wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Initial commit. Unusable Marlin 2.0.5.3 core without any custimization.

Browse Source
This commit is contained in:
Knutwurst
2020-06-02 11:44:35 +02:00
commit 987c858ae4
1519 changed files with 1361431 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

167
Marlin/src/gcode/config/M200-M205.cpp Executable file
View File

@@ -0,0 +1,167 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../MarlinCore.h"
#include "../../module/planner.h"
#if DISABLED(NO_VOLUMETRICS)
/**
* M200: Set filament diameter and set E axis units to cubic units
*
* T<extruder> - Optional extruder number. Current extruder if omitted.
* D<linear> - Diameter of the filament. Use "D0" to switch back to linear units on the E axis.
*/
void GcodeSuite::M200() {
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
if (parser.seen('D')) {
// setting any extruder filament size disables volumetric on the assumption that
// slicers either generate in extruder values as cubic mm or as as filament feeds
// for all extruders
const float dval = parser.value_linear_units();
if ( (parser.volumetric_enabled = (dval != 0)) )
planner.set_filament_size(target_extruder, dval);
}
planner.calculate_volumetric_multipliers();
}
#endif // !NO_VOLUMETRICS
/**
* M201: Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
*
* With multiple extruders use T to specify which one.
*/
void GcodeSuite::M201() {
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
LOOP_XYZE(i) {
if (parser.seen(axis_codes[i])) {
const uint8_t a = (i == E_AXIS ? uint8_t(E_AXIS_N(target_extruder)) : i);
planner.set_max_acceleration(a, parser.value_axis_units((AxisEnum)a));
}
}
}
/**
* M203: Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec
*
* With multiple extruders use T to specify which one.
*/
void GcodeSuite::M203() {
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
LOOP_XYZE(i)
if (parser.seen(axis_codes[i])) {
const uint8_t a = (i == E_AXIS ? uint8_t(E_AXIS_N(target_extruder)) : i);
planner.set_max_feedrate(a, parser.value_axis_units((AxisEnum)a));
}
}
/**
* M204: Set Accelerations in units/sec^2 (M204 P1200 R3000 T3000)
*
* P = Printing moves
* R = Retract only (no X, Y, Z) moves
* T = Travel (non printing) moves
*/
void GcodeSuite::M204() {
if (!parser.seen("PRST")) {
SERIAL_ECHOPAIR("Acceleration: P", planner.settings.acceleration);
SERIAL_ECHOPAIR(" R", planner.settings.retract_acceleration);
SERIAL_ECHOLNPAIR_P(SP_T_STR, planner.settings.travel_acceleration);
}
else {
//planner.synchronize();
// 'S' for legacy compatibility. Should NOT BE USED for new development
if (parser.seenval('S')) planner.settings.travel_acceleration = planner.settings.acceleration = parser.value_linear_units();
if (parser.seenval('P')) planner.settings.acceleration = parser.value_linear_units();
if (parser.seenval('R')) planner.settings.retract_acceleration = parser.value_linear_units();
if (parser.seenval('T')) planner.settings.travel_acceleration = parser.value_linear_units();
}
}
/**
* M205: Set Advanced Settings
*
* B = Min Segment Time (µs)
* S = Min Feed Rate (units/s)
* T = Min Travel Feed Rate (units/s)
* X = Max X Jerk (units/sec^2)
* Y = Max Y Jerk (units/sec^2)
* Z = Max Z Jerk (units/sec^2)
* E = Max E Jerk (units/sec^2)
* J = Junction Deviation (mm) (If not using CLASSIC_JERK)
*/
void GcodeSuite::M205() {
#if DISABLED(CLASSIC_JERK)
#define J_PARAM "J"
#else
#define J_PARAM
#endif
#if HAS_CLASSIC_JERK
#define XYZE_PARAM "XYZE"
#else
#define XYZE_PARAM
#endif
if (!parser.seen("BST" J_PARAM XYZE_PARAM)) return;
//planner.synchronize();
if (parser.seen('B')) planner.settings.min_segment_time_us = parser.value_ulong();
if (parser.seen('S')) planner.settings.min_feedrate_mm_s = parser.value_linear_units();
if (parser.seen('T')) planner.settings.min_travel_feedrate_mm_s = parser.value_linear_units();
#if DISABLED(CLASSIC_JERK)
if (parser.seen('J')) {
const float junc_dev = parser.value_linear_units();
if (WITHIN(junc_dev, 0.01f, 0.3f)) {
planner.junction_deviation_mm = junc_dev;
#if ENABLED(LIN_ADVANCE)
planner.recalculate_max_e_jerk();
#endif
}
else
SERIAL_ERROR_MSG("?J out of range (0.01 to 0.3)");
}
#endif
#if HAS_CLASSIC_JERK
if (parser.seen('X')) planner.set_max_jerk(X_AXIS, parser.value_linear_units());
if (parser.seen('Y')) planner.set_max_jerk(Y_AXIS, parser.value_linear_units());
if (parser.seen('Z')) {
planner.set_max_jerk(Z_AXIS, parser.value_linear_units());
#if HAS_MESH && DISABLED(LIMITED_JERK_EDITING)
if (planner.max_jerk.z <= 0.1f)
SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses.");
#endif
}
#if HAS_CLASSIC_E_JERK
if (parser.seen('E')) planner.set_max_jerk(E_AXIS, parser.value_linear_units());
#endif
#endif
}

