wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

klicky probe initial commit

Browse Source
This commit is contained in:
Suat Özgür
2023-05-24 22:31:27 +02:00
parent 4d6715761d
commit 78eab4e511
4 changed files with 48 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files

45
Marlin/Configuration.h
View File

@@ -1662,7 +1662,7 @@
* Use G29 repeatedly, adjusting the Z height at each point with movement commands
* or (with LCD_BED_LEVELING) the LCD controller.
*/
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING, KNUTWURST_KLICKY)
#define PROBE_MANUALLY
#endif
@@ -1739,21 +1739,24 @@
* Magnetically Mounted Probe
* For probes such as Euclid, Klicky, Klackender, etc.
*/
// #define MAG_MOUNTED_PROBE
#if ENABLED(MAG_MOUNTED_PROBE)
#define PROBE_DEPLOY_FEEDRATE (133 * 60) // (mm/min) Probe deploy speed
#define PROBE_STOW_FEEDRATE (133 * 60) // (mm/min) Probe stow speed
#if ENABLED(KNUTWURST_KLICKY)
// @see https://www.printables.com/model/489398-anycubic-mega-klicky-probe
#define MAG_MOUNTED_PROBE
#if ENABLED(MAG_MOUNTED_PROBE)
#define PROBE_DEPLOY_FEEDRATE (133 * 60) // (mm/min) Probe deploy speed
#define PROBE_STOW_FEEDRATE (133 * 60) // (mm/min) Probe stow speed
#define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } } // Move to side Dock & Attach probe
#define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } } // Move probe off dock
#define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
#define MAG_MOUNTED_DEPLOY_4 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
#define MAG_MOUNTED_DEPLOY_5 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
#define MAG_MOUNTED_STOW_1 { PROBE_STOW_FEEDRATE, { 245, 114, 20 } } // Move to dock
#define MAG_MOUNTED_STOW_2 { PROBE_STOW_FEEDRATE, { 245, 114, 0 } } // Place probe beside remover
#define MAG_MOUNTED_STOW_3 { PROBE_STOW_FEEDRATE, { 230, 114, 0 } } // Side move to remove probe
#define MAG_MOUNTED_STOW_4 { PROBE_STOW_FEEDRATE, { 210, 114, 20 } } // Side move to remove probe
#define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
#define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 176, 0, 0 } } // Move to front dock & attach probe
#define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 176, 0, 20 } } // Move probe off dock
#define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
#define MAG_MOUNTED_DEPLOY_4 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
#define MAG_MOUNTED_DEPLOY_5 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
#define MAG_MOUNTED_STOW_1 { PROBE_STOW_FEEDRATE, { 176, 0, 20 } } // Move right above the dock
#define MAG_MOUNTED_STOW_2 { PROBE_STOW_FEEDRATE, { 176, 0, 0 } } // Move probe into dock
#define MAG_MOUNTED_STOW_3 { PROBE_STOW_FEEDRATE, { 50, 0, 0 } } // Side move to remove probe
#define MAG_MOUNTED_STOW_4 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
#define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
#endif
#endif
// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J
@@ -1852,7 +1855,11 @@
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.8 }
#endif
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
#if ENABLED(KNUTWURST_KLICKY)
#define NOZZLE_TO_PROBE_OFFSET { 0, -25, -7 }
#endif
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING, KNUTWURST_KLICKY)
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
#endif
@@ -1862,6 +1869,8 @@
#if ENABLED(KNUTWURST_CHIRON)
#define PROBING_MARGIN 15
#elseif ENABLED(KNUTWURST_KLICKY)
#define PROBING_MARGIN 20
#else
#define PROBING_MARGIN 35
#endif
@@ -2480,7 +2489,7 @@
* leveling in steps so you can manually adjust the Z height at each grid-point.
* With an LCD controller the process is guided step-by-step.
*/
#if EITHER(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
#if ANY(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING, KNUTWURST_KLICKY)
// #define AUTO_BED_LEVELING_3POINT
// #define AUTO_BED_LEVELING_LINEAR
#define AUTO_BED_LEVELING_BILINEAR
@@ -2488,7 +2497,7 @@
// #define MESH_BED_LEVELING
#endif
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING, KNUTWURST_KLICKY)
// #define AUTO_BED_LEVELING_3POINT
// #define AUTO_BED_LEVELING_LINEAR
// #define AUTO_BED_LEVELING_BILINEAR