wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Add more information for developers

Browse Source
This commit is contained in:
Knutwurst
2020-08-11 06:50:24 +02:00
parent b00040c25d
commit 8d8d46a2b8
1 changed files with 50 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files

74
Marlin/Configuration.h
View File

@@ -43,18 +43,24 @@
//#define ANYCUBIC_TFT_DEBUG
//#define POWER_OUTAGE_TEST
/*****************************************************************************************
* *
* *
* WARNING: *
* THE FOLLOWING SETTINGS ARE NORMALLY SET BY PLATFORMIO! *
* *
* IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT *
* TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT! *
* OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END *
* UP WITH A NON FUNCTIONING FIRMWARE! *
* *
* ***************************************************************************************/
/*******************************************************************************************
** **
** **
** WARNING: **
** THE FOLLOWING SETTINGS ARE NORMALLY SET BY PLATFORMIO! **
** **
** IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT **
** TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT! **
** OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END **
** UP WITH A NON FUNCTIONING FIRMWARE! **
** **
** If you want to select a specific configuration for your **
** printer, just open the PlatformIO tab on the left, select **
** PROJECT TASKS and then "env:i3_MEGA*" (your desired config) **
** From there you can build and upload your code. **
** **
** **
*******************************************************************************************/
/*
@@ -64,6 +70,9 @@
* MEGA is the normal i3 Version without spool holder and the cassic extruder
* MEGA_S is the S version with Titan clone extruder
* MEGA_X is the big version with 310x310mm Bed
*
* PLEASE READ THE WARNING ABOVE!
*
*/
//#define KNUTWURST_MEGA
//#define KNUTWURST_MEGA_S
@@ -74,6 +83,9 @@
* you have the "new" Mega S with the blue/yellow
* Touchscreen display, you need to enable the
* DGUS2 switch to get the special menu to work
*
* PLEASE READ THE WARNING ABOVE!
*
*/
//#define KNUTWURST_DGUS2_TFT
@@ -81,6 +93,8 @@
* Enable Support for Trinamic Stepper drivers.
* This also inverts the X,Y,Z and Extruder motor
* outputs/directions.
*
* PLEASE READ THE WARNING ABOVE!
*/
//#define KNUTWURST_TMC
@@ -90,6 +104,9 @@
* special menu. It also removes all manual
* leveling features because they are not
* neccessary at all.
*
* PLEASE READ THE WARNING ABOVE!
*
*/
//#define KNUTWURST_BLTOUCH // see <https://github.com/DerDominik/Marlin-AnycubicI3Mega-BLTouch/wiki/Aufbauplan_BLTouch>
@@ -98,22 +115,31 @@
* It enabled more console output and should be
* disabled in production. It can cause the
* printer to stutter.
*
* PLEASE READ THE WARNING ABOVE!
*
*/
//#define KNUTWURST_DEBUG
/*****************************************************************************************
* *
* *
* WARNING: *
* THE SETTINGS ABOVE ARE NORMALLY SET BY PLATFORMIO! *
* *
* IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT *
* TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT! *
* OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END *
* UP WITH A NON FUNCTIONING FIRMWARE! *
* *
* ***************************************************************************************/
/*******************************************************************************************
** **
** **
** WARNING: **
** THE SETTINGS ABOVE ARE NORMALLY SET BY PLATFORMIO! **
** **
** IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT **
** TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT! **
** OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END **
** UP WITH A NON FUNCTIONING FIRMWARE! **
** **
** If you want to select a specific configuration for your **
** printer, just open the PlatformIO tab on the left, select **
** PROJECT TASKS and then "env:i3_MEGA*" (your desired config) **
** From there you can build and upload your code. **
** **
** **
*******************************************************************************************/
/*