105
Marlin/src/gcode/config/M217.cpp Executable file
View File

@@ -0,0 +1,105 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfigPre.h"
#if EXTRUDERS > 1
#include "../gcode.h"
#include "../../module/tool_change.h"
#include "../../MarlinCore.h" // for SP_X_STR, etc.
extern const char SP_X_STR[], SP_Y_STR[], SP_Z_STR[];
void M217_report(const bool eeprom=false) {
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
serialprintPGM(eeprom ? PSTR(" M217") : PSTR("Toolchange:"));
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPAIR_P(SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime));
SERIAL_ECHOPAIR_P(SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed));
#if ENABLED(TOOLCHANGE_PARK)
SERIAL_ECHOPAIR_P(SP_X_STR, LINEAR_UNIT(toolchange_settings.change_point.x));
SERIAL_ECHOPAIR_P(SP_Y_STR, LINEAR_UNIT(toolchange_settings.change_point.y));
#endif
#else
UNUSED(eeprom);
#endif
SERIAL_ECHOPAIR_P(SP_Z_STR, LINEAR_UNIT(toolchange_settings.z_raise));
SERIAL_EOL();
}
/**
* M217 - Set SINGLENOZZLE toolchange parameters
*
* S[linear] Swap length
* E[linear] Purge length
* P[linear/m] Prime speed
* R[linear/m] Retract speed
* X[linear] Park X (Requires TOOLCHANGE_PARK)
* Y[linear] Park Y (Requires TOOLCHANGE_PARK)
* Z[linear] Z Raise
*/
void GcodeSuite::M217() {
#define SPR_PARAM
#define XY_PARAM
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#undef SPR_PARAM
#define SPR_PARAM "SPRE"
static constexpr float max_extrude =
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
EXTRUDE_MAXLENGTH
#else
500
#endif
;
if (parser.seenval('S')) { const float v = parser.value_linear_units(); toolchange_settings.swap_length = constrain(v, 0, max_extrude); }
if (parser.seenval('E')) { const float v = parser.value_linear_units(); toolchange_settings.extra_prime = constrain(v, 0, max_extrude); }
if (parser.seenval('P')) { const int16_t v = parser.value_linear_units(); toolchange_settings.prime_speed = constrain(v, 10, 5400); }
if (parser.seenval('R')) { const int16_t v = parser.value_linear_units(); toolchange_settings.retract_speed = constrain(v, 10, 5400); }
#endif
#if ENABLED(TOOLCHANGE_PARK)
#undef XY_PARAM
#define XY_PARAM "XY"
if (parser.seenval('X')) { toolchange_settings.change_point.x = parser.value_linear_units(); }
if (parser.seenval('Y')) { toolchange_settings.change_point.y = parser.value_linear_units(); }
#endif
if (parser.seenval('Z')) { toolchange_settings.z_raise = parser.value_linear_units(); }
if (!parser.seen(SPR_PARAM XY_PARAM "Z")) M217_report();
}
#endif // EXTRUDERS > 1

71
Marlin/src/gcode/config/M218.cpp Executable file
View File

@@ -0,0 +1,71 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_HOTEND_OFFSET
#include "../gcode.h"
#include "../../module/motion.h"
#if ENABLED(DELTA)
#include "../../module/planner.h"
#endif
/**
* M218 - set hotend offset (in linear units)
*
* T<tool>
* X<xoffset>
* Y<yoffset>
* Z<zoffset>
*/
void GcodeSuite::M218() {
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
if (parser.seenval('X')) hotend_offset[target_extruder].x = parser.value_linear_units();
if (parser.seenval('Y')) hotend_offset[target_extruder].y = parser.value_linear_units();
if (parser.seenval('Z')) hotend_offset[target_extruder].z = parser.value_linear_units();
if (!parser.seen("XYZ")) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM(STR_HOTEND_OFFSET);
HOTEND_LOOP() {
SERIAL_CHAR(' ');
SERIAL_ECHO(hotend_offset[e].x);
SERIAL_CHAR(',');
SERIAL_ECHO(hotend_offset[e].y);
SERIAL_CHAR(',');
SERIAL_ECHO_F(hotend_offset[e].z, 3);
}
SERIAL_EOL();
}
#if ENABLED(DELTA)
if (target_extruder == active_extruder)
do_blocking_move_to_xy(current_position, planner.settings.max_feedrate_mm_s[X_AXIS]);
#endif
}
#endif // HAS_HOTEND_OFFSET

53
Marlin/src/gcode/config/M220.cpp Executable file
View File

@@ -0,0 +1,53 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../module/motion.h"
/**
* M220: Set speed percentage factor, aka "Feed Rate"
*
* Parameters
* S<percent> : Set the feed rate percentage factor
*
* Report the current speed percentage factor if no parameter is specified
*
* With PRUSA_MMU2...
* B : Flag to back up the current factor
* R : Flag to restore the last-saved factor
*/
void GcodeSuite::M220() {
#if ENABLED(PRUSA_MMU2)
static int16_t backup_feedrate_percentage = 100;
if (parser.seen('B')) backup_feedrate_percentage = feedrate_percentage;
if (parser.seen('R')) feedrate_percentage = backup_feedrate_percentage;
#endif
if (parser.seenval('S')) feedrate_percentage = parser.value_int();
if (!parser.seen_any()) {
SERIAL_ECHOPAIR("FR:", feedrate_percentage);
SERIAL_CHAR('%');
SERIAL_EOL();
}
}

