flags (byte 5)
|
||||
#define SCSI_INQ_SCCS 0x80
|
||||
uint8_t flags6; //!< Flags (byte 6)
|
||||
#define SCSI_INQ_BQUE 0x80
|
||||
#define SCSI_INQ_ENCSERV 0x40
|
||||
#define SCSI_INQ_MULTIP 0x10
|
||||
#define SCSI_INQ_MCHGR 0x08
|
||||
#define SCSI_INQ_ADDR16 0x01
|
||||
uint8_t flags7; //!< Flags (byte 7)
|
||||
#define SCSI_INQ_WBUS16 0x20
|
||||
#define SCSI_INQ_SYNC 0x10
|
||||
#define SCSI_INQ_LINKED 0x08
|
||||
#define SCSI_INQ_CMDQUE 0x02
|
||||
uint8_t vendor_id[8]; //!< T10 Vendor Identification
|
||||
uint8_t product_id[16]; //!< Product Identification
|
||||
uint8_t product_rev[4]; //!< Product Revision Level
|
||||
uint8_t pq_pdt; //!< Peripheral Qual / Peripheral Dev Type
|
||||
#define SCSI_INQ_PQ_CONNECTED 0x00 //!< Peripheral connected
|
||||
#define SCSI_INQ_PQ_NOT_CONN 0x20 //!< Peripheral not connected
|
||||
#define SCSI_INQ_PQ_NOT_SUPP 0x60 //!< Peripheral not supported
|
||||
#define SCSI_INQ_DT_DIR_ACCESS 0x00 //!< Direct Access (SBC)
|
||||
#define SCSI_INQ_DT_SEQ_ACCESS 0x01 //!< Sequential Access
|
||||
#define SCSI_INQ_DT_PRINTER 0x02 //!< Printer
|
||||
#define SCSI_INQ_DT_PROCESSOR 0x03 //!< Processor device
|
||||
#define SCSI_INQ_DT_WRITE_ONCE 0x04 //!< Write-once device
|
||||
#define SCSI_INQ_DT_CD_DVD 0x05 //!< CD/DVD device
|
||||
#define SCSI_INQ_DT_OPTICAL 0x07 //!< Optical Memory
|
||||
#define SCSI_INQ_DT_MC 0x08 //!< Medium Changer
|
||||
#define SCSI_INQ_DT_ARRAY 0x0C //!< Storage Array Controller
|
||||
#define SCSI_INQ_DT_ENCLOSURE 0x0D //!< Enclosure Services
|
||||
#define SCSI_INQ_DT_RBC 0x0E //!< Simplified Direct Access
|
||||
#define SCSI_INQ_DT_OCRW 0x0F //!< Optical card reader/writer
|
||||
#define SCSI_INQ_DT_BCC 0x10 //!< Bridge Controller Commands
|
||||
#define SCSI_INQ_DT_OSD 0x11 //!< Object-based Storage
|
||||
#define SCSI_INQ_DT_NONE 0x1F //!< No Peripheral
|
||||
uint8_t flags1; //!< Flags (byte 1)
|
||||
#define SCSI_INQ_RMB 0x80 //!< Removable Medium
|
||||
uint8_t version; //!< Version
|
||||
#define SCSI_INQ_VER_NONE 0x00 //!< No standards conformance
|
||||
#define SCSI_INQ_VER_SPC 0x03 //!< SCSI Primary Commands (link to SBC)
|
||||
#define SCSI_INQ_VER_SPC2 0x04 //!< SCSI Primary Commands - 2 (link to SBC-2)
|
||||
#define SCSI_INQ_VER_SPC3 0x05 //!< SCSI Primary Commands - 3 (link to SBC-2)
|
||||
#define SCSI_INQ_VER_SPC4 0x06 //!< SCSI Primary Commands - 4 (link to SBC-3)
|
||||
uint8_t flags3; //!< Flags (byte 3)
|
||||
#define SCSI_INQ_NORMACA 0x20 //!< Normal ACA Supported
|
||||
#define SCSI_INQ_HISUP 0x10 //!< Hierarchal LUN addressing
|
||||
#define SCSI_INQ_RSP_SPC2 0x02 //!< SPC-2 / SPC-3 response format
|
||||
