Initial commit. Unusable Marlin 2.0.5.3 core without any custimization.
This commit is contained in:
Knutwurst
696
Marlin/src/inc/Conditionals_LCD.h
Executable file
696
Marlin/src/inc/Conditionals_LCD.h
Executable file
@@ -0,0 +1,696 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Conditionals_LCD.h
|
||||
* Conditionals that need to be set before Configuration_adv.h or pins.h
|
||||
*/
|
||||
|
||||
#if ENABLED(MORGAN_SCARA)
|
||||
#define IS_SCARA 1
|
||||
#define IS_KINEMATIC 1
|
||||
#elif ENABLED(DELTA)
|
||||
#define IS_KINEMATIC 1
|
||||
#else
|
||||
#define IS_CARTESIAN 1
|
||||
#endif
|
||||
|
||||
#if ENABLED(CARTESIO_UI)
|
||||
|
||||
#define DOGLCD
|
||||
#define IS_ULTIPANEL
|
||||
|
||||
#elif ENABLED(ZONESTAR_LCD)
|
||||
|
||||
#define ADC_KEYPAD
|
||||
#define IS_RRW_KEYPAD
|
||||
#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
|
||||
#define ADC_KEY_NUM 8
|
||||
#define IS_ULTIPANEL
|
||||
|
||||
// This helps to implement ADC_KEYPAD menus
|
||||
#define REVERSE_MENU_DIRECTION
|
||||
#define ENCODER_PULSES_PER_STEP 1
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#define ENCODER_FEEDRATE_DEADZONE 2
|
||||
|
||||
#elif ENABLED(RADDS_DISPLAY)
|
||||
#define IS_ULTIPANEL
|
||||
#define ENCODER_PULSES_PER_STEP 2
|
||||
|
||||
#elif EITHER(ANET_FULL_GRAPHICS_LCD, BQ_LCD_SMART_CONTROLLER)
|
||||
|
||||
#define IS_RRD_FG_SC
|
||||
|
||||
#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864)
|
||||
|
||||
#define IS_ULTRA_LCD
|
||||
#define DOGLCD
|
||||
#define IS_ULTIPANEL
|
||||
|
||||
#if ENABLED(miniVIKI)
|
||||
#define U8GLIB_ST7565_64128N
|
||||
#elif ENABLED(VIKI2)
|
||||
#define U8GLIB_ST7565_64128N
|
||||
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
||||
#define U8GLIB_LM6059_AF
|
||||
#elif ENABLED(AZSMZ_12864)
|
||||
#define U8GLIB_ST7565_64128N
|
||||
#endif
|
||||
|
||||
#elif ENABLED(OLED_PANEL_TINYBOY2)
|
||||
|
||||
#define IS_U8GLIB_SSD1306
|
||||
#define IS_ULTIPANEL
|
||||
|
||||
#elif ENABLED(RA_CONTROL_PANEL)
|
||||
|
||||
#define LCD_I2C_TYPE_PCA8574
|
||||
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
|
||||
#define IS_ULTIPANEL
|
||||
|
||||
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||
|
||||
#define DOGLCD
|
||||
#define U8GLIB_ST7920
|
||||
#define IS_ULTIPANEL
|
||||
|
||||
#elif ENABLED(CR10_STOCKDISPLAY)
|
||||
|
||||
#define IS_RRD_FG_SC
|
||||
#ifndef ST7920_DELAY_1
|
||||
#define ST7920_DELAY_1 DELAY_NS(125)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_2
|
||||
#define ST7920_DELAY_2 DELAY_NS(125)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_3
|
||||
#define ST7920_DELAY_3 DELAY_NS(125)
|
||||
#endif
|
||||
|
||||
#elif ENABLED(MKS_12864OLED)
|
||||
|
||||
#define IS_RRD_SC
|
||||
#define U8GLIB_SH1106
|
||||
|
||||
#elif ENABLED(MKS_12864OLED_SSD1306)
|
||||
|
||||
#define IS_RRD_SC
|
||||
#define IS_U8GLIB_SSD1306
|
||||
|
||||
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
|
||||
|
||||