49
Marlin/src/gcode/config/M221.cpp Executable file
View File

@@ -0,0 +1,49 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../module/planner.h"
#if EXTRUDERS
/**
* M221: Set extrusion percentage (M221 T0 S95)
*/
void GcodeSuite::M221() {
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
if (parser.seenval('S')) {
planner.flow_percentage[target_extruder] = parser.value_int();
planner.refresh_e_factor(target_extruder);
}
else {
SERIAL_ECHO_START();
SERIAL_CHAR('E', '0' + target_extruder);
SERIAL_ECHOPAIR(" Flow: ", planner.flow_percentage[target_extruder]);
SERIAL_CHAR('%');
SERIAL_EOL();
}
}
#endif // EXTRUDERS

61
Marlin/src/gcode/config/M281.cpp Executable file
View File

@@ -0,0 +1,61 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(EDITABLE_SERVO_ANGLES)
#include "../gcode.h"
#include "../../module/servo.h"
void GcodeSuite::M281() {
if (!parser.seenval('P')) return;
const int servo_index = parser.value_int();
if (WITHIN(servo_index, 0, NUM_SERVOS - 1)) {
#if ENABLED(BLTOUCH)
if (servo_index == Z_PROBE_SERVO_NR) {
SERIAL_ERROR_MSG("BLTouch angles can't be changed.");
return;
}
#endif
bool angle_change = false;
if (parser.seen('L')) {
servo_angles[servo_index][0] = parser.value_int();
angle_change = true;
}
if (parser.seen('U')) {
servo_angles[servo_index][1] = parser.value_int();
angle_change = true;
}
if (!angle_change) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" Servo ", servo_index,
" L", servo_angles[servo_index][0],
" U", servo_angles[servo_index][1]);
}
}
else {
SERIAL_ERROR_START();
SERIAL_ECHOLNPAIR("Servo ", servo_index, " out of range");
}
}
#endif // EDITABLE_SERVO_ANGLES

88
Marlin/src/gcode/config/M301.cpp Executable file
View File

@@ -0,0 +1,88 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(PIDTEMP)
#include "../gcode.h"
#include "../../module/temperature.h"
/**
* M301: Set PID parameters P I D (and optionally C, L)
*
* P[float] Kp term
* I[float] Ki term (unscaled)
* D[float] Kd term (unscaled)
*
* With PID_EXTRUSION_SCALING:
*
* C[float] Kc term
* L[int] LPQ length
*
* With PID_FAN_SCALING:
*
* F[float] Kf term
*/
void GcodeSuite::M301() {
// multi-extruder PID patch: M301 updates or prints a single extruder's PID values
// default behavior (omitting E parameter) is to update for extruder 0 only
const uint8_t e = parser.byteval('E'); // extruder being updated
if (e < HOTENDS) { // catch bad input value
if (parser.seen('P')) PID_PARAM(Kp, e) = parser.value_float();
if (parser.seen('I')) PID_PARAM(Ki, e) = scalePID_i(parser.value_float());
if (parser.seen('D')) PID_PARAM(Kd, e) = scalePID_d(parser.value_float());
#if ENABLED(PID_EXTRUSION_SCALING)
if (parser.seen('C')) PID_PARAM(Kc, e) = parser.value_float();
if (parser.seenval('L')) thermalManager.lpq_len = parser.value_int();
NOMORE(thermalManager.lpq_len, LPQ_MAX_LEN);
NOLESS(thermalManager.lpq_len, 0);
#endif
#if ENABLED(PID_FAN_SCALING)
if (parser.seen('F')) PID_PARAM(Kf, e) = parser.value_float();
#endif
thermalManager.updatePID();
SERIAL_ECHO_START();
#if ENABLED(PID_PARAMS_PER_HOTEND)
SERIAL_ECHOPAIR(" e:", e); // specify extruder in serial output
#endif
SERIAL_ECHOPAIR(" p:", PID_PARAM(Kp, e),
" i:", unscalePID_i(PID_PARAM(Ki, e)),
" d:", unscalePID_d(PID_PARAM(Kd, e)));
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR(" c:", PID_PARAM(Kc, e));
#endif
#if ENABLED(PID_FAN_SCALING)
SERIAL_ECHOPAIR(" f:", PID_PARAM(Kf, e));
#endif
SERIAL_EOL();
}
else
SERIAL_ERROR_MSG(STR_INVALID_EXTRUDER);
}
#endif // PIDTEMP

63
Marlin/src/gcode/config/M302.cpp Executable file
View File

@@ -0,0 +1,63 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(PREVENT_COLD_EXTRUSION)
#include "../gcode.h"
#include "../../module/temperature.h"
/**
* M302: Allow cold extrudes, or set the minimum extrude temperature
*
* S<temperature> sets the minimum extrude temperature
* P<bool> enables (1) or disables (0) cold extrusion
*
* Examples:
*
* M302 ; report current cold extrusion state
* M302 P0 ; enable cold extrusion checking
* M302 P1 ; disables cold extrusion checking
* M302 S0 ; always allow extrusion (disables checking)
* M302 S170 ; only allow extrusion above 170
* M302 S170 P1 ; set min extrude temp to 170 but leave disabled
*/
void GcodeSuite::M302() {
const bool seen_S = parser.seen('S');
if (seen_S) {
thermalManager.extrude_min_temp = parser.value_celsius();
thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0);
}
if (parser.seen('P'))
thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0) || parser.value_bool();
else if (!seen_S) {
// Report current state
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Cold extrudes are ");
serialprintPGM(thermalManager.allow_cold_extrude ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOLNPAIR("abled (min temp ", thermalManager.extrude_min_temp, "C)");
}
}
#endif // PREVENT_COLD_EXTRUSION

