wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Merge upstream changes from Marlin 2.1.1

Browse Source
This commit is contained in:
Stefan Kalscheuer
2022-09-03 09:23:32 +02:00
parent 626283aadb
commit 986e416c7f
1610 changed files with 73839 additions and 40857 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h
View File

@@ -145,9 +145,9 @@
* PWM1.4 DIO53 SDSS(SSEL0) J3-5 AUX-3
* PWM1.4 DIO46 Z_STEP_PIN
* PWM1.5 DIO3 X_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
* PWM1.5 DIO9 RAMPS_D9_PIN
* PWM1.5 DIO9 MOSFET_B_PIN
* PWM1.6 DIO14 Y_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
* PWM1.6 DIO10 RAMPS_D10_PIN
* PWM1.6 DIO10 MOSFET_A_PIN
*/
/**

80
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h
View File

@@ -58,31 +58,31 @@
/** ------ ------
* 1.30 |10 9 | 2.11 0.17 |10 9 | 0.15
* 0.18 | 8 7 | 0.16 3.26 | 8 7 | 1.23
* 0.15 6 5 | NC 3.25 6 5 | 0.18
* NC | 4 3 | NC 1.31 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | NC
* 1.30 | 1 2 | 2.11 0.17 | 1 2 | 0.15
* 0.18 | 3 4 | 0.16 3.26 | 3 4 | 1.23
* 0.15 5 6 | -- 3.25 5 6 | 0.18
* -- | 7 8 | -- 1.31 | 7 8 | RESET
* GND | 9 10 | 5V GND | 9 10 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN -1 // NC
#define EXP1_04_PIN -1 // NC
#define EXP1_05_PIN -1 // NC
#define EXP1_06_PIN P0_15
#define EXP1_07_PIN P0_16
#define EXP1_08_PIN P0_18
#define EXP1_09_PIN P2_11
#define EXP1_10_PIN P1_30
#define EXP1_01_PIN P1_30
#define EXP1_02_PIN P2_11
#define EXP1_03_PIN P0_18
#define EXP1_04_PIN P0_16
#define EXP1_05_PIN P0_15
#define EXP1_06_PIN -1 // NC
#define EXP1_07_PIN -1 // NC
#define EXP1_08_PIN -1 // NC
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN P1_31
#define EXP2_05_PIN P0_18
#define EXP2_06_PIN P3_25
#define EXP2_07_PIN P1_23
#define EXP2_08_PIN P3_26
#define EXP2_09_PIN P0_15
#define EXP2_10_PIN P0_17
#define EXP2_01_PIN P0_17
#define EXP2_02_PIN P0_15
#define EXP2_03_PIN P3_26
#define EXP2_04_PIN P1_23
#define EXP2_05_PIN P3_25
#define EXP2_06_PIN P0_18
#define EXP2_07_PIN P1_31
#define EXP2_08_PIN -1 // RESET
/**
* LCD / Controller
@@ -100,23 +100,23 @@
#if IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS EXP2_08_PIN
#define TFTGLCD_CS EXP2_03_PIN
#endif
#elif HAS_WIRED_LCD
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#define BTN_ENC EXP1_02_PIN
#define LCD_SDSS EXP2_07_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP2_05_PIN
#define LCD_PINS_D4 EXP2_09_PIN
#define LCD_SDSS EXP2_04_PIN
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP2_06_PIN
#define LCD_PINS_D4 EXP2_02_PIN
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P2_06
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_A0 EXP1_04_PIN
#endif
#endif // HAS_WIRED_LCD
@@ -165,10 +165,10 @@
// When using any TMC SPI-based drivers, software SPI is used
// because pins may be shared with the display or SD card.
#define TMC_USE_SW_SPI
#define TMC_SW_MOSI EXP2_05_PIN
#define TMC_SW_MISO EXP2_10_PIN
#define TMC_SW_MOSI EXP2_06_PIN
#define TMC_SW_MISO EXP2_01_PIN
// To minimize pin usage use the same clock pin as the display/SD card reader. (May generate LCD noise.)
#define TMC_SW_SCK EXP2_09_PIN
#define TMC_SW_SCK EXP2_02_PIN
// If pin 2_06 is unused, it can be used for the clock to avoid the LCD noise.
//#define TMC_SW_SCK P2_06
@@ -211,11 +211,11 @@
// SDCARD_CONNECTION must not be 'LCD'. Nothing should be connected to EXP1/EXP2.
//#define SKR_USE_LCD_PINS_FOR_CS
#if ENABLED(SKR_USE_LCD_PINS_FOR_CS)
#define X_CS_PIN EXP2_07_PIN
#define Y_CS_PIN EXP2_08_PIN
#define Z_CS_PIN EXP1_09_PIN
#define E0_CS_PIN EXP2_06_PIN
#define E1_CS_PIN EXP2_04_PIN
#define X_CS_PIN EXP2_04_PIN
#define Y_CS_PIN EXP2_03_PIN
#define Z_CS_PIN EXP1_02_PIN
#define E0_CS_PIN EXP2_05_PIN
#define E1_CS_PIN EXP2_07_PIN
#endif
// Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
@@ -228,11 +228,11 @@
#define Z_CS_PIN P2_06
// We use SD_DETECT_PIN for E0
#undef SD_DETECT_PIN
#define E0_CS_PIN EXP2_04_PIN
#define E0_CS_PIN EXP2_07_PIN
// We use LCD_SDSS pin for E1
#undef LCD_SDSS
#define LCD_SDSS -1
#define E1_CS_PIN EXP2_07_PIN
#define E1_CS_PIN EXP2_04_PIN
#endif
// Example 3: Use the driver enable pins for chip-select.