uint8_t addl_len; //!< Additional Length (n-4)
|
||||
#define SCSI_INQ_ADDL_LEN(tot) ((tot)-5) //!< Total length is \a tot
|
||||
uint8_t flags5; //!< Flags (byte 5)
|
||||
#define SCSI_INQ_SCCS 0x80
|
||||
uint8_t flags6; //!< Flags (byte 6)
|
||||
#define SCSI_INQ_BQUE 0x80
|
||||
#define SCSI_INQ_ENCSERV 0x40
|
||||
#define SCSI_INQ_MULTIP 0x10
|
||||
#define SCSI_INQ_MCHGR 0x08
|
||||
#define SCSI_INQ_ADDR16 0x01
|
||||
uint8_t flags7; //!< Flags (byte 7)
|
||||
#define SCSI_INQ_WBUS16 0x20
|
||||
#define SCSI_INQ_SYNC 0x10
|
||||
#define SCSI_INQ_LINKED 0x08
|
||||
#define SCSI_INQ_CMDQUE 0x02
|
||||
uint8_t vendor_id[8]; //!< T10 Vendor Identification
|
||||
uint8_t product_id[16]; //!< Product Identification
|
||||
uint8_t product_rev[4]; //!< Product Revision Level
|
||||
};
|
||||
|
||||
/**
|
||||
* \brief SCSI Standard Request sense data structure
|
||||
*/
|
||||
struct scsi_request_sense_data {
|
||||
/* 1st byte: REQUEST SENSE response flags*/
|
||||
uint8_t valid_reponse_code;
|
||||
#define SCSI_SENSE_VALID 0x80 //!< Indicates the INFORMATION field contains valid information
|
||||
#define SCSI_SENSE_RESPONSE_CODE_MASK 0x7F
|
||||
#define SCSI_SENSE_CURRENT 0x70 //!< Response code 70h (current errors)
|
||||
#define SCSI_SENSE_DEFERRED 0x71
|
||||
/* 1st byte: REQUEST SENSE response flags*/
|
||||
uint8_t valid_reponse_code;
|
||||
#define SCSI_SENSE_VALID 0x80 //!< Indicates the INFORMATION field contains valid information
|
||||
#define SCSI_SENSE_RESPONSE_CODE_MASK 0x7F
|
||||
#define SCSI_SENSE_CURRENT 0x70 //!< Response code 70h (current errors)
|
||||
#define SCSI_SENSE_DEFERRED 0x71
|
||||
|
||||
/* 2nd byte */
|
||||
uint8_t obsolete;
|
||||
/* 2nd byte */
|
||||
uint8_t obsolete;
|
||||
|
||||
/* 3rd byte */
|
||||
uint8_t sense_flag_key;
|
||||
#define SCSI_SENSE_FILEMARK 0x80 //!< Indicates that the current command has read a filemark or setmark.
|
||||
#define SCSI_SENSE_EOM 0x40 //!< Indicates that an end-of-medium condition exists.
|
||||
#define SCSI_SENSE_ILI 0x20 //!< Indicates that the requested logical block length did not match the logical block length of the data on the medium.
|
||||
#define SCSI_SENSE_RESERVED 0x10 //!< Reserved
|
||||
#define SCSI_SENSE_KEY(x) (x&0x0F) //!< Sense Key
|
||||
/* 3rd byte */
|
||||
uint8_t sense_flag_key;
|
||||
#define SCSI_SENSE_FILEMARK 0x80 //!< Indicates that the current command has read a filemark or setmark.
|
||||
#define SCSI_SENSE_EOM 0x40 //!< Indicates that an end-of-medium condition exists.
|
||||
#define SCSI_SENSE_ILI 0x20 //!< Indicates that the requested logical block length did not match the logical block length of the data on the medium.