48
Marlin/src/gcode/config/M304.cpp Executable file
View File

@@ -0,0 +1,48 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(PIDTEMPBED)
#include "../gcode.h"
#include "../../module/temperature.h"
/**
* M304 - Set and/or Report the current Bed PID values
*
* P<pval> - Set the P value
* I<ival> - Set the I value
* D<dval> - Set the D value
*/
void GcodeSuite::M304() {
if (parser.seen('P')) thermalManager.temp_bed.pid.Kp = parser.value_float();
if (parser.seen('I')) thermalManager.temp_bed.pid.Ki = scalePID_i(parser.value_float());
if (parser.seen('D')) thermalManager.temp_bed.pid.Kd = scalePID_d(parser.value_float());
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" p:", thermalManager.temp_bed.pid.Kp,
" i:", unscalePID_i(thermalManager.temp_bed.pid.Ki),
" d:", unscalePID_d(thermalManager.temp_bed.pid.Kd));
}
#endif // PIDTEMPBED

81
Marlin/src/gcode/config/M305.cpp Executable file
View File

@@ -0,0 +1,81 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_USER_THERMISTORS
#include "../gcode.h"
#include "../../module/temperature.h"
/**
* M305: Set (or report) custom thermistor parameters
*
* P[index] Thermistor table index
* R[ohms] Pullup resistor value
* T[ohms] Resistance at 25C
* B[beta] Thermistor "beta" value
* C[coeff] Steinhart-Hart Coefficient 'C'
*
* Format: M305 P[tbl_index] R[pullup_resistor_val] T[therm_25C_resistance] B[therm_beta] C[Steinhart_Hart_C_coeff]
*
* Examples: M305 P0 R4700 T100000 B3950 C0.0
* M305 P0 R4700
* M305 P0 T100000
* M305 P0 B3950
* M305 P0 C0.0
*/
void GcodeSuite::M305() {
const int8_t t_index = parser.intval('P', -1);
const bool do_set = parser.seen("BCRT");
// A valid P index is required
if (t_index >= (USER_THERMISTORS) || (do_set && t_index < 0)) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("!Invalid index. (0 <= P <= ", int(USER_THERMISTORS - 1), ")");
}
else if (do_set) {
if (parser.seen('R')) // Pullup resistor value
if (!thermalManager.set_pull_up_res(t_index, parser.value_float()))
SERIAL_ECHO_MSG("!Invalid series resistance. (0 < R < 1000000)");
if (parser.seen('T')) // Resistance at 25C
if (!thermalManager.set_res25(t_index, parser.value_float()))
SERIAL_ECHO_MSG("!Invalid 25C resistance. (0 < T < 10000000)");
if (parser.seen('B')) // Beta value
if (!thermalManager.set_beta(t_index, parser.value_float()))
SERIAL_ECHO_MSG("!Invalid beta. (0 < B < 1000000)");
if (parser.seen('C')) // Steinhart-Hart C coefficient
if (!thermalManager.set_sh_coeff(t_index, parser.value_float()))
SERIAL_ECHO_MSG("!Invalid Steinhart-Hart C coeff. (-0.01 < C < +0.01)");
} // If not setting then report parameters
else if (t_index < 0) { // ...all user thermistors
LOOP_L_N(i, USER_THERMISTORS)
thermalManager.log_user_thermistor(i);
}
else // ...one user thermistor
thermalManager.log_user_thermistor(t_index);
}
#endif // HAS_USER_THERMISTORS