235
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View File

@@ -26,7 +26,9 @@
*/
#define BOARD_INFO_NAME "BTT SKR V1.3"
#define LPC1768_IS_SKRV1_3 1
#define LPC1768_IS_SKRV1_3
#define USES_DIAG_JUMPERS
//
// Trinamic Stallguard pins
@@ -189,43 +191,46 @@
/**
* ------ ------
* (BEEPER) 1.30 |10 9 | 0.28 (BTN_ENC) (MISO) 0.17 |10 9 | 0.15 (SCK)
* (LCD_EN) 1.18 | 8 7 | 1.19 (LCD_RS) (BTN_EN1) 3.26 | 8 7 | 0.16 (SD_SS)
* (LCD_D4) 1.20 6 5 | 1.21 (LCD_D5) (BTN_EN2) 3.25 6 5 | 0.18 (MOSI)
* (LCD_D6) 1.22 | 4 3 | 1.23 (LCD_D7) (SD_DETECT) 1.31 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | NC
* (BEEPER) 1.30 | 1 2 | 0.28 (BTN_ENC) (MISO) 0.17 | 1 2 | 0.15 (SCK)
* (LCD_EN) 1.18 | 3 4 | 1.19 (LCD_RS) (BTN_EN1) 3.26 | 3 4 | 0.16 (SD_SS)
* (LCD_D4) 1.20 5 6 | 1.21 (LCD_D5) (BTN_EN2) 3.25 5 6 | 0.18 (MOSI)
* (LCD_D6) 1.22 | 7 8 | 1.23 (LCD_D7) (SD_DETECT) 1.31 | 7 8 | RESET
* GND | 9 10 | 5V GND | 9 10 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN P1_23
#define EXP1_04_PIN P1_22
#define EXP1_05_PIN P1_21
#define EXP1_06_PIN P1_20
#define EXP1_07_PIN P1_19
#define EXP1_08_PIN P1_18
#define EXP1_09_PIN P0_28
#define EXP1_10_PIN P1_30
#define EXP1_01_PIN P1_30
#define EXP1_02_PIN P0_28
#define EXP1_03_PIN P1_18
#define EXP1_04_PIN P1_19
#define EXP1_05_PIN P1_20
#define EXP1_06_PIN P1_21
#define EXP1_07_PIN P1_22
#define EXP1_08_PIN P1_23
#define EXP2_03_PIN -1
#define EXP2_04_PIN P1_31
#define EXP2_05_PIN P0_18
#define EXP2_06_PIN P3_25
#define EXP2_07_PIN P0_16
#define EXP2_08_PIN P3_26
#define EXP2_09_PIN P0_15
#define EXP2_10_PIN P0_17
#define EXP2_01_PIN P0_17
#define EXP2_02_PIN P0_15
#define EXP2_03_PIN P3_26
#define EXP2_04_PIN P0_16
#define EXP2_05_PIN P3_25
#define EXP2_06_PIN P0_18
#define EXP2_07_PIN P1_31
#define EXP2_08_PIN -1
#if HAS_WIRED_LCD
#if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING)
#error "ANET_FULL_GRAPHICS_LCD_ALT_WIRING only applies to the ANET 1.0 board."
#elif ENABLED(ANET_FULL_GRAPHICS_LCD)
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_3.h' for details. Comment out this line to continue."
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_3.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.
* 2. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!)
* 3. Rewire the CLK Signal (LCD Pin9) to LCD Pin7. (LCD Pin9 remains open because this pin is open drain.)
* 3. Rewire the CLK Signal (LCD Pin9) to LCD Pin7. (LCD Pin9 remains open because it is open drain.)
* 4. A wire is needed to connect the Reset switch at J3 (LCD Pin7) to EXP2 (Pin3) on the board.
*
* !!! If you are unsure, ask for help! Your motherboard may be damaged in some circumstances !!!
@@ -234,34 +239,68 @@
*
* BEFORE AFTER
* ------ ------
* GND 1 | 1 2 | 2 5V 5V 1 | 1 2 | 2 GND
* CS 3 | 3 4 | 4 BTN_EN2 CS 3 | 3 4 | 4 BTN_EN2
* SID 5 | 5 6 6 BTN_EN1 SID 5 | 5 6 6 BTN_EN1
* open 7 | 7 8 | 8 BTN_ENC CLK 7 | 7 8 | 8 BTN_ENC
* CLK 9 | 9 10 | 10 Beeper open 9 | 9 10 | 10 Beeper
* (CLK) | 1 2 | (BEEPER) (BEEPER) |10 9 | --
* -- | 3 4 | (BTN_ENC) (BTN_ENC) | 8 7 | (CLK)
* (SID) 5 6 | (BTN_EN1) (BTN_EN1) 6 5 | (SID)
* (CS) | 7 8 | (BTN_EN2) (BTN_EN2) | 4 3 | (CS)
* GND | 9 10 | 5V GND | 2 1 | 5V
* ------ ------
* LCD LCD
*/
#define LCD_PINS_RS EXP1_03_PIN
#define LCD_PINS_RS EXP1_08_PIN
#define BTN_EN1 EXP1_06_PIN
#define BTN_EN2 EXP1_04_PIN
#define BTN_ENC EXP1_08_PIN
#define BTN_EN1 EXP1_05_PIN
#define BTN_EN2 EXP1_07_PIN
#define BTN_ENC EXP1_03_PIN
#define LCD_PINS_ENABLE EXP1_05_PIN
#define LCD_PINS_D4 EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_06_PIN
#define LCD_PINS_D4 EXP1_04_PIN
#elif ENABLED(WYH_L12864)
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! WYH_L12864 requires wiring modifications. See 'pins_BTT_SKR_V1_3.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.
* 2. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!)
* 3. Swap the LCD's MOSI (Pin9) and empty (Pin10) wires because Pin9 is open drain.
*
* !!! If you are unsure, ask for help! Your motherboard may be damaged in some circumstances !!!
*
* The WYH_L12864 connector plug:
*
* BEFORE AFTER
* ______ ______
* | 1 2 | (MOSI) (MOSI) |10 9 | --
* (BTN_ENC) | 3 4 | (SCK) (BTN_ENC) | 8 7 | (SCK)
* (BTN_EN1) 5 6 | (SID) (BTN_EN1) 6 5 | (SID)
* (BTN_EN2) | 7 8 | (CS) (BTN_EN2) | 4 3 | (CS)
* 5V | 9 10 | GND GND | 2 1 | 5V
* ------ ------
* LCD LCD
*/
#define BTN_EN1 EXP1_05_PIN
#define BTN_EN2 EXP1_07_PIN
#define BTN_ENC EXP1_03_PIN
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_06_PIN
