wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Merge upstream changes from Marlin 2.1.1

Browse Source
This commit is contained in:
Stefan Kalscheuer
2022-09-03 09:23:32 +02:00
parent 626283aadb
commit 986e416c7f
1610 changed files with 73839 additions and 40857 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
Marlin/src/lcd/extui/anycubic_i3mega/anycubic_extui.cpp
View File

@@ -37,14 +37,12 @@ namespace ExtUI {
void onStartup() { AnycubicTFT.OnSetup(); }
void onIdle() { AnycubicTFT.OnCommandScan(); }
void onPrinterKilled(PGM_P const error, PGM_P const component) { AnycubicTFT.OnKillTFT(); }
void onPrinterKilled(FSTR_P const error, FSTR_P const component) { AnycubicTFT.OnKillTFT(); }
void onMediaInserted() { AnycubicTFT.OnSDCardStateChange(true); }
void onMediaError() { AnycubicTFT.OnSDCardError(); }
void onMediaRemoved() { AnycubicTFT.OnSDCardStateChange(false); }
void onPlayTone(const uint16_t frequency, const uint16_t duration) {
#if ENABLED(SPEAKER)
::tone(BEEPER_PIN, frequency, duration);
#endif
TERN_(SPEAKER, ::tone(BEEPER_PIN, frequency, duration));
}
void onPrintTimerStarted() { AnycubicTFT.OnPrintTimerStarted(); }
void onPrintTimerPaused() { AnycubicTFT.OnPrintTimerPaused(); }
@@ -54,8 +52,8 @@ namespace ExtUI {
void onStatusChanged(const char * const msg) {}
void onHomingStart() {}
void onHomingComplete() {}
void onPrintFinished() {}
void onHomingDone() {}
void onPrintDone() {}
void onFactoryReset() {}
@@ -83,19 +81,20 @@ namespace ExtUI {
// Called after loading or resetting stored settings
}
void onConfigurationStoreWritten(bool success) {
void onSettingsStored(bool success) {
// Called after the entire EEPROM has been written,
// whether successful or not.
}
void onConfigurationStoreRead(bool success) {
void onSettingsLoaded(bool success) {
// Called after the entire EEPROM has been read,
// whether successful or not.
}
#if HAS_MESH
void onMeshLevelingStart() {}
void onLevelingStart() {}
void onLevelingDone() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
// Called when any mesh points are updated