385
Marlin/src/gcode/config/M43.cpp Executable file
View File

@@ -0,0 +1,385 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(PINS_DEBUGGING)
#include "../gcode.h"
#include "../../MarlinCore.h" // for pin_is_protected
#include "../../pins/pinsDebug.h"
#include "../../module/endstops.h"
#if HAS_Z_SERVO_PROBE
#include "../../module/probe.h"
#include "../../module/servo.h"
#endif
#if ENABLED(BLTOUCH)
#include "../../feature/bltouch.h"
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
#include "../../feature/host_actions.h"
#endif
#if ENABLED(EXTENSIBLE_UI)
#include "../../lcd/extui/ui_api.h"
#endif
#ifndef GET_PIN_MAP_PIN_M43
#define GET_PIN_MAP_PIN_M43(Q) GET_PIN_MAP_PIN(Q)
#endif
inline void toggle_pins() {
const bool ignore_protection = parser.boolval('I');
const int repeat = parser.intval('R', 1),
start = PARSED_PIN_INDEX('S', 0),
end = PARSED_PIN_INDEX('L', NUM_DIGITAL_PINS - 1),
wait = parser.intval('W', 500);
LOOP_S_LE_N(i, start, end) {
pin_t pin = GET_PIN_MAP_PIN_M43(i);
if (!VALID_PIN(pin)) continue;
if (M43_NEVER_TOUCH(i) || (!ignore_protection && pin_is_protected(pin))) {
report_pin_state_extended(pin, ignore_protection, true, PSTR("Untouched "));
SERIAL_EOL();
}
else {
watchdog_refresh();
report_pin_state_extended(pin, ignore_protection, true, PSTR("Pulsing "));
#ifdef __STM32F1__
const auto prior_mode = _GET_MODE(i);
#else
const bool prior_mode = GET_PINMODE(pin);
#endif
#if AVR_AT90USB1286_FAMILY // Teensy IDEs don't know about these pins so must use FASTIO
if (pin == TEENSY_E2) {
SET_OUTPUT(TEENSY_E2);
for (int16_t j = 0; j < repeat; j++) {
WRITE(TEENSY_E2, LOW); safe_delay(wait);
WRITE(TEENSY_E2, HIGH); safe_delay(wait);
WRITE(TEENSY_E2, LOW); safe_delay(wait);
}
}
else if (pin == TEENSY_E3) {
SET_OUTPUT(TEENSY_E3);
for (int16_t j = 0; j < repeat; j++) {
WRITE(TEENSY_E3, LOW); safe_delay(wait);
WRITE(TEENSY_E3, HIGH); safe_delay(wait);
WRITE(TEENSY_E3, LOW); safe_delay(wait);
}
}
else
#endif
{
pinMode(pin, OUTPUT);
for (int16_t j = 0; j < repeat; j++) {
watchdog_refresh(); extDigitalWrite(pin, 0); safe_delay(wait);
watchdog_refresh(); extDigitalWrite(pin, 1); safe_delay(wait);
watchdog_refresh(); extDigitalWrite(pin, 0); safe_delay(wait);
watchdog_refresh();
}
}
#ifdef __STM32F1__
_SET_MODE(i, prior_mode);
#else
pinMode(pin, prior_mode);
#endif
}
SERIAL_EOL();
}
SERIAL_ECHOLNPGM("Done.");
} // toggle_pins
inline void servo_probe_test() {
#if !(NUM_SERVOS > 0 && HAS_SERVO_0)
SERIAL_ERROR_MSG("SERVO not set up.");
#elif !HAS_Z_SERVO_PROBE
SERIAL_ERROR_MSG("Z_PROBE_SERVO_NR not set up.");
#else // HAS_Z_SERVO_PROBE
const uint8_t probe_index = parser.byteval('P', Z_PROBE_SERVO_NR);
SERIAL_ECHOLNPAIR("Servo probe test\n"
". using index: ", int(probe_index),
", deploy angle: ", servo_angles[probe_index][0],
", stow angle: ", servo_angles[probe_index][1]
);
bool deploy_state = false, stow_state;
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#define PROBE_TEST_PIN Z_MIN_PIN
constexpr bool probe_inverting = Z_MIN_ENDSTOP_INVERTING;
SERIAL_ECHOLNPAIR(". Probe Z_MIN_PIN: ", int(PROBE_TEST_PIN));
SERIAL_ECHOPGM(". Z_MIN_ENDSTOP_INVERTING: ");
#else
#define PROBE_TEST_PIN Z_MIN_PROBE_PIN
constexpr bool probe_inverting = Z_MIN_PROBE_ENDSTOP_INVERTING;
SERIAL_ECHOLNPAIR(". Probe Z_MIN_PROBE_PIN: ", int(PROBE_TEST_PIN));
SERIAL_ECHOPGM( ". Z_MIN_PROBE_ENDSTOP_INVERTING: ");
#endif
serialprint_truefalse(probe_inverting);
SERIAL_EOL();
SET_INPUT_PULLUP(PROBE_TEST_PIN);
// First, check for a probe that recognizes an advanced BLTouch sequence.
// In addition to STOW and DEPLOY, it uses SW MODE (and RESET in the beginning)
// to see if this is one of the following: BLTOUCH Classic 1.2, 1.3, or
// BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1. But only if the user has actually
// configured a BLTouch as being present. If the user has not configured this,
// the BLTouch will be detected in the last phase of these tests (see further on).
bool blt = false;
// This code will try to detect a BLTouch probe or clone
#if ENABLED(BLTOUCH)
SERIAL_ECHOLNPGM(". Check for BLTOUCH");
bltouch._reset();
bltouch._stow();
if (probe_inverting == READ(PROBE_TEST_PIN)) {
bltouch._set_SW_mode();
if (probe_inverting != READ(PROBE_TEST_PIN)) {
bltouch._deploy();
if (probe_inverting == READ(PROBE_TEST_PIN)) {
bltouch._stow();
SERIAL_ECHOLNPGM("= BLTouch Classic 1.2, 1.3, Smart 1.0, 2.0, 2.2, 3.0, 3.1 detected.");
// Check for a 3.1 by letting the user trigger it, later
blt = true;
}
}
}
#endif
// The following code is common to all kinds of servo probes.
// Since it could be a real servo or a BLTouch (any kind) or a clone,
// use only "common" functions - i.e. SERVO_MOVE. No bltouch.xxxx stuff.
// If it is already recognised as a being a BLTouch, no need for this test
if (!blt) {
// DEPLOY and STOW 4 times and see if the signal follows
// Then it is a mechanical switch
uint8_t i = 0;
SERIAL_ECHOLNPGM(". Deploy & stow 4 times");
do {
MOVE_SERVO(probe_index, servo_angles[Z_PROBE_SERVO_NR][0]); // Deploy
safe_delay(500);
deploy_state = READ(PROBE_TEST_PIN);
MOVE_SERVO(probe_index, servo_angles[Z_PROBE_SERVO_NR][1]); // Stow
safe_delay(500);
stow_state = READ(PROBE_TEST_PIN);
} while (++i < 4);
if (probe_inverting != deploy_state) SERIAL_ECHOLNPGM("WARNING: INVERTING setting probably backwards.");
if (deploy_state != stow_state) {
