Initial commit. Unusable Marlin 2.0.5.3 core without any custimization.

2020-06-02 11:44:35 +02:00
commit 987c858ae4
1519 changed files with 1361431 additions and 0 deletions
--- a/Marlin/src/gcode/temp/M104_M109.cpp
+++ b/Marlin/src/gcode/temp/M104_M109.cpp
@@ -0,0 +1,150 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * gcode/temp/M104_M109.cpp
+ *
+ * Hotend target temperature control
+ */
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if EXTRUDERS
+
+#include "../gcode.h"
+#include "../../module/temperature.h"
+#include "../../module/motion.h"
+#include "../../module/planner.h"
+#include "../../lcd/ultralcd.h"
+
+#include "../../MarlinCore.h" // for startOrResumeJob, etc.
+
+#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
+  #include "../../module/printcounter.h"
+  #if ENABLED(CANCEL_OBJECTS)
+    #include "../../feature/cancel_object.h"
+  #endif
+#endif
+
+#if ENABLED(SINGLENOZZLE)
+  #include "../../module/tool_change.h"
+#endif
+
+/**
+ * M104: Set hot end temperature
+ */
+void GcodeSuite::M104() {
+
+  if (DEBUGGING(DRYRUN)) return;
+
+  #if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1
+    constexpr int8_t target_extruder = 0;
+  #else
+    const int8_t target_extruder = get_target_extruder_from_command();
+    if (target_extruder < 0) return;
+  #endif
+
+  if (parser.seenval('S')) {
+    const int16_t temp = parser.value_celsius();
+    #if ENABLED(SINGLENOZZLE)
+      singlenozzle_temp[target_extruder] = temp;
+      if (target_extruder != active_extruder) return;
+    #endif
+    thermalManager.setTargetHotend(temp, target_extruder);
+
+    #if ENABLED(DUAL_X_CARRIAGE)
+      if (dxc_is_duplicating() && target_extruder == 0)
+        thermalManager.setTargetHotend(temp ? temp + duplicate_extruder_temp_offset : 0, 1);
+    #endif
+
+    #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
+      /**
+       * Stop the timer at the end of print. Start is managed by 'heat and wait' M109.
+       * Hotends use EXTRUDE_MINTEMP / 2 to allow nozzles to be put into hot standby
+       * mode, for instance in a dual extruder setup, without affecting the running
+       * print timer.
+       */
+      thermalManager.check_timer_autostart(false, true);
+    #endif
+  }
+
+  #if ENABLED(AUTOTEMP)
+    planner.autotemp_M104_M109();
+  #endif
+}
+
+/**
+ * M109: Sxxx Wait for hotend(s) to reach temperature. Waits only when heating.
+ *       Rxxx Wait for hotend(s) to reach temperature. Waits when heating and cooling.
+ *
+ * With PRINTJOB_TIMER_AUTOSTART also start the job timer on heating and stop it if turned off.
+ */
+void GcodeSuite::M109() {
+
+  if (DEBUGGING(DRYRUN)) return;
+
+  #if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1
+    constexpr int8_t target_extruder = 0;
+  #else
+    const int8_t target_extruder = get_target_extruder_from_command();
+    if (target_extruder < 0) return;
+  #endif
+
+  const bool no_wait_for_cooling = parser.seenval('S'),
+             set_temp = no_wait_for_cooling || parser.seenval('R');
+  if (set_temp) {
+    const int16_t temp = parser.value_celsius();
+    #if ENABLED(SINGLENOZZLE)
+      singlenozzle_temp[target_extruder] = temp;
+      if (target_extruder != active_extruder) return;
+    #endif
+    thermalManager.setTargetHotend(temp, target_extruder);
+
+    #if ENABLED(DUAL_X_CARRIAGE)
+      if (dxc_is_duplicating() && target_extruder == 0)
+        thermalManager.setTargetHotend(temp ? temp + duplicate_extruder_temp_offset : 0, 1);
+    #endif
+
+    #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
+      /**
+       * Use half EXTRUDE_MINTEMP to allow nozzles to be put into hot
+       * standby mode, (e.g., in a dual extruder setup) without affecting
+       * the running print timer.
+       */
+      thermalManager.check_timer_autostart(true, true);
+    #endif
+
+    #if HAS_DISPLAY
+      if (thermalManager.isHeatingHotend(target_extruder) || !no_wait_for_cooling)
+        thermalManager.set_heating_message(target_extruder);
+    #endif
+  }
+
+  #if ENABLED(AUTOTEMP)
+    planner.autotemp_M104_M109();
+  #endif
+
+  if (set_temp)
+    (void)thermalManager.wait_for_hotend(target_extruder, no_wait_for_cooling);
+}
+
+#endif // EXTRUDERS