#define DOGLCD_SCK EXP1_04_PIN
#define DOGLCD_MOSI EXP1_01_PIN
#define LCD_BACKLIGHT_PIN -1
#elif ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_09_PIN // (58) open-drain
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define BTN_ENC EXP1_02_PIN // (58) open-drain
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#elif HAS_ADC_BUTTONS
@@ -269,20 +308,20 @@
#elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
#define TFT_A0_PIN EXP1_03_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_A0_PIN EXP1_08_PIN
#define TFT_DC_PIN EXP1_08_PIN
#define TFT_CS_PIN EXP1_07_PIN
#define TFT_RESET_PIN EXP1_04_PIN
#define TFT_BACKLIGHT_PIN EXP1_03_PIN
#define TFT_RST_PIN EXP2_04_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_SCK_PIN EXP2_09_PIN
#define TFT_MISO_PIN EXP2_10_PIN
//#define TFT_RST_PIN EXP2_07_PIN
#define TFT_MOSI_PIN EXP2_06_PIN
#define TFT_SCK_PIN EXP2_02_PIN
#define TFT_MISO_PIN EXP2_01_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_ENC EXP1_09_PIN
#define BTN_EN2 EXP2_05_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_ENC EXP1_02_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
@@ -330,90 +369,90 @@
#elif IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS EXP2_08_PIN
#define TFTGLCD_CS EXP2_03_PIN
#endif
#define SD_DETECT_PIN EXP2_04_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#else // !CR10_STOCKDISPLAY
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 EXP2_08_PIN // (31) J3-2 & AUX-4
#define BTN_EN2 EXP2_06_PIN // (33) J3-4 & AUX-4
#define BTN_ENC EXP1_09_PIN // (58) open-drain
#define BTN_EN1 EXP2_03_PIN // (31) J3-2 & AUX-4
#define BTN_EN2 EXP2_05_PIN // (33) J3-4 & AUX-4
#define BTN_ENC EXP1_02_PIN // (58) open-drain
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define LCD_SDSS EXP2_07_PIN // (16) J3-7 & AUX-4
#define SD_DETECT_PIN EXP2_04_PIN // (49) (NOT 5V tolerant)
#define LCD_SDSS EXP2_04_PIN // (16) J3-7 & AUX-4
#define SD_DETECT_PIN EXP2_07_PIN // (49) (NOT 5V tolerant)
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_SCK EXP2_09_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_CS EXP1_03_PIN
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_SCK EXP2_02_PIN
#define DOGLCD_MOSI EXP2_06_PIN
#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXP1_05_PIN
#define RGB_LED_R_PIN EXP1_06_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXP1_04_PIN
#define RGB_LED_G_PIN EXP1_07_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXP1_03_PIN
#define RGB_LED_B_PIN EXP1_08_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXP1_05_PIN
#define NEOPIXEL_PIN EXP1_06_PIN
#endif
#else // !FYSETC_MINI_12864
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS EXP1_05_PIN
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_SCK EXP2_09_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_CS EXP1_06_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_SCK EXP2_02_PIN
#define DOGLCD_MOSI EXP2_06_PIN
#elif ENABLED(ENDER2_STOCKDISPLAY)
/**
* Creality Ender-2 display pinout
* -----
* 5V | 1 2 | GND
* (MOSI) P1_23 | 3 4 | P1_22 (LCD_CS)
* (LCD_A0) P1_21 | 5 6 P1_20 (BTN_EN2)
* (RESET) P1_19 | 7 8 | P1_18 (BTN_EN1)
* (BTN_ENC) P0_28 | 9 10| P1_30 (SCK)
* -----
* ------
* (SCK) P1_30 | 1 2 | P0_28 (BTN_ENC)
* (BTN_EN1) P1_18 | 3 4 | P1_19 (RESET)
* (BTN_EN2) P1_20 5 6 | P1_21 (LCD_A0)
* (LCD_CS) P1_22 | 7 8 | P1_23 (MOSI)
* GND | 9 10 | 5V
* ------
* EXP1
*/
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_09_PIN
#define DOGLCD_CS EXP1_04_PIN
#define DOGLCD_A0 EXP1_05_PIN
#define DOGLCD_SCK EXP1_10_PIN
#define DOGLCD_MOSI EXP1_03_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define BTN_ENC EXP1_02_PIN
#define DOGLCD_CS EXP1_07_PIN
#define DOGLCD_A0 EXP1_06_PIN
#define DOGLCD_SCK EXP1_01_PIN
#define DOGLCD_MOSI EXP1_08_PIN
#define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1
#endif
#if IS_ULTIPANEL
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_07_PIN
#define LCD_PINS_D7 EXP1_08_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
@@ -428,11 +467,11 @@
#endif // HAS_WIRED_LCD
#if NEED_TOUCH_PINS
#define TOUCH_CS_PIN EXP1_06_PIN
#define TOUCH_SCK_PIN EXP2_09_PIN
#define TOUCH_MOSI_PIN EXP2_05_PIN
#define TOUCH_MISO_PIN EXP2_10_PIN
#define TOUCH_INT_PIN EXP1_05_PIN
#define TOUCH_CS_PIN EXP1_05_PIN
#define TOUCH_SCK_PIN EXP2_02_PIN
#define TOUCH_MOSI_PIN EXP2_06_PIN
#define TOUCH_MISO_PIN EXP2_01_PIN
#define TOUCH_INT_PIN EXP1_06_PIN
#endif
/**