SERIAL_ECHOLNPGM("= Mechanical Switch detected");
if (deploy_state) {
SERIAL_ECHOLNPAIR(" DEPLOYED state: HIGH (logic 1)",
" STOWED (triggered) state: LOW (logic 0)");
}
else {
SERIAL_ECHOLNPAIR(" DEPLOYED state: LOW (logic 0)",
" STOWED (triggered) state: HIGH (logic 1)");
}
#if ENABLED(BLTOUCH)
SERIAL_ECHOLNPGM("FAIL: BLTOUCH enabled - Set up this device as a Servo Probe with INVERTING set to 'true'.");
#endif
return;
}
}
// Ask the user for a trigger event and measure the pulse width.
MOVE_SERVO(probe_index, servo_angles[Z_PROBE_SERVO_NR][0]); // Deploy
safe_delay(500);
SERIAL_ECHOLNPGM("** Please trigger probe within 30 sec **");
uint16_t probe_counter = 0;
// Wait 30 seconds for user to trigger probe
for (uint16_t j = 0; j < 500 * 30 && probe_counter == 0 ; j++) {
safe_delay(2);
if (0 == j % (500 * 1)) gcode.reset_stepper_timeout(); // Keep steppers powered
if (deploy_state != READ(PROBE_TEST_PIN)) { // probe triggered
for (probe_counter = 0; probe_counter < 15 && deploy_state != READ(PROBE_TEST_PIN); ++probe_counter) safe_delay(2);
SERIAL_ECHOPGM(". Pulse width");
if (probe_counter == 15)
SERIAL_ECHOLNPGM(": 30ms or more");
else
SERIAL_ECHOLNPAIR(" (+/- 4ms): ", probe_counter * 2);
if (probe_counter >= 4) {
if (probe_counter == 15) {
if (blt) SERIAL_ECHOPGM("= BLTouch V3.1");
else SERIAL_ECHOPGM("= Z Servo Probe");
}
else SERIAL_ECHOPGM("= BLTouch pre V3.1 (or compatible)");
SERIAL_ECHOLNPGM(" detected.");
}
else SERIAL_ECHOLNPGM("FAIL: Noise detected - please re-run test");
MOVE_SERVO(probe_index, servo_angles[Z_PROBE_SERVO_NR][1]); // Stow
return;
}
}
if (!probe_counter) SERIAL_ECHOLNPGM("FAIL: No trigger detected");
#endif // HAS_Z_SERVO_PROBE
} // servo_probe_test
/**
* M43: Pin debug - report pin state, watch pins, toggle pins and servo probe test/report
*
* M43 - report name and state of pin(s)
* P<pin> Pin to read or watch. If omitted, reads all pins.
* I Flag to ignore Marlin's pin protection.
*
* M43 W - Watch pins -reporting changes- until reset, click, or M108.
* P<pin> Pin to read or watch. If omitted, read/watch all pins.
* I Flag to ignore Marlin's pin protection.
*
* M43 E<bool> - Enable / disable background endstop monitoring
* - Machine continues to operate
* - Reports changes to endstops
* - Toggles LED_PIN when an endstop changes
* - Cannot reliably catch the 5mS pulse from BLTouch type probes
*
* M43 T - Toggle pin(s) and report which pin is being toggled
* S<pin> - Start Pin number. If not given, will default to 0
* L<pin> - End Pin number. If not given, will default to last pin defined for this board
* I<bool> - Flag to ignore Marlin's pin protection. Use with caution!!!!
* R - Repeat pulses on each pin this number of times before continueing to next pin
* W - Wait time (in miliseconds) between pulses. If not given will default to 500
*
* M43 S - Servo probe test
* P<index> - Probe index (optional - defaults to 0
*/
void GcodeSuite::M43() {
// 'T' must be first. It uses 'S' and 'E' differently.
if (parser.seen('T')) return toggle_pins();
// 'E' Enable or disable endstop monitoring and return
if (parser.seen('E')) {
endstops.monitor_flag = parser.value_bool();
SERIAL_ECHOPGM("endstop monitor ");
serialprintPGM(endstops.monitor_flag ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOLNPGM("abled");
return;
}
// 'S' Run servo probe test and return
if (parser.seen('S')) return servo_probe_test();
// 'P' Get the range of pins to test or watch
uint8_t first_pin = PARSED_PIN_INDEX('P', 0),
last_pin = parser.seenval('P') ? first_pin : NUMBER_PINS_TOTAL - 1;
if (first_pin > last_pin) return;
// 'I' to ignore protected pins
const bool ignore_protection = parser.boolval('I');
// 'W' Watch until click, M108, or reset
if (parser.boolval('W')) {
SERIAL_ECHOLNPGM("Watching pins");
#ifdef ARDUINO_ARCH_SAM
NOLESS(first_pin, 2); // Don't hijack the UART pins
#endif
uint8_t pin_state[last_pin - first_pin + 1];
LOOP_S_LE_N(i, first_pin, last_pin) {
pin_t pin = GET_PIN_MAP_PIN_M43(i);
if (!VALID_PIN(pin)) continue;
if (M43_NEVER_TOUCH(i) || (!ignore_protection && pin_is_protected(pin))) continue;
pinMode(pin, INPUT_PULLUP);
delay(1);
/*
if (IS_ANALOG(pin))
pin_state[pin - first_pin] = analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)); // int16_t pin_state[...]
else
//*/
pin_state[i - first_pin] = extDigitalRead(pin);
}
#if HAS_RESUME_CONTINUE
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M43 Wait Called"), CONTINUE_STR);
#endif
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onUserConfirmRequired_P(PSTR("M43 Wait Called"));
#endif
#endif
for (;;) {
LOOP_S_LE_N(i, first_pin, last_pin) {
pin_t pin = GET_PIN_MAP_PIN_M43(i);
if (!VALID_PIN(pin)) continue;
if (M43_NEVER_TOUCH(i) || (!ignore_protection && pin_is_protected(pin))) continue;
const byte val =
/*
IS_ANALOG(pin)
? analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)) : // int16_t val
:
//*/
extDigitalRead(pin);
if (val != pin_state[i - first_pin]) {
report_pin_state_extended(pin, ignore_protection, false);
pin_state[i - first_pin] = val;
}
}
#if HAS_RESUME_CONTINUE
if (!wait_for_user) break;
#endif
safe_delay(200);
}
}
else {
// Report current state of selected pin(s)
LOOP_S_LE_N(i, first_pin, last_pin) {
pin_t pin = GET_PIN_MAP_PIN_M43(i);
if (VALID_PIN(pin)) report_pin_state_extended(pin, ignore_protection, true);
}
}
}
#endif // PINS_DEBUGGING