|
||||
#define SCSI_SENSE_RESERVED 0x10 //!< Reserved
|
||||
#define SCSI_SENSE_KEY(x) (x&0x0F) //!< Sense Key
|
||||
|
||||
/* 4th to 7th bytes - INFORMATION field */
|
||||
uint8_t information[4];
|
||||
/* 4th to 7th bytes - INFORMATION field */
|
||||
uint8_t information[4];
|
||||
|
||||
/* 8th byte - ADDITIONAL SENSE LENGTH field */
|
||||
uint8_t AddSenseLen;
|
||||
#define SCSI_SENSE_ADDL_LEN(total_len) ((total_len) - 8)
|
||||
/* 8th byte - ADDITIONAL SENSE LENGTH field */
|
||||
uint8_t AddSenseLen;
|
||||
#define SCSI_SENSE_ADDL_LEN(total_len) ((total_len) - 8)
|
||||
|
||||
/* 9th to 12th byte - COMMAND-SPECIFIC INFORMATION field */
|
||||
uint8_t CmdSpecINFO[4];
|
||||
/* 9th to 12th byte - COMMAND-SPECIFIC INFORMATION field */
|
||||
uint8_t CmdSpecINFO[4];
|
||||
|
||||
/* 13th byte - ADDITIONAL SENSE CODE field */
|
||||
uint8_t AddSenseCode;
|
||||
/* 13th byte - ADDITIONAL SENSE CODE field */
|
||||
uint8_t AddSenseCode;
|
||||
|
||||
/* 14th byte - ADDITIONAL SENSE CODE QUALIFIER field */
|
||||
uint8_t AddSnsCodeQlfr;
|
||||
/* 14th byte - ADDITIONAL SENSE CODE QUALIFIER field */
|
||||
uint8_t AddSnsCodeQlfr;
|
||||
|
||||
/* 15th byte - FIELD REPLACEABLE UNIT CODE field */
|
||||
uint8_t FldReplUnitCode;
|
||||
/* 15th byte - FIELD REPLACEABLE UNIT CODE field */
|
||||
uint8_t FldReplUnitCode;
|
||||
|
||||
/* 16th byte */
|
||||
uint8_t SenseKeySpec[3];
|
||||
#define SCSI_SENSE_SKSV 0x80 //!< Indicates the SENSE-KEY SPECIFIC field contains valid information
|
||||
/* 16th byte */
|
||||
uint8_t SenseKeySpec[3];
|
||||
#define SCSI_SENSE_SKSV 0x80 //!< Indicates the SENSE-KEY SPECIFIC field contains valid information
|
||||
};
|
||||
|
||||
COMPILER_PACK_RESET()
|
||||
|
||||
/* Vital Product Data page codes */
|
||||
enum scsi_vpd_page_code {
|
||||
SCSI_VPD_SUPPORTED_PAGES = 0x00,
|
||||
SCSI_VPD_UNIT_SERIAL_NUMBER = 0x80,
|
||||
SCSI_VPD_DEVICE_IDENTIFICATION = 0x83,
|
||||
SCSI_VPD_SUPPORTED_PAGES = 0x00,
|
||||
SCSI_VPD_UNIT_SERIAL_NUMBER = 0x80,
|
||||
SCSI_VPD_DEVICE_IDENTIFICATION = 0x83,
|
||||
};
|
||||
#define SCSI_VPD_HEADER_SIZE 4
|
||||
|
||||
@@ -200,37 +200,36 @@ enum scsi_vpd_page_code {
|
||||
|
||||
#define SCSI_VPD_ID_TYPE_T10 1
|
||||
|
||||
|
||||
/* Sense keys */
|