236
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View File

@@ -35,6 +35,8 @@
#define BOARD_CUSTOM_BUILD_FLAGS -DLPC_PINCFG_UART3_P4_28
#endif
#define USES_DIAG_PINS
//
// EEPROM
//
@@ -44,9 +46,9 @@
#endif
#if ENABLED(I2C_EEPROM)
#define MARLIN_EEPROM_SIZE 0x8000 // 32Kb
#define MARLIN_EEPROM_SIZE 0x8000 // 32K
#elif ENABLED(SDCARD_EEPROM_EMULATION)
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb
#define MARLIN_EEPROM_SIZE 0x800 // 2K
#endif
//
@@ -244,47 +246,49 @@
#endif
/** ------ ------
* 1.30 |10 9 | 0.28 0.17 |10 9 | 0.15
* 1.18 | 8 7 | 1.19 3.26 | 8 7 | 0.16
* 1.20 6 5 | 1.21 3.25 6 5 | 0.18
* 1.22 | 4 3 | 1.23 1.31 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | NC
* 1.30 | 1 2 | 0.28 0.17 | 1 2 | 0.15
* 1.18 | 3 4 | 1.19 3.26 | 3 4 | 0.16
* 1.20 5 6 | 1.21 3.25 5 6 | 0.18
* 1.22 | 7 8 | 1.23 1.31 | 7 8 | RESET
* GND | 9 10 | 5V GND | 9 10 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN P1_23
#define EXP1_04_PIN P1_22
#define EXP1_05_PIN P1_21
#define EXP1_06_PIN P1_20
#define EXP1_07_PIN P1_19
#define EXP1_08_PIN P1_18
#define EXP1_09_PIN P0_28
#define EXP1_10_PIN P1_30
#define EXP1_01_PIN P1_30
#define EXP1_02_PIN P0_28
#define EXP1_03_PIN P1_18
#define EXP1_04_PIN P1_19
#define EXP1_05_PIN P1_20
#define EXP1_06_PIN P1_21
#define EXP1_07_PIN P1_22
#define EXP1_08_PIN P1_23
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN P1_31
#define EXP2_05_PIN P0_18
#define EXP2_06_PIN P3_25
#define EXP2_07_PIN P0_16
#define EXP2_08_PIN P3_26
#define EXP2_09_PIN P0_15
#define EXP2_10_PIN P0_17
#define EXP2_01_PIN P0_17
#define EXP2_02_PIN P0_15
#define EXP2_03_PIN P3_26
#define EXP2_04_PIN P0_16
#define EXP2_05_PIN P3_25
#define EXP2_06_PIN P0_18
#define EXP2_07_PIN P1_31
#define EXP2_08_PIN -1 // RESET
#if EITHER(HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
// RET6 DWIN ENCODER LCD
#define BTN_ENC EXP1_06_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_04_PIN
#define BTN_ENC EXP1_05_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_07_PIN
#ifndef BEEPER_PIN
#define BEEPER_PIN EXP1_05_PIN
#define BEEPER_PIN EXP1_06_PIN
#endif
#elif HAS_WIRED_LCD && !BTT_MOTOR_EXPANSION
#elif HAS_WIRED_LCD
#if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING)
#error "CAUTION! ANET_FULL_GRAPHICS_LCD_ALT_WIRING requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue."
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ANET_FULL_GRAPHICS_LCD_ALT_WIRING requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.
@@ -296,181 +300,183 @@
*
* BEFORE AFTER
* ------ ------
* GND | 1 2 | 5V 5V | 1 2 | GND
* CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2
* SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1
* open | 7 8 | BTN_ENC open | 7 8 | BTN_ENC
* CLK | 9 10| BEEPER CLK | 9 10| BEEPER
* (BEEPER) | 1 2 | (CLK) (BEEPER) |10 9 | (CLK)
* (BTN_ENC) | 3 4 | -- (BTN_ENC) | 8 7 | --
* (BTN_EN1) 5 6 | (SID) (BTN_EN1) 6 5 | (SID)
* (BTN_EN2) | 7 8 | (CS) (BTN_EN2) | 4 3 | (CS)
* 5V | 9 10 | GND GND | 2 1 | 5V
* ------ ------
* LCD LCD
*/
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 EXP1_05_PIN
#define BTN_EN2 EXP1_04_PIN
#define BTN_ENC EXP1_10_PIN
#define BTN_EN1 EXP1_06_PIN
#define BTN_EN2 EXP1_07_PIN
#define BTN_ENC EXP1_01_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define BEEPER_PIN EXP1_03_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define BEEPER_PIN EXP1_08_PIN
#elif ENABLED(ANET_FULL_GRAPHICS_LCD)
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue."
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.
* 2. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!)
* 3. Rewire the CLK Signal (LCD Pin9) to LCD Pin7. (LCD Pin9 remains open because this pin is open drain.)
* 3. Rewire the CLK Signal (LCD Pin9) to LCD Pin7. (LCD Pin9 remains open because it is open drain.)
* 4. A wire is needed to connect the Reset switch at J3 (LCD Pin7) to EXP2 (Pin3) on the board.
*
* !!! If you are unsure, ask for help! Your motherboard may be damaged in some circumstances !!!
*
* The ANET_FULL_GRAPHICS_LCD connector plug:
*
* BEFORE AFTER
* ------ ------
* GND | 1 2 | 5V 5V | 1 2 | GND
* CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2
* SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1
* open | 7 8 | BTN_ENC CLK | 7 8 | BTN_ENC
* CLK | 9 10 | BEEPER open | 9 10 | BEEPER
* ------ ------
* LCD LCD
* BEFORE AFTER
* ------ ------
* (BEEPER) | 1 2 | (CLK) (BEEPER) |10 9 | --
* (BTN_ENC) | 3 4 | -- (BTN_ENC) | 8 7 | (CLK)
* (BTN_EN1) 5 6 | (SID) (BTN_EN1) 6 5 | (SID)
* (BTN_EN2) | 7 8 | (CS) (BTN_EN2) | 4 3 | (CS)
* 5V | 9 10 | GND GND | 2 1 | 5V
* ------ ------
* LCD LCD
*/
#define LCD_PINS_RS EXP1_03_PIN
#define LCD_PINS_RS EXP1_08_PIN
#define BTN_EN1 EXP1_06_PIN
#define BTN_EN2 EXP1_04_PIN
#define BTN_ENC EXP1_08_PIN
#define BTN_EN1 EXP1_05_PIN
#define BTN_EN2 EXP1_07_PIN
#define BTN_ENC EXP1_03_PIN
#define LCD_PINS_ENABLE EXP1_05_PIN
#define LCD_PINS_D4 EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_06_PIN
#define LCD_PINS_D4 EXP1_04_PIN
#define BEEPER_PIN EXP1_10_PIN
#define BEEPER_PIN EXP1_01_PIN
#elif ENABLED(CR10_STOCKDISPLAY)
#define BTN_ENC EXP1_09_PIN // (58) open-drain
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_ENC EXP1_02_PIN // (58) open-drain
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#elif ENABLED(ENDER2_STOCKDISPLAY)
/** Creality Ender-2 display pinout
* ------
* 5V | 1 2 | GND
* (MOSI) 1.23 | 3 4 | 1.22 (LCD_RS)
* (LCD_A0) 1.21 | 5 6 1.20 (BTN_EN2)
* RESET 1.19 | 7 8 | 1.18 (BTN_EN1)
* (BTN_ENC) 0.28 | 9 10 | 1.30 (SCK)
* (SCK) 1.30 | 1 2 | 0.28 (BTN_ENC)
* (BTN_EN1) 1.18 | 3 4 | 1.19 (RESET)
* (BTN_EN2) 1.20 5 6 | 1.21 (LCD_A0)
* (LCD_RS) 1.22 | 7 8 | 1.23 (MOSI)
* GND | 9 10 | 5V
* ------
* EXP1
*/
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_09_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define BTN_ENC EXP1_02_PIN
#define DOGLCD_CS EXP1_04_PIN
#define DOGLCD_A0 EXP1_05_PIN
#define DOGLCD_SCK EXP1_10_PIN
#define DOGLCD_MOSI EXP1_03_PIN
#define DOGLCD_CS EXP1_07_PIN
#define DOGLCD_A0 EXP1_06_PIN
#define DOGLCD_SCK EXP1_01_PIN
#define DOGLCD_MOSI EXP1_08_PIN
#define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1
#elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_A0_PIN EXP1_03_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_CS_PIN EXP1_07_PIN
#define TFT_A0_PIN EXP1_08_PIN
#define TFT_DC_PIN EXP1_08_PIN
#define TFT_MISO_PIN EXP2_01_PIN
#define TFT_BACKLIGHT_PIN EXP1_03_PIN
#define TFT_RESET_PIN EXP1_04_PIN
#define LCD_USE_DMA_SPI
#define TOUCH_INT_PIN EXP1_05_PIN
#define TOUCH_CS_PIN EXP1_06_PIN
#define TOUCH_INT_PIN EXP1_06_PIN
#define TOUCH_CS_PIN EXP1_05_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
// SPI 1
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_SCK_PIN EXP2_02_PIN
#define SD_MISO_PIN EXP2_01_PIN
#define SD_MOSI_PIN EXP2_06_PIN
#define TFT_BUFFER_SIZE 2400
#elif IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS EXP2_08_PIN
#define TFTGLCD_CS EXP2_03_PIN
#endif
#define SD_DETECT_PIN EXP2_04_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#else
#define BTN_ENC EXP1_09_PIN // (58) open-drain
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_ENC EXP1_02_PIN // (58) open-drain
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 EXP2_08_PIN // (31) J3-2 & AUX-4
#define BTN_EN2 EXP2_06_PIN // (33) J3-4 & AUX-4
#define BTN_EN1 EXP2_03_PIN // (31) J3-2 & AUX-4
#define BTN_EN2 EXP2_05_PIN // (33) J3-4 & AUX-4
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define LCD_SDSS EXP2_07_PIN // (16) J3-7 & AUX-4
#define LCD_SDSS EXP2_04_PIN // (16) J3-7 & AUX-4
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_SCK EXP2_09_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_CS EXP1_03_PIN
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_SCK EXP2_02_PIN
#define DOGLCD_MOSI EXP2_06_PIN
#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXP1_05_PIN
#define RGB_LED_R_PIN EXP1_06_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXP1_04_PIN
#define RGB_LED_G_PIN EXP1_07_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXP1_03_PIN
#define RGB_LED_B_PIN EXP1_08_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXP1_05_PIN
#define NEOPIXEL_PIN EXP1_06_PIN
#endif
#else // !FYSETC_MINI_12864
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS EXP1_05_PIN
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_SCK EXP2_09_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_CS EXP1_06_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_SCK EXP2_02_PIN
#define DOGLCD_MOSI EXP2_06_PIN
#define FORCE_SOFT_SPI
#endif
#if IS_ULTIPANEL
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_07_PIN
#define LCD_PINS_D7 EXP1_08_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN EXP1_03_PIN // Detect the presence of the encoder
#define BTN_ENC_EN EXP1_08_PIN // Detect the presence of the encoder
#endif
#endif