40
Marlin/src/gcode/config/M540.cpp Executable file
View File

@@ -0,0 +1,40 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
#include "../gcode.h"
#include "../../module/stepper.h"
/**
* M540: Set whether SD card print should abort on endstop hit (M540 S<0|1>)
*/
void GcodeSuite::M540() {
if (parser.seen('S'))
planner.abort_on_endstop_hit = parser.value_bool();
}
#endif // SD_ABORT_ON_ENDSTOP_HIT

74
Marlin/src/gcode/config/M575.cpp Executable file
View File

@@ -0,0 +1,74 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(BAUD_RATE_GCODE)
#include "../gcode.h"
/**
* M575 - Change serial baud rate
*
* P<index> - Serial port index. Omit for all.
* B<baudrate> - Baud rate (bits per second)
*/
void GcodeSuite::M575() {
const int32_t baud = parser.ulongval('B');
switch (baud) {
case 2400: case 9600: case 19200: case 38400: case 57600:
case 115200: case 250000: case 500000: case 1000000: {
const int8_t port = parser.intval('P', -99);
const bool set0 = (port == -99 || port == 0);
if (set0) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" Serial "
#if NUM_SERIAL > 1
, '0',
#else
"0"
#endif
" baud rate set to ", baud
);
}
#if NUM_SERIAL > 1
const bool set1 = (port == -99 || port == 1);
if (set1) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" Serial ", '1', " baud rate set to ", baud);
}
#endif
SERIAL_FLUSH();
if (set0) { MYSERIAL0.end(); MYSERIAL0.begin(baud); }
#if NUM_SERIAL > 1
if (set1) { MYSERIAL1.end(); MYSERIAL1.begin(baud); }
#endif
} break;
default: SERIAL_ECHO_MSG("?(B)aud rate implausible.");
}
}
#endif // NUM_SERIAL > 0 && BAUD_RATE_GCODE

