Initial commit. Unusable Marlin 2.0.5.3 core without any custimization.

2020-06-02 11:44:35 +02:00
commit 987c858ae4
1519 changed files with 1361431 additions and 0 deletions
--- a/Marlin/src/HAL/STM32/SoftwareSerial.h
+++ b/Marlin/src/HAL/STM32/SoftwareSerial.h
@@ -0,0 +1,114 @@
+/**
+ * SoftwareSerial.h (formerly NewSoftSerial.h)
+ *
+ * Multi-instance software serial library for Arduino/Wiring
+ * -- Interrupt-driven receive and other improvements by ladyada
+ *    (http://ladyada.net)
+ * -- Tuning, circular buffer, derivation from class Print/Stream,
+ *    multi-instance support, porting to 8MHz processors,
+ *    various optimizations, PROGMEM delay tables, inverse logic and
+ *    direct port writing by Mikal Hart (http://www.arduiniana.org)
+ * -- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
+ * -- 20MHz processor support by Garrett Mace (http://www.macetech.com)
+ * -- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * The latest version of this library can always be found at
+ * http://arduiniana.org.
+ */
+#pragma once
+
+#include <Arduino.h>
+
+/******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+#define _SS_MAX_RX_BUFF 64 // RX buffer size
+
+class SoftwareSerial : public Stream {
+  private:
+    // per object data
+    uint16_t _receivePin;
+    uint16_t _transmitPin;
+    GPIO_TypeDef *_receivePinPort;
+    uint32_t _receivePinNumber;
+    GPIO_TypeDef *_transmitPinPort;
+    uint32_t _transmitPinNumber;
+    uint32_t _speed;
+
+    uint16_t _buffer_overflow: 1;
+    uint16_t _inverse_logic: 1;
+    uint16_t _half_duplex: 1;
+    uint16_t _output_pending: 1;
+
+    unsigned char _receive_buffer[_SS_MAX_RX_BUFF];
+    volatile uint8_t _receive_buffer_tail;
+    volatile uint8_t _receive_buffer_head;
+
+    uint32_t delta_start = 0;
+
+    // static data
+    static HardwareTimer timer;
+    static const IRQn_Type timer_interrupt_number;
+    static uint32_t timer_interrupt_priority;
+    static SoftwareSerial *active_listener;
+    static SoftwareSerial *volatile active_out;
+    static SoftwareSerial *volatile active_in;
+    static int32_t tx_tick_cnt;
+    static volatile int32_t rx_tick_cnt;
+    static uint32_t tx_buffer;
+    static int32_t tx_bit_cnt;
+    static uint32_t rx_buffer;
+    static int32_t rx_bit_cnt;
+    static uint32_t cur_speed;
+
+    // private methods
+    void send();
+    void recv();
+    void setTX();
+    void setRX();
+    void setSpeed(uint32_t speed);
+    void setRXTX(bool input);
+    static void handleInterrupt(HardwareTimer *timer);
+
+  public:
+    // public methods
+
+    SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic=false);
+    virtual ~SoftwareSerial();
+    void begin(long speed);
+    bool listen();
+    void end();
+    bool isListening() { return active_listener == this; }
+    bool stopListening();
+    bool overflow() {
+      bool ret = _buffer_overflow;
+      if (ret) _buffer_overflow = false;
+      return ret;
+    }
+    int peek();
+
+    virtual size_t write(uint8_t byte);
+    virtual int read();
+    virtual int available();
+    virtual void flush();
+    operator bool() { return true; }
+
+    static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority);
+
+    using Print::write;
+};