||||
enum scsi_sense_key {
|
||||
SCSI_SK_NO_SENSE = 0x0,
|
||||
SCSI_SK_RECOVERED_ERROR = 0x1,
|
||||
SCSI_SK_NOT_READY = 0x2,
|
||||
SCSI_SK_MEDIUM_ERROR = 0x3,
|
||||
SCSI_SK_HARDWARE_ERROR = 0x4,
|
||||
SCSI_SK_ILLEGAL_REQUEST = 0x5,
|
||||
SCSI_SK_UNIT_ATTENTION = 0x6,
|
||||
SCSI_SK_DATA_PROTECT = 0x7,
|
||||
SCSI_SK_BLANK_CHECK = 0x8,
|
||||
SCSI_SK_VENDOR_SPECIFIC = 0x9,
|
||||
SCSI_SK_COPY_ABORTED = 0xA,
|
||||
SCSI_SK_ABORTED_COMMAND = 0xB,
|
||||
SCSI_SK_VOLUME_OVERFLOW = 0xD,
|
||||
SCSI_SK_MISCOMPARE = 0xE,
|
||||
SCSI_SK_NO_SENSE = 0x0,
|
||||
SCSI_SK_RECOVERED_ERROR = 0x1,
|
||||
SCSI_SK_NOT_READY = 0x2,
|
||||
SCSI_SK_MEDIUM_ERROR = 0x3,
|
||||
SCSI_SK_HARDWARE_ERROR = 0x4,
|
||||
SCSI_SK_ILLEGAL_REQUEST = 0x5,
|
||||
SCSI_SK_UNIT_ATTENTION = 0x6,
|
||||
SCSI_SK_DATA_PROTECT = 0x7,
|
||||
SCSI_SK_BLANK_CHECK = 0x8,
|
||||
SCSI_SK_VENDOR_SPECIFIC = 0x9,
|
||||
SCSI_SK_COPY_ABORTED = 0xA,
|
||||
SCSI_SK_ABORTED_COMMAND = 0xB,
|
||||
SCSI_SK_VOLUME_OVERFLOW = 0xD,
|
||||
SCSI_SK_MISCOMPARE = 0xE,
|
||||
};
|
||||
|
||||
/* Additional Sense Code / Additional Sense Code Qualifier pairs */
|
||||
enum scsi_asc_ascq {
|
||||
SCSI_ASC_NO_ADDITIONAL_SENSE_INFO = 0x0000,
|
||||
SCSI_ASC_LU_NOT_READY_REBUILD_IN_PROGRESS = 0x0405,
|
||||
SCSI_ASC_WRITE_ERROR = 0x0C00,
|
||||
SCSI_ASC_UNRECOVERED_READ_ERROR = 0x1100,
|
||||
SCSI_ASC_INVALID_COMMAND_OPERATION_CODE = 0x2000,
|
||||
SCSI_ASC_INVALID_FIELD_IN_CDB = 0x2400,
|
||||
SCSI_ASC_WRITE_PROTECTED = 0x2700,
|
||||
SCSI_ASC_NOT_READY_TO_READY_CHANGE = 0x2800,
|
||||
SCSI_ASC_MEDIUM_NOT_PRESENT = 0x3A00,
|
||||
SCSI_ASC_INTERNAL_TARGET_FAILURE = 0x4400,
|
||||
SCSI_ASC_NO_ADDITIONAL_SENSE_INFO = 0x0000,
|
||||
SCSI_ASC_LU_NOT_READY_REBUILD_IN_PROGRESS = 0x0405,
|
||||
SCSI_ASC_WRITE_ERROR = 0x0C00,
|
||||
SCSI_ASC_UNRECOVERED_READ_ERROR = 0x1100,
|
||||
SCSI_ASC_INVALID_COMMAND_OPERATION_CODE = 0x2000,
|
||||
SCSI_ASC_INVALID_FIELD_IN_CDB = 0x2400,
|
||||
SCSI_ASC_WRITE_PROTECTED = 0x2700,
|
||||
SCSI_ASC_NOT_READY_TO_READY_CHANGE = 0x2800,
|
||||
SCSI_ASC_MEDIUM_NOT_PRESENT = 0x3A00,
|
||||
SCSI_ASC_INTERNAL_TARGET_FAILURE = 0x4400,
|
||||
};
|
||||
|
||||
/**
|
||||
@@ -240,9 +239,9 @@ enum scsi_asc_ascq {
|
||||
* that are applicable to all SCSI devices.