99
Marlin/src/gcode/config/M672.cpp Executable file
View File

@@ -0,0 +1,99 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(SMART_EFFECTOR) && PIN_EXISTS(SMART_EFFECTOR_MOD)
#include "../gcode.h"
#include "../../HAL/shared/Delay.h"
#include "../parser.h"
/**
* M672 - Set/reset Duet Smart Effector sensitivity
*
* One of these is required:
* S<sensitivity> - 0-255
* R - Flag to reset sensitivity to default
*/
/**
* The Marlin format for the M672 command is different than shown in the Duet Smart Effector
* documentation https://duet3d.dozuki.com/Wiki/Smart_effector_and_carriage_adapters_for_delta_printer
*
* To set custom sensitivity:
* Duet: M672 S105:aaa:bbb
* Marlin: M672 Saaa
*
* (where aaa is the desired sensitivity and bbb is 255 - aaa).
*
* Revert sensitivity to factory settings:
* Duet: M672 S105:131:131
* Marlin: M672 R
*/
#define M672_PROGBYTE 105 // magic byte to start programming custom sensitivity
#define M672_ERASEBYTE 131 // magic byte to clear custom sensitivity
//
// Smart Effector byte send protocol:
//
// 0 0 1 0 ... always 0010
// b7 b6 b5 b4 ~b4 ... hi bits, NOT last bit
// b3 b2 b1 b0 ~b0 ... lo bits, NOT last bit
//
void M672_send(uint8_t b) { // bit rate requirement: 1KHz +/- 30%
LOOP_L_N(bits, 14) {
switch (bits) {
default: { OUT_WRITE(SMART_EFFECTOR_MOD_PIN, !!(b & 0x80)); b <<= 1; break; } // send bit, shift next into place
case 7:
case 12: { OUT_WRITE(SMART_EFFECTOR_MOD_PIN, !!(b & 0x80)); break; } // send bit. no shift
case 8:
case 13: { OUT_WRITE(SMART_EFFECTOR_MOD_PIN, !(b & 0x80)); b <<= 1; break; } // send inverted previous bit
case 0: case 1: // 00
case 3: { OUT_WRITE(SMART_EFFECTOR_MOD_PIN, LOW); break; } // 0010
case 2: { OUT_WRITE(SMART_EFFECTOR_MOD_PIN, HIGH); break; } // 001
}
DELAY_US(1000);
}
}
void GcodeSuite::M672() {
if (parser.seen('R')) {
M672_send(M672_ERASEBYTE);
M672_send(M672_ERASEBYTE);
}
else if (parser.seenval('S')) {
const int8_t M672_sensitivity = parser.value_byte();
M672_send(M672_PROGBYTE);
M672_send(M672_sensitivity);
M672_send(255 - M672_sensitivity);
}
else {
SERIAL_ECHO_MSG("!'S' or 'R' parameter required.");
return;
}
OUT_WRITE(SMART_EFFECTOR_MOD_PIN, LOW); // Keep Smart Effector in NORMAL mode
}
#endif // SMART_EFFECTOR && SMART_EFFECTOR_MOD_PIN

114
Marlin/src/gcode/config/M92.cpp Executable file
View File

@@ -0,0 +1,114 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../module/planner.h"
void report_M92(const bool echo=true, const int8_t e=-1) {
if (echo) SERIAL_ECHO_START(); else SERIAL_CHAR(' ');
SERIAL_ECHOPAIR_P(PSTR(" M92 X"), LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]),
SP_Z_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]));
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR_P(SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
#endif
SERIAL_EOL();
#if ENABLED(DISTINCT_E_FACTORS)
LOOP_L_N(i, E_STEPPERS) {
if (e >= 0 && i != e) continue;
if (echo) SERIAL_ECHO_START(); else SERIAL_CHAR(' ');
SERIAL_ECHOLNPAIR_P(PSTR(" M92 T"), (int)i,
SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS_N(i)]));
}
#endif
UNUSED_E(e);
}
/**
* M92: Set axis steps-per-unit for one or more axes, X, Y, Z, and E.
* (Follows the same syntax as G92)
*
* With multiple extruders use T to specify which one.
*
* If no argument is given print the current values.
*
* With MAGIC_NUMBERS_GCODE:
* Use 'H' and/or 'L' to get ideal layer-height information.
* 'H' specifies micro-steps to use. We guess if it's not supplied.
* 'L' specifies a desired layer height. Nearest good heights are shown.
*/
void GcodeSuite::M92() {
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
// No arguments? Show M92 report.
if (!parser.seen("XYZE"
#if ENABLED(MAGIC_NUMBERS_GCODE)
"HL"
#endif
)) return report_M92(true, target_extruder);
LOOP_XYZE(i) {
if (parser.seenval(axis_codes[i])) {
if (i == E_AXIS) {
const float value = parser.value_per_axis_units((AxisEnum)(E_AXIS_N(target_extruder)));
if (value < 20) {
float factor = planner.settings.axis_steps_per_mm[E_AXIS_N(target_extruder)] / value; // increase e constants if M92 E14 is given for netfab.
#if HAS_CLASSIC_JERK && HAS_CLASSIC_E_JERK
planner.max_jerk.e *= factor;
#endif
planner.settings.max_feedrate_mm_s[E_AXIS_N(target_extruder)] *= factor;
planner.max_acceleration_steps_per_s2[E_AXIS_N(target_extruder)] *= factor;
}
planner.settings.axis_steps_per_mm[E_AXIS_N(target_extruder)] = value;
}
else {
planner.settings.axis_steps_per_mm[i] = parser.value_per_axis_units((AxisEnum)i);
}
}
}
planner.refresh_positioning();
#if ENABLED(MAGIC_NUMBERS_GCODE)
#ifndef Z_MICROSTEPS
#define Z_MICROSTEPS 16
#endif
const float wanted = parser.floatval('L');
if (parser.seen('H') || wanted) {
const uint16_t argH = parser.ushortval('H'),
micro_steps = argH ?: Z_MICROSTEPS;
const float z_full_step_mm = micro_steps * planner.steps_to_mm[Z_AXIS];
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("{ micro_steps:", micro_steps, ", z_full_step_mm:", z_full_step_mm);
if (wanted) {
const float best = uint16_t(wanted / z_full_step_mm) * z_full_step_mm;
SERIAL_ECHOPAIR(", best:[", best);
if (best != wanted) { SERIAL_CHAR(','); SERIAL_ECHO(best + z_full_step_mm); }
SERIAL_CHAR(']');
}
SERIAL_ECHOLNPGM(" }");
}
#endif
}