wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Merge upstream changes from Marlin 2.1.1

Browse Source
This commit is contained in:
Stefan Kalscheuer
2022-09-03 09:23:32 +02:00
parent 626283aadb
commit 986e416c7f
1610 changed files with 73839 additions and 40857 deletions
Download Patch File Download Diff File Expand all files Collapse all files

53
Marlin/src/HAL/ESP32/i2s.cpp
View File

@@ -23,6 +23,8 @@
#include "../../inc/MarlinConfigPre.h"
#if DISABLED(USE_ESP32_EXIO)
#include "i2s.h"
#include "../shared/Marduino.h"
@@ -62,12 +64,9 @@ uint32_t i2s_port_data = 0;
#define I2S_EXIT_CRITICAL() portEXIT_CRITICAL(&i2s_spinlock[i2s_num])
static inline void gpio_matrix_out_check(uint32_t gpio, uint32_t signal_idx, bool out_inv, bool oen_inv) {
//if pin = -1, do not need to configure
if (gpio != -1) {
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio], PIN_FUNC_GPIO);
gpio_set_direction((gpio_num_t)gpio, (gpio_mode_t)GPIO_MODE_DEF_OUTPUT);
gpio_matrix_out(gpio, signal_idx, out_inv, oen_inv);
}
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio], PIN_FUNC_GPIO);
gpio_set_direction((gpio_num_t)gpio, (gpio_mode_t)GPIO_MODE_DEF_OUTPUT);
gpio_matrix_out(gpio, signal_idx, out_inv, oen_inv);
}
static esp_err_t i2s_reset_fifo(i2s_port_t i2s_num) {
@@ -254,13 +253,7 @@ int i2s_init() {
I2S0.fifo_conf.dscr_en = 0;
I2S0.conf_chan.tx_chan_mod = (
#if ENABLED(I2S_STEPPER_SPLIT_STREAM)
4
#else
0
#endif
);
I2S0.conf_chan.tx_chan_mod = TERN(I2S_STEPPER_SPLIT_STREAM, 4, 0);
I2S0.fifo_conf.tx_fifo_mod = 0;
I2S0.conf.tx_mono = 0;
@@ -311,9 +304,16 @@ int i2s_init() {
xTaskCreatePinnedToCore(stepperTask, "StepperTask", 10000, nullptr, 1, nullptr, CONFIG_ARDUINO_RUNNING_CORE); // run I2S stepper task on same core as rest of Marlin
// Route the i2s pins to the appropriate GPIO
gpio_matrix_out_check(I2S_DATA, I2S0O_DATA_OUT23_IDX, 0, 0);
gpio_matrix_out_check(I2S_BCK, I2S0O_BCK_OUT_IDX, 0, 0);
gpio_matrix_out_check(I2S_WS, I2S0O_WS_OUT_IDX, 0, 0);
// If a pin is not defined, no need to configure
#if defined(I2S_DATA) && I2S_DATA >= 0
gpio_matrix_out_check(I2S_DATA, I2S0O_DATA_OUT23_IDX, 0, 0);
#endif
#if defined(I2S_BCK) && I2S_BCK >= 0
gpio_matrix_out_check(I2S_BCK, I2S0O_BCK_OUT_IDX, 0, 0);
#endif
#if defined(I2S_WS) && I2S_WS >= 0
gpio_matrix_out_check(I2S_WS, I2S0O_WS_OUT_IDX, 0, 0);
#endif
// Start the I2S peripheral
return i2s_start(I2S_NUM_0);
@@ -337,7 +337,28 @@ uint8_t i2s_state(uint8_t pin) {
}
void i2s_push_sample() {
// Every 4µs (when space in DMA buffer) toggle each expander PWM output using
// the current duty cycle/frequency so they sync with any steps (once
// through the DMA/FIFO buffers). PWM signal inversion handled by other functions
LOOP_L_N(p, MAX_EXPANDER_BITS) {
if (hal.pwm_pin_data[p].pwm_duty_ticks > 0) { // pin has active pwm?
if (hal.pwm_pin_data[p].pwm_tick_count == 0) {
if (TEST32(i2s_port_data, p)) { // hi->lo
CBI32(i2s_port_data, p);
hal.pwm_pin_data[p].pwm_tick_count = hal.pwm_pin_data[p].pwm_cycle_ticks - hal.pwm_pin_data[p].pwm_duty_ticks;
}
else { // lo->hi
SBI32(i2s_port_data, p);
hal.pwm_pin_data[p].pwm_tick_count = hal.pwm_pin_data[p].pwm_duty_ticks;
}
}
else
hal.pwm_pin_data[p].pwm_tick_count--;
}
}
dma.current[dma.rw_pos++] = i2s_port_data;
}
#endif // !USE_ESP32_EXIO
#endif // ARDUINO_ARCH_ESP32