|
||||
*/
|
||||
enum scsi_spc_mode {
|
||||
SCSI_MS_MODE_VENDOR_SPEC = 0x00,
|
||||
SCSI_MS_MODE_INFEXP = 0x1C, // Informational exceptions control page
|
||||
SCSI_MS_MODE_ALL = 0x3F,
|
||||
SCSI_MS_MODE_VENDOR_SPEC = 0x00,
|
||||
SCSI_MS_MODE_INFEXP = 0x1C, // Informational exceptions control page
|
||||
SCSI_MS_MODE_ALL = 0x3F,
|
||||
};
|
||||
|
||||
/**
|
||||
@@ -250,51 +249,45 @@ enum scsi_spc_mode {
|
||||
* See chapter 8.3.8
|
||||
*/
|
||||
struct spc_control_page_info_execpt {
|
||||
uint8_t page_code;
|
||||
uint8_t page_length;
|
||||
#define SPC_MP_INFEXP_PAGE_LENGTH 0x0A
|
||||
uint8_t flags1;
|
||||
#define SPC_MP_INFEXP_PERF (1<<7) //!< Initiator Control
|
||||
#define SPC_MP_INFEXP_EBF (1<<5) //!< Caching Analysis Permitted
|
||||
#define SPC_MP_INFEXP_EWASC (1<<4) //!< Discontinuity
|
||||
#define SPC_MP_INFEXP_DEXCPT (1<<3) //!< Size enable
|
||||
#define SPC_MP_INFEXP_TEST (1<<2) //!< Writeback Cache Enable
|
||||
#define SPC_MP_INFEXP_LOGERR (1<<0) //!< Log errors bit
|
||||
uint8_t mrie;
|
||||
#define SPC_MP_INFEXP_MRIE_NO_REPORT 0x00
|
||||
#define SPC_MP_INFEXP_MRIE_ASYNC_EVENT 0x01
|
||||
#define SPC_MP_INFEXP_MRIE_GEN_UNIT 0x02
|
||||
#define SPC_MP_INFEXP_MRIE_COND_RECOV_ERROR 0x03
|
||||
#define SPC_MP_INFEXP_MRIE_UNCOND_RECOV_ERROR 0x04
|
||||
#define SPC_MP_INFEXP_MRIE_NO_SENSE 0x05
|
||||
#define SPC_MP_INFEXP_MRIE_ONLY_REPORT 0x06
|
||||
be32_t interval_timer;
|
||||
be32_t report_count;
|
||||
uint8_t page_code;
|
||||
uint8_t page_length;
|
||||
#define SPC_MP_INFEXP_PAGE_LENGTH 0x0A
|
||||
uint8_t flags1;
|
||||
#define SPC_MP_INFEXP_PERF (1<<7) //!< Initiator Control
|
||||
#define SPC_MP_INFEXP_EBF (1<<5) //!< Caching Analysis Permitted
|
||||
#define SPC_MP_INFEXP_EWASC (1<<4) //!< Discontinuity
|
||||
#define SPC_MP_INFEXP_DEXCPT (1<<3) //!< Size enable
|
||||
#define SPC_MP_INFEXP_TEST (1<<2) //!< Writeback Cache Enable
|
||||
#define SPC_MP_INFEXP_LOGERR (1<<0) //!< Log errors bit
|
||||
uint8_t mrie;
|
||||
#define SPC_MP_INFEXP_MRIE_NO_REPORT 0x00
|
||||
#define SPC_MP_INFEXP_MRIE_ASYNC_EVENT 0x01
|
||||
#define SPC_MP_INFEXP_MRIE_GEN_UNIT 0x02
|
||||
#define SPC_MP_INFEXP_MRIE_COND_RECOV_ERROR 0x03
|
||||
#define SPC_MP_INFEXP_MRIE_UNCOND_RECOV_ERROR 0x04
|
||||
#define SPC_MP_INFEXP_MRIE_NO_SENSE 0x05
|
||||
#define SPC_MP_INFEXP_MRIE_ONLY_REPORT 0x06
|
||||
be32_t interval_timer;
|
||||
be32_t report_count;
|
||||
};
|
||||
|
||||
|
||||
enum scsi_spc_mode_sense_pc {
|
||||
SCSI_MS_SENSE_PC_CURRENT = 0,
|
||||
SCSI_MS_SENSE_PC_CHANGEABLE = 1,
|
||||
SCSI_MS_SENSE_PC_DEFAULT = 2,
|
||||
SCSI_MS_SENSE_PC_SAVED = 3,
|
||||
SCSI_MS_SENSE_PC_CURRENT = 0,
|
||||
SCSI_MS_SENSE_PC_CHANGEABLE = 1,
|
||||
SCSI_MS_SENSE_PC_DEFAULT = 2,
|
||||
SCSI_MS_SENSE_PC_SAVED = 3,
|
||||
};
|
||||
|
||||
|
||||
|
||||
static inline bool scsi_mode_sense_dbd_is_set(const uint8_t * cdb)