68
Marlin/src/lcd/extui/anycubic_i3mega/anycubic_i3mega_lcd.cpp
View File

@@ -63,7 +63,7 @@ char AnycubicTFTClass::SelectedDirectory[30];
char AnycubicTFTClass::SelectedFile[FILENAME_LENGTH];
// Serial helpers
static void sendNewLine(void) { LCD_SERIAL.write('\r'); LCD_SERIAL.write('\n'); }
static void sendNewLine() { LCD_SERIAL.write('\r'); LCD_SERIAL.write('\n'); }
static void send(const char *str) { LCD_SERIAL.print(str); }
static void send_P(PGM_P str) {
while (const char c = pgm_read_byte(str++))
@@ -85,8 +85,8 @@ void AnycubicTFTClass::OnSetup() {
SENDLINE_DBG_PGM("J17", "TFT Serial Debug: Main board reset... J17"); // J17 Main board reset
delay_ms(10);
// initialise the state of the key pins running on the tft
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
// Init the state of the key pins running on the TFT
#if BOTH(SDSUPPORT, HAS_SD_DETECT)
SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
@@ -104,7 +104,7 @@ void AnycubicTFTClass::OnSetup() {
SelectedFile[0] = 0;
#if ENABLED(STARTUP_CHIME)
injectCommands_P(PSTR("M300 P250 S554\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P500 S831"));
injectCommands(F("M300 P250 S554\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P500 S831"));
#endif
#if ENABLED(ANYCUBIC_LCD_DEBUG)
SERIAL_ECHOLNPGM("TFT Serial Debug: Finished startup");
@@ -122,7 +122,7 @@ void AnycubicTFTClass::OnCommandScan() {
#endif
mediaPrintingState = AMPRINTSTATE_NOT_PRINTING;
mediaPauseState = AMPAUSESTATE_NOT_PAUSED;
injectCommands_P(PSTR("M84\nM27")); // disable stepper motors and force report of SD status
injectCommands(F("M84\nM27")); // disable stepper motors and force report of SD status
delay_ms(200);
// tell printer to release resources of print to indicate it is done
SENDLINE_DBG_PGM("J14", "TFT Serial Debug: SD Print Stopped... J14");
@@ -249,48 +249,48 @@ void AnycubicTFTClass::HandleSpecialMenu() {
switch (SelectedDirectory[2]) {
case '1': // "<01ZUp0.1>"
SERIAL_ECHOLNPGM("Special Menu: Z Up 0.1");
injectCommands_P(PSTR("G91\nG1 Z+0.1\nG90"));
injectCommands(F("G91\nG1 Z+0.1\nG90"));
break;
case '2': // "<02ZUp0.02>"
SERIAL_ECHOLNPGM("Special Menu: Z Up 0.02");
injectCommands_P(PSTR("G91\nG1 Z+0.02\nG90"));
injectCommands(F("G91\nG1 Z+0.02\nG90"));
break;
case '3': // "<03ZDn0.02>"
SERIAL_ECHOLNPGM("Special Menu: Z Down 0.02");
injectCommands_P(PSTR("G91\nG1 Z-0.02\nG90"));
injectCommands(F("G91\nG1 Z-0.02\nG90"));
break;
case '4': // "<04ZDn0.1>"
SERIAL_ECHOLNPGM("Special Menu: Z Down 0.1");
injectCommands_P(PSTR("G91\nG1 Z-0.1\nG90"));
injectCommands(F("G91\nG1 Z-0.1\nG90"));
break;
case '5': // "<05PrehtBed>"
SERIAL_ECHOLNPGM("Special Menu: Preheat Bed");
injectCommands_P(PSTR("M140 S65"));
injectCommands(F("M140 S65"));
break;
case '6': // "<06SMeshLvl>"
SERIAL_ECHOLNPGM("Special Menu: Start Mesh Leveling");
injectCommands_P(PSTR("G29S1"));
injectCommands(F("G29S1"));
break;
case '7': // "<07MeshNPnt>"
SERIAL_ECHOLNPGM("Special Menu: Next Mesh Point");
injectCommands_P(PSTR("G29S2"));
injectCommands(F("G29S2"));
break;
case '8': // "<08HtEndPID>"
SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotend PID");
// need to dwell for half a second to give the fan a chance to start before the pid tuning starts
injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1"));
injectCommands(F("M106 S204\nG4 P500\nM303 E0 S215 C15 U1"));
break;
case '9': // "<09HtBedPID>"
SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotbed Pid");
injectCommands_P(PSTR("M303 E-1 S65 C6 U1"));
injectCommands(F("M303 E-1 S65 C6 U1"));
break;
default:
@@ -302,12 +302,12 @@ void AnycubicTFTClass::HandleSpecialMenu() {
switch (SelectedDirectory[2]) {
case '0': // "<10FWDeflts>"
SERIAL_ECHOLNPGM("Special Menu: Load FW Defaults");
injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108"));
injectCommands(F("M502\nM300 P105 S1661\nM300 P210 S1108"));
break;
case '1': // "<11SvEEPROM>"
SERIAL_ECHOLNPGM("Special Menu: Save EEPROM");
injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661"));
injectCommands(F("M500\nM300 P105 S1108\nM300 P210 S1661"));
break;
default:
@@ -319,38 +319,38 @@ void AnycubicTFTClass::HandleSpecialMenu() {
switch (SelectedDirectory[2]) {
case '1': // "<01PrehtBed>"
SERIAL_ECHOLNPGM("Special Menu: Preheat Bed");
injectCommands_P(PSTR("M140 S65"));
injectCommands(F("M140 S65"));
break;
case '2': // "<02ABL>"
SERIAL_ECHOLNPGM("Special Menu: Auto Bed Leveling");
injectCommands_P(PSTR("G29N"));
injectCommands(F("G29N"));
break;
case '3': // "<03HtendPID>"
SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotend PID");
// need to dwell for half a second to give the fan a chance to start before the pid tuning starts
injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1"));
injectCommands(F("M106 S204\nG4 P500\nM303 E0 S215 C15 U1"));
break;
case '4': // "<04HtbedPID>"
SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotbed Pid");
injectCommands_P(PSTR("M303 E-1 S65 C6 U1"));
injectCommands(F("M303 E-1 S65 C6 U1"));
break;
case '5': // "<05FWDeflts>"
SERIAL_ECHOLNPGM("Special Menu: Load FW Defaults");
injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108"));
injectCommands(F("M502\nM300 P105 S1661\nM300 P210 S1108"));
break;
case '6': // "<06SvEEPROM>"
SERIAL_ECHOLNPGM("Special Menu: Save EEPROM");
injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661"));
injectCommands(F("M500\nM300 P105 S1108\nM300 P210 S1661"));
break;
case '7': // <07SendM108>
SERIAL_ECHOLNPGM("Special Menu: Send User Confirmation");
injectCommands_P(PSTR("M108"));
injectCommands(F("M108"));
break;
default:
@@ -654,7 +654,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
break;
case 12: // A12 kill
kill(PSTR(STR_ERR_KILLED));
kill(F(STR_ERR_KILLED));
break;
case 13: // A13 SELECTION FILE
@@ -705,7 +705,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
}
else if (CodeSeen('C') && !isPrinting()) {
if (getAxisPosition_mm(Z) < 10)
injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS
injectCommands(F("G1 Z10")); // RASE Z AXIS
tempvalue = constrain(CodeValue(), 0, 275);
setTargetTemp_celsius(tempvalue, (extruder_t)E0);
}
@@ -756,11 +756,11 @@ void AnycubicTFTClass::GetCommandFromTFT() {
if (!isPrinting() && !isPrintingFromMediaPaused()) {
if (CodeSeen('X') || CodeSeen('Y') || CodeSeen('Z')) {
if (CodeSeen('X'))
injectCommands_P(PSTR("G28X"));
injectCommands(F("G28X"));
if (CodeSeen('Y'))
injectCommands_P(PSTR("G28Y"));
injectCommands(F("G28Y"));
if (CodeSeen('Z'))
injectCommands_P(PSTR("G28Z"));
injectCommands(F("G28Z"));
}
else if (CodeSeen('C')) {
injectCommands_P(G28_STR);
@@ -831,7 +831,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
case 23: // A23 preheat pla
if (!isPrinting()) {
if (getAxisPosition_mm(Z) < 10)
injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS
injectCommands(F("G1 Z10")); // RASE Z AXIS
setTargetTemp_celsius(PREHEAT_1_TEMP_BED, (heater_t)BED);
setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, (extruder_t)E0);
@@ -842,7 +842,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
case 24:// A24 preheat abs
if (!isPrinting()) {
if (getAxisPosition_mm(Z) < 10)
injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS
injectCommands(F("G1 Z10")); // RASE Z AXIS
setTargetTemp_celsius(PREHEAT_2_TEMP_BED, (heater_t)BED);
setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, (extruder_t)E0);
@@ -916,7 +916,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
}
void AnycubicTFTClass::DoSDCardStateCheck() {
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
#if BOTH(SDSUPPORT, HAS_SD_DETECT)
bool isInserted = isMediaInserted();
if (isInserted)
SENDLINE_DBG_PGM("J00", "TFT Serial Debug: SD card state changed... isInserted");
@@ -933,7 +933,7 @@ void AnycubicTFTClass::DoFilamentRunoutCheck() {
if (READ(FIL_RUNOUT1_PIN)) {
if (mediaPrintingState == AMPRINTSTATE_PRINTING || mediaPrintingState == AMPRINTSTATE_PAUSED || mediaPrintingState == AMPRINTSTATE_PAUSE_REQUESTED) {
// play tone to indicate filament is out
injectCommands_P(PSTR("\nM300 P200 S1567\nM300 P200 S1174\nM300 P200 S1567\nM300 P200 S1174\nM300 P2000 S1567"));
injectCommands(F("\nM300 P200 S1567\nM300 P200 S1174\nM300 P200 S1567\nM300 P200 S1174\nM300 P2000 S1567"));
// tell the user that the filament has run out and wait
SENDLINE_DBG_PGM("J23", "TFT Serial Debug: Blocking filament prompt... J23");
@@ -969,7 +969,7 @@ void AnycubicTFTClass::PausePrint() {
SENDLINE_DBG_PGM("J05", "TFT Serial Debug: SD print pause started... J05"); // J05 printing pause
// for some reason pausing the print doesn't retract the extruder so force a manual one here
injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90"));
injectCommands(F("G91\nG1 E-2 F1800\nG90"));
pausePrint();
}
#endif
@@ -1018,7 +1018,7 @@ void AnycubicTFTClass::StopPrint() {
SENDLINE_DBG_PGM("J16", "TFT Serial Debug: SD print stop called... J16");
// for some reason stopping the print doesn't retract the extruder so force a manual one here
injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90"));
injectCommands(F("G91\nG1 E-2 F1800\nG90"));
stopPrint();
#endif
}

2
Marlin/src/lcd/extui/anycubic_i3mega/anycubic_i3mega_lcd.h
View File

@@ -39,7 +39,7 @@ enum AnycubicMediaPauseState {
AMPAUSESTATE_PARKING,
AMPAUSESTATE_PARKED,
AMPAUSESTATE_FILAMENT_OUT,
AMPAUSESTATE_FIAMENT_PRUGING,
AMPAUSESTATE_FILAMENT_PURGING,
AMPAUSESTATE_HEATER_TIMEOUT,
AMPAUSESTATE_REHEATING,
AMPAUSESTATE_REHEAT_FINISHED