61
Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
View File

@@ -134,8 +134,8 @@
#define SD_SCK_PIN P0_15
#define SD_MISO_PIN P0_17
#define SD_MOSI_PIN P0_18
#define SD_SS_PIN EXP2_07_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#define SD_SS_PIN EXP2_04_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
@@ -150,59 +150,60 @@
#endif
#if ENABLED(BTT_MOTOR_EXPANSION)
/** ------ ------
* NC | 1 2 | GND NC | 1 2 | GND
* NC | 3 4 | M1EN M2EN | 3 4 | M3EN
* M1STP | 5 6 M1DIR M1RX | 5 6 M1DIAG
* M2DIR | 7 8 | M2STP M2RX | 7 8 | M2DIAG
* M3DIR | 9 10 | M3STP M3RX | 9 10 | M3DIAG
* ------ ------
* EXP2 EXP1
/**
* ------ ------
* (M3STP) | 1 2 | (M3DIR) (M3DIAG) | 1 2 | (M3RX)
* (M2STP) | 3 4 | (M2DIR) (M2DIAG) | 3 4 | (M2RX)
* (M1DIR) 5 6 | (M1STP) (M1DIAG) 5 6 | (M1RX)
* (M1EN) | 7 8 | -- (M3EN) | 7 8 | (M2EN)
* GND | 9 10 | -- GND | 9 10 | --
* ------ ------
* EXP2 EXP1
*
* NB In EXP_MOT_USE_EXP2_ONLY mode EXP1 is not used and M2EN and M3EN need to be jumpered to M1EN
*/
// M1 on Driver Expansion Module
#define E2_STEP_PIN EXP2_05_PIN
#define E2_DIR_PIN EXP2_06_PIN
#define E2_ENABLE_PIN EXP2_04_PIN
#define E2_STEP_PIN EXP2_06_PIN
#define E2_DIR_PIN EXP2_05_PIN
#define E2_ENABLE_PIN EXP2_07_PIN
#if !EXP_MOT_USE_EXP2_ONLY
#define E2_DIAG_PIN EXP1_06_PIN
#define E2_CS_PIN EXP1_05_PIN
#define E2_DIAG_PIN EXP1_05_PIN
#define E2_CS_PIN EXP1_06_PIN
#if HAS_TMC_UART
#define E2_SERIAL_TX_PIN EXP1_05_PIN
#define E2_SERIAL_TX_PIN EXP1_06_PIN
#define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
#endif
#endif
// M2 on Driver Expansion Module
#define E3_STEP_PIN EXP2_08_PIN
#define E3_DIR_PIN EXP2_07_PIN
#define E3_STEP_PIN EXP2_03_PIN
#define E3_DIR_PIN EXP2_04_PIN
#if !EXP_MOT_USE_EXP2_ONLY
#define E3_ENABLE_PIN EXP1_03_PIN
#define E3_DIAG_PIN EXP1_08_PIN
#define E3_CS_PIN EXP1_07_PIN
#define E3_ENABLE_PIN EXP1_08_PIN
#define E3_DIAG_PIN EXP1_03_PIN
#define E3_CS_PIN EXP1_04_PIN
#if HAS_TMC_UART
#define E3_SERIAL_TX_PIN EXP1_07_PIN
#define E3_SERIAL_TX_PIN EXP1_04_PIN
#define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
#endif
#else
#define E3_ENABLE_PIN EXP2_04_PIN
#define E3_ENABLE_PIN EXP2_07_PIN
#endif
// M3 on Driver Expansion Module
#define E4_STEP_PIN EXP2_10_PIN
#define E4_DIR_PIN EXP2_09_PIN
#define E4_STEP_PIN EXP2_01_PIN
#define E4_DIR_PIN EXP2_02_PIN
#if !EXP_MOT_USE_EXP2_ONLY
#define E4_ENABLE_PIN EXP1_04_PIN
#define E4_DIAG_PIN EXP1_10_PIN
#define E4_CS_PIN EXP1_09_PIN
#define E4_ENABLE_PIN EXP1_07_PIN
#define E4_DIAG_PIN EXP1_01_PIN
#define E4_CS_PIN EXP1_02_PIN
#if HAS_TMC_UART
#define E4_SERIAL_TX_PIN EXP1_09_PIN
#define E4_SERIAL_TX_PIN EXP1_02_PIN
#define E4_SERIAL_RX_PIN E4_SERIAL_TX_PIN
#endif
#else
#define E4_ENABLE_PIN EXP2_04_PIN
#define E4_ENABLE_PIN EXP2_07_PIN
#endif
#endif // BTT_MOTOR_EXPANSION