|
||||
{
|
||||
return (cdb[1] >> 3) & 1;
|
||||
static inline bool scsi_mode_sense_dbd_is_set(const uint8_t * cdb) {
|
||||
return (cdb[1] >> 3) & 1;
|
||||
}
|
||||
|
||||
static inline uint8_t scsi_mode_sense_get_page_code(const uint8_t * cdb)
|
||||
{
|
||||
return cdb[2] & 0x3F;
|
||||
static inline uint8_t scsi_mode_sense_get_page_code(const uint8_t * cdb) {
|
||||
return cdb[2] & 0x3F;
|
||||
}
|
||||
|
||||
static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb)
|
||||
{
|
||||
return cdb[2] >> 6;
|
||||
static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb) {
|
||||
return cdb[2] >> 6;
|
||||
}
|
||||
|
||||
/**
|
||||
@@ -302,10 +295,10 @@ static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb)
|
||||
* SENSE(6)
|
||||
*/
|
||||
struct scsi_mode_param_header6 {
|
||||
uint8_t mode_data_length; //!< Number of bytes after this
|
||||
uint8_t medium_type; //!< Medium Type
|
||||
uint8_t device_specific_parameter; //!< Defined by command set
|
||||
uint8_t block_descriptor_length; //!< Length of block descriptors
|
||||
uint8_t mode_data_length; //!< Number of bytes after this
|
||||
uint8_t medium_type; //!< Medium Type
|
||||
uint8_t device_specific_parameter; //!< Defined by command set
|
||||
uint8_t block_descriptor_length; //!< Length of block descriptors
|
||||
};
|
||||
|
||||
/**
|
||||
@@ -313,23 +306,23 @@ struct scsi_mode_param_header6 {
|
||||
* SENSE(10)
|
||||
*/
|
||||
struct scsi_mode_param_header10 {
|
||||
be16_t mode_data_length; //!< Number of bytes after this
|
||||
uint8_t medium_type; //!< Medium Type
|
||||
uint8_t device_specific_parameter; //!< Defined by command set
|
||||
uint8_t flags4; //!< LONGLBA in bit 0
|
||||
uint8_t reserved;
|
||||
be16_t block_descriptor_length; //!< Length of block descriptors
|
||||
be16_t mode_data_length; //!< Number of bytes after this
|
||||
uint8_t medium_type; //!< Medium Type
|
||||
uint8_t device_specific_parameter; //!< Defined by command set
|
||||
uint8_t flags4; //!< LONGLBA in bit 0
|
||||
uint8_t reserved;
|
||||
be16_t block_descriptor_length; //!< Length of block descriptors
|
||||
};
|
||||
|
||||
/**
|
||||
* \brief SCSI Page_0 Mode Page header (SPF not set)
|
||||
*/
|
||||
struct scsi_mode_page_0_header {
|
||||
uint8_t page_code;
|
||||
#define SCSI_PAGE_CODE_PS (1 << 7) //!< Parameters Saveable
|
||||
#define SCSI_PAGE_CODE_SPF (1 << 6) //!< SubPage Format
|
||||
uint8_t page_length; //!< Number of bytes after this
|
||||
#define SCSI_MS_PAGE_LEN(total) ((total) - 2)
|
||||
uint8_t page_code;
|
||||
#define SCSI_PAGE_CODE_PS (1 << 7) //!< Parameters Saveable
|
||||
#define SCSI_PAGE_CODE_SPF (1 << 6) //!< SubPage Format
|
||||
uint8_t page_length; //!< Number of bytes after this
|
||||
#define SCSI_MS_PAGE_LEN(total) ((total) - 2)
|
||||
};
|
||||
|
||||
//@}
|
||||
|
||||
Reference in New Issue
Block a user