Initial commit. Unusable Marlin 2.0.5.3 core without any custimization.

2020-06-02 11:44:35 +02:00
commit 987c858ae4
1519 changed files with 1361431 additions and 0 deletions
--- a/Marlin/src/gcode/temp/M140_M190.cpp
+++ b/Marlin/src/gcode/temp/M140_M190.cpp
@@ -0,0 +1,88 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * gcode/temp/M140_M190.cpp
+ *
+ * Bed target temperature control
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_HEATED_BED
+
+#include "../gcode.h"
+#include "../../module/temperature.h"
+#include "../../module/motion.h"
+#include "../../lcd/ultralcd.h"
+
+#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
+  #include "../../module/printcounter.h"
+#endif
+
+#if ENABLED(PRINTER_EVENT_LEDS)
+  #include "../../feature/leds/leds.h"
+#endif
+
+#include "../../MarlinCore.h" // for wait_for_heatup, idle, startOrResumeJob
+
+/**
+ * M140: Set bed temperature
+ */
+void GcodeSuite::M140() {
+  if (DEBUGGING(DRYRUN)) return;
+  if (parser.seenval('S')) thermalManager.setTargetBed(parser.value_celsius());
+
+  #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
+    /**
+     * Stop the timer at the end of print. Both hotend and bed target
+     * temperatures need to be set below mintemp. Order of M140 and M104
+     * at the end of the print does not matter.
+     */
+    thermalManager.check_timer_autostart(false, true);
+  #endif
+}
+
+/**
+ * M190: Sxxx Wait for bed current temp to reach target temp. Waits only when heating
+ *       Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
+ *
+ * With PRINTJOB_TIMER_AUTOSTART also start the job timer on heating.
+ */
+void GcodeSuite::M190() {
+  if (DEBUGGING(DRYRUN)) return;
+
+  const bool no_wait_for_cooling = parser.seenval('S');
+  if (no_wait_for_cooling || parser.seenval('R')) {
+    thermalManager.setTargetBed(parser.value_celsius());
+    #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
+      thermalManager.check_timer_autostart(true, false);
+    #endif
+  }
+  else return;
+
+  ui.set_status_P(thermalManager.isHeatingBed() ? GET_TEXT(MSG_BED_HEATING) : GET_TEXT(MSG_BED_COOLING));
+
+  thermalManager.wait_for_bed(no_wait_for_cooling);
+}
+
+#endif // HAS_HEATED_BED