149
Marlin/src/pins/lpc1768/pins_EMOTRONIC.h Normal file
View File

@@ -0,0 +1,149 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* eMotion-Tech eMotronic pin assignments
*
* Board pins<->features assignments are based on the
* Micro-Delta Rework printer default connections.
*/
#include "env_validate.h"
#define BOARD_INFO_NAME "eMotronic"
#define BOARD_WEBSITE_URL "www.reprap-france.com/article/lemotronic-quesaco"
//
// Limit Switches
//
#define X_STOP_PIN P1_22 // S0
#define Y_STOP_PIN P1_23 // S1
#define Z_STOP_PIN P1_24 // S2
#define I_STOP_PIN P1_25 // S3
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN P0_26 // S4 (opto)
#endif
//
// Steppers
//
#define X_STEP_PIN P2_02 // M3
#define X_DIR_PIN P4_28
#define X_ENABLE_PIN P4_29
#define Y_STEP_PIN P2_01 // M2
#define Y_DIR_PIN P0_22
#define Y_ENABLE_PIN P0_21
#define Z_STEP_PIN P2_00 // M1
#define Z_DIR_PIN P3_26
#define Z_ENABLE_PIN P3_25
#define E0_STEP_PIN P2_03 // M4
#define E0_DIR_PIN P0_04
#define E0_ENABLE_PIN P0_05 // Correct!
#define E1_STEP_PIN P2_08 // M5
#define E1_DIR_PIN P0_20
#define E1_ENABLE_PIN P0_19
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_24_A1 // A1 (TH1)
#define TEMP_1_PIN P0_23_A0 // A0 (TH0)
#define TEMP_BED_PIN P0_25_A2 // A2 (TH2)
//
// Heaters / Fans
//
#define _H0_PIN P2_04 // (H0: 15A)
#define HEATER_BED_PIN P2_05 // (H1: 10A shared)
#define HEATER_0_PIN P2_06 // (H2: 10A shared)
#define HEATER_1_PIN P2_07 // (H3: 10A shared)
#define FAN_PIN P2_11 // (FAN0: 1A)
#define FAN1_PIN P2_13 // (FAN1: 1A)
//
// Extension ports
//
#define EXP1_01_PIN P0_03 // RX0
#define EXP1_02_PIN P0_02 // TX0
#define EXP1_03_PIN P1_30
#define EXP1_04_PIN P1_31
#define EXP1_05_PIN P0_17 // MISO0
#define EXP1_06_PIN P0_18 // MOSI0
#define EXP1_07_PIN P0_15 // SCK0
#define EXP1_08_PIN P0_16 // SSEL0
#define EXP1_09_PIN P0_27 // SDA0
#define EXP1_10_PIN P0_28 // SCL0
#define EXP2_01_PIN P0_10
#define EXP2_02_PIN P0_11
#define EXP2_03_PIN P0_00 // SDA1
#define EXP2_04_PIN P0_01 // SCL1
#define EXP2_05_PIN P1_28
#define EXP2_06_PIN P1_29
#define EXP2_07_PIN P1_26
#define EXP2_08_PIN P1_27
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#define SD_SCK_PIN P0_07
#define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#define SD_SS_PIN P0_06
#elif SD_CONNECTION_IS(LCD)
#define SD_SCK_PIN EXP1_07_PIN
#define SD_MISO_PIN EXP1_05_PIN
#define SD_MOSI_PIN EXP1_06_PIN
#define SD_SS_PIN EXP1_08_PIN
#define SD_DETECT_PIN EXP1_04_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
//
// LCD / Controller
//
#if ENABLED(EMOTION_TECH_LCD)
#define BEEPER_PIN EXP2_01_PIN
#define DOGLCD_A0 EXP2_06_PIN
#define DOGLCD_CS EXP2_04_PIN
#define DOGLCD_SCK EXP1_07_PIN
#define DOGLCD_MOSI EXP1_06_PIN
#define BTN_EN1 EXP2_07_PIN
#define BTN_EN2 EXP2_05_PIN
#define BTN_ENC EXP2_02_PIN
#endif

12
Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
View File

@@ -238,7 +238,7 @@
#define LCD_SDSS P0_28 // EXP2.4
#define LCD_PINS_ENABLE P0_18 // EXP1.3
#define LCD_PINS_D4 P0_15 // EXP1.5
#if ANY(VIKI2, miniVIKI)
#if EITHER(VIKI2, miniVIKI)
#define DOGLCD_SCK SD_SCK_PIN
#define DOGLCD_MOSI SD_MOSI_PIN
#endif
@@ -278,11 +278,7 @@
#endif
#elif ENABLED(MINIPANEL)
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
//#define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270
#endif
#endif // HAS_WIRED_LCD
@@ -363,9 +359,9 @@
* PWM1.4 P1_23 SDSS(SSEL0) J3-5 AUX-3
* PWM1.4 P2_03 Z_STEP_PIN
* PWM1.5 P1_24 X_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
* PWM1.5 P2_04 RAMPS_D9_PIN
* PWM1.5 P2_04 MOSFET_B_PIN
* PWM1.6 P1_26 Y_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
* PWM1.6 P2_05 RAMPS_D10_PIN
* PWM1.6 P2_05 MOSFET_A_PIN
*/
/**

142
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
View File

@@ -30,6 +30,8 @@
#define BOARD_INFO_NAME "MKS SGen-L"
#define BOARD_WEBSITE_URL "github.com/makerbase-mks/MKS-SGEN_L"
#define USES_DIAG_JUMPERS
//
// Servos
//
@@ -229,46 +231,46 @@
#define LED4_PIN P1_21
/** ------ ------
* (BEEPER) 1.31 |10 9 | 1.30 (BTN_ENC) (MISO) 0.8 |10 9 | 0.7 (SD_SCK)
* (LCD_EN) 0.18 | 8 7 | 0.16 (LCD_RS) (BTN_EN1) 3.25 | 8 7 | 0.28 (SD_CS2)
* (LCD_D4) 0.15 | 6 5 0.17 (LCD_D5) (BTN_EN2) 3.26 | 6 5 0.9 (SD_MOSI)
* (LCD_D6) 1.0 | 4 3 | 1.22 (LCD_D7) (SD_DETECT) 0.27 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | NC
* (BEEPER) 1.31 | 1 2 | 1.30 (BTN_ENC) (MISO) 0.8 | 1 2 | 0.7 (SD_SCK)
* (LCD_EN) 0.18 | 3 4 | 0.16 (LCD_RS) (BTN_EN1) 3.25 | 3 4 | 0.28 (SD_CS2)
* (LCD_D4) 0.15 5 6 | 0.17 (LCD_D5) (BTN_EN2) 3.26 5 6 | 0.9 (SD_MOSI)
* (LCD_D6) 1.0 | 7 8 | 1.22 (LCD_D7) (SD_DETECT) 0.27 | 7 8 | RESET
* GND | 9 10 | 5V GND | 9 10 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN P1_22
#define EXP1_04_PIN P1_00
#define EXP1_05_PIN P0_17
#define EXP1_06_PIN P0_15
#define EXP1_07_PIN P0_16
#define EXP1_08_PIN P0_18
#define EXP1_09_PIN P1_30
#define EXP1_10_PIN P1_31
#define EXP1_01_PIN P1_31
#define EXP1_02_PIN P1_30
#define EXP1_03_PIN P0_18
#define EXP1_04_PIN P0_16
#define EXP1_05_PIN P0_15
#define EXP1_06_PIN P0_17
#define EXP1_07_PIN P1_00
#define EXP1_08_PIN P1_22
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN P0_27
#define EXP2_05_PIN P0_09
#define EXP2_06_PIN P3_26
#define EXP2_07_PIN P0_28
#define EXP2_08_PIN P3_25
#define EXP2_09_PIN P0_07
#define EXP2_10_PIN P0_08
#define EXP2_01_PIN P0_08
#define EXP2_02_PIN P0_07
#define EXP2_03_PIN P3_25
#define EXP2_04_PIN P0_28
#define EXP2_05_PIN P3_26
#define EXP2_06_PIN P0_09
#define EXP2_07_PIN P0_27
#define EXP2_08_PIN -1 // RESET
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN EXP2_04_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#define SD_SCK_PIN EXP2_02_PIN
#define SD_MISO_PIN EXP2_01_PIN
#define SD_MOSI_PIN EXP2_06_PIN
#if SD_CONNECTION_IS(ONBOARD)
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#else
#define SD_SS_PIN EXP2_07_PIN
#define SD_SS_PIN EXP2_04_PIN
#endif
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
@@ -276,30 +278,30 @@
#if HAS_WIRED_LCD
#define BEEPER_PIN EXP1_10_PIN
#define BTN_ENC EXP1_09_PIN
#define BEEPER_PIN EXP1_01_PIN
#define BTN_ENC EXP1_02_PIN
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_A0_PIN EXP1_03_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_CS_PIN EXP1_07_PIN
#define TFT_A0_PIN EXP1_08_PIN
#define TFT_DC_PIN EXP1_08_PIN
#define TFT_MISO_PIN EXP2_01_PIN
#define TFT_BACKLIGHT_PIN EXP1_03_PIN
#define TFT_RESET_PIN EXP1_04_PIN
#define LCD_USE_DMA_SPI
#define TOUCH_INT_PIN EXP1_05_PIN
#define TOUCH_CS_PIN EXP1_06_PIN
#define TOUCH_INT_PIN EXP1_06_PIN
#define TOUCH_CS_PIN EXP1_05_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 2
@@ -314,8 +316,8 @@
#define TFT_QUEUE_SIZE 6144
#endif
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#elif IS_TFTGLCD_PANEL
@@ -323,74 +325,74 @@
#undef BTN_ENC
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS EXP2_08_PIN
#define TFTGLCD_CS EXP2_03_PIN
#endif
#else
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#define LCD_SDSS EXP2_07_PIN
#define LCD_SDSS EXP2_04_PIN
#if ENABLED(MKS_12864OLED_SSD1306)
#define LCD_PINS_DC EXP1_05_PIN
#define DOGLCD_CS EXP1_07_PIN
#define LCD_PINS_DC EXP1_06_PIN
#define DOGLCD_CS EXP1_04_PIN
#define DOGLCD_A0 LCD_PINS_DC
#define DOGLCD_SCK EXP1_06_PIN
#define DOGLCD_MOSI EXP1_08_PIN
#define DOGLCD_SCK EXP1_05_PIN
#define DOGLCD_MOSI EXP1_03_PIN
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_D7 EXP1_08_PIN
#define KILL_PIN -1 // NC
#else // !MKS_12864OLED_SSD1306
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_SCK EXP2_09_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_CS EXP1_03_PIN
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_SCK EXP2_02_PIN
#define DOGLCD_MOSI EXP2_06_PIN
#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXP1_05_PIN
#define RGB_LED_R_PIN EXP1_06_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXP1_04_PIN
#define RGB_LED_G_PIN EXP1_07_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXP1_03_PIN
#define RGB_LED_B_PIN EXP1_08_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXP1_05_PIN
#define NEOPIXEL_PIN EXP1_06_PIN
#endif
#else // !FYSETC_MINI_12864
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS EXP1_05_PIN
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_CS EXP1_06_PIN
#define DOGLCD_A0 EXP1_07_PIN
#endif
#if IS_ULTIPANEL
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_07_PIN
#define LCD_PINS_D7 EXP1_08_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder

105
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
View File

@@ -168,52 +168,35 @@
//#define ?? P0_03_A6 // A6 - ( 0) - RXD0 - J4-4 & AUX-1
#define FILWIDTH_PIN P0_02_A7 // A7 - ( 1) - TXD0 - J4-5 & AUX-1
//
// Augmentation for auto-assigning RAMPS plugs
//
#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
#if HAS_MULTI_HOTEND
#if TEMP_SENSOR_BED
#define IS_RAMPS_EEB
#else
#define IS_RAMPS_EEF
#endif
#elif TEMP_SENSOR_BED
#define IS_RAMPS_EFB
#else
#define IS_RAMPS_EFF
#endif
#endif
//
// Heaters / Fans
//
#ifndef MOSFET_A_PIN
#define MOSFET_A_PIN P2_05
#endif
#ifndef MOSFET_B_PIN
#define MOSFET_B_PIN P2_04
#endif
#ifndef MOSFET_C_PIN
#define MOSFET_C_PIN P2_07
#endif
#ifndef MOSFET_D_PIN
#define MOSFET_D_PIN -1
#endif
#ifndef RAMPS_D8_PIN
#define RAMPS_D8_PIN P2_07 // (8)
#endif
#ifndef RAMPS_D9_PIN
#define RAMPS_D9_PIN P2_04 // (9)
#endif
#ifndef RAMPS_D10_PIN
#define RAMPS_D10_PIN P2_05 // (10)
#endif
#define HEATER_0_PIN RAMPS_D10_PIN
#define HEATER_0_PIN MOSFET_A_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#define FAN1_PIN RAMPS_D8_PIN
#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
#define HEATER_BED_PIN RAMPS_D8_PIN
#if FET_ORDER_EFB // Hotend, Fan, Bed
#define HEATER_BED_PIN MOSFET_C_PIN
#elif FET_ORDER_EEF // Hotend, Hotend, Fan
#define HEATER_1_PIN MOSFET_B_PIN
#elif FET_ORDER_EEB // Hotend, Hotend, Bed
#define HEATER_1_PIN MOSFET_B_PIN
#define HEATER_BED_PIN MOSFET_C_PIN
#elif FET_ORDER_EFF // Hotend, Fan, Fan
#define FAN1_PIN MOSFET_C_PIN
#elif DISABLED(FET_ORDER_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
#define HEATER_BED_PIN MOSFET_C_PIN
#if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL)
#define FAN1_PIN MOSFET_D_PIN
#else
@@ -222,14 +205,14 @@
#endif
#ifndef FAN_PIN
#if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#if EITHER(FET_ORDER_EFB, FET_ORDER_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN MOSFET_B_PIN
#elif EITHER(FET_ORDER_EEF, FET_ORDER_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN MOSFET_C_PIN
#elif FET_ORDER_EEB // Hotend, Hotend, Bed
#define FAN_PIN P1_18 // (4) IO pin. Buffer needed
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#define FAN_PIN MOSFET_B_PIN
#endif
#endif
@@ -245,7 +228,7 @@
#define PS_ON_PIN P2_12 // (12)
#if !defined(TEMP_0_CS_PIN) && DISABLED(USE_ZMAX_PLUG)
#if !defined(TEMP_0_CS_PIN) && !(HAS_Z_AXIS && Z_HOME_DIR)
#define TEMP_0_CS_PIN P1_28
#endif
@@ -275,11 +258,13 @@
//
// Průša i3 MK2 Multiplexer Support
//
#if SERIAL_PORT != 0 && SERIAL_PORT_2 != 0
#define E_MUX0_PIN P0_03 // ( 0) Z_CS_PIN
#define E_MUX1_PIN P0_02 // ( 1) E0_CS_PIN
#if HAS_PRUSA_MMU1
#if SERIAL_PORT != 0 && SERIAL_PORT_2 != 0
#define E_MUX0_PIN P0_03 // ( 0) Z_CS_PIN
#define E_MUX1_PIN P0_02 // ( 1) E0_CS_PIN
#endif
#define E_MUX2_PIN P0_26 // (63) E1_CS_PIN
#endif
#define E_MUX2_PIN P0_26 // (63) E1_CS_PIN
/**
* LCD / Controller
@@ -322,7 +307,9 @@
#elif ENABLED(ZONESTAR_LCD)
#error "CAUTION! ZONESTAR_LCD on REARM requires wiring modifications. NB. ADCs are not 5V tolerant. Comment out this line to continue."
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD on REARM requires wiring modifications. NB. ADCs are not 5V tolerant. See 'pins_RAMPS_RE_ARM.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#elif IS_TFTGLCD_PANEL
@@ -364,9 +351,7 @@
//#define SHIFT_EN_PIN P1_22 // (41) J5-4 & AUX-4
#endif
#if ANY(VIKI2, miniVIKI)
//#define LCD_SCREEN_ROT_180
#if EITHER(VIKI2, miniVIKI)
#define DOGLCD_CS P0_16 // (16)
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_SCK SD_SCK_PIN
@@ -375,6 +360,8 @@
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
//#define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270
#else
#if ENABLED(FYSETC_MINI_12864)
@@ -423,11 +410,7 @@
#endif
#if ENABLED(MINIPANEL)
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
//#define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270
#endif
#endif // HAS_WIRED_LCD
@@ -484,14 +467,14 @@
* All Fast PWMs have a 50Hz rate.
*
* The following pins/signals use the direct method. All other pins use the
* the interrupt method. Note that SERVO2_PIN and RAMPS_D8_PIN use the
* the interrupt method. Note that SERVO2_PIN and MOSFET_C_PIN use the
* interrupt method.
*
* P1_20 (11) SERVO0_PIN
* P1_21 ( 6) SERVO1_PIN J5-1
* P0_18 ( 4) SERVO3_PIN 5V output
* *P2_04 ( 9) RAMPS_D9_PIN
* *P2_05 (10) RAMPS_D10_PIN
* *P2_04 ( 9) MOSFET_B_PIN
* *P2_05 (10) MOSFET_A_PIN
*
* * - If used as a heater driver then a Fast PWM is NOT assigned. If used as
* a fan driver then enabling FAST_PWM_FAN assigns a Fast PWM to it.