#define MINIPANEL
|
||||
|
||||
#elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1)
|
||||
|
||||
#define FYSETC_MINI_12864
|
||||
#define DOGLCD
|
||||
#define IS_ULTIPANEL
|
||||
#define LED_COLORS_REDUCE_GREEN
|
||||
#if ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
|
||||
#define LED_BACKLIGHT_TIMEOUT 10000
|
||||
#endif
|
||||
|
||||
// Require LED backlighting enabled
|
||||
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||
#define RGB_LED
|
||||
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||
#define LED_CONTROL_MENU
|
||||
#define NEOPIXEL_LED
|
||||
#undef NEOPIXEL_TYPE
|
||||
#define NEOPIXEL_TYPE NEO_RGB
|
||||
#if NEOPIXEL_PIXELS < 3
|
||||
#undef NEOPIXELS_PIXELS
|
||||
#define NEOPIXEL_PIXELS 3
|
||||
#endif
|
||||
#ifndef NEOPIXEL_BRIGHTNESS
|
||||
#define NEOPIXEL_BRIGHTNESS 127
|
||||
#endif
|
||||
//#define NEOPIXEL_STARTUP_TEST
|
||||
#endif
|
||||
|
||||
#elif ENABLED(ULTI_CONTROLLER)
|
||||
|
||||
#define IS_ULTIPANEL
|
||||
#define U8GLIB_SSD1309
|
||||
#define LCD_RESET_PIN LCD_PINS_D6 // This controller need a reset pin
|
||||
#define ENCODER_PULSES_PER_STEP 2
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 2
|
||||
|
||||
#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
|
||||
|
||||
#define IS_RRD_SC
|
||||
#define LCD_WIDTH 16
|
||||
#define LCD_HEIGHT 2
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(IS_RRD_FG_SC)
|
||||
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#endif
|
||||
|
||||
#if EITHER(MAKRPANEL, MINIPANEL)
|
||||
#define IS_ULTIPANEL
|
||||
#define DOGLCD
|
||||
#if ENABLED(MAKRPANEL)
|
||||
#define U8GLIB_ST7565_64128N
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(IS_U8GLIB_SSD1306)
|
||||
#define U8GLIB_SSD1306
|
||||
#endif
|
||||
|
||||
#if ENABLED(OVERLORD_OLED)
|
||||
#define IS_ULTIPANEL
|
||||
#define U8GLIB_SH1106
|
||||
/**
|
||||
* PCA9632 for buzzer and LEDs via i2c
|
||||
* No auto-inc, red and green leds switched, buzzer
|
||||
*/
|
||||
#define PCA9632
|
||||
#define PCA9632_NO_AUTO_INC
|
||||
#define PCA9632_GRN 0x00
|
||||
#define PCA9632_RED 0x02
|
||||
#define PCA9632_BUZZER
|
||||
#define PCA9632_BUZZER_DATA { 0x09, 0x02 }
|
||||
|
||||
#define ENCODER_PULSES_PER_STEP 1 // Overlord uses buttons
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
|
||||
#if ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
|
||||
#define HAS_SSD1306_OLED_I2C 1
|
||||
#endif
|
||||
#if HAS_SSD1306_OLED_I2C
|
||||
#define IS_ULTRA_LCD
|
||||
#define DOGLCD
|
||||
#endif
|
||||
|
||||
// ST7920-based graphical displays
|
||||
#if ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER)
|
||||
#define DOGLCD
|
||||
#define U8GLIB_ST7920
|
||||
#define IS_RRD_SC
|
||||
#endif
|
||||
|
||||
// RepRapDiscount LCD or Graphical LCD with rotary click encoder
|
||||
#if ENABLED(IS_RRD_SC)
|
||||
#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
#endif
|
||||
|
||||
/**
|
||||
* SPI Ultipanels
|
||||
*/
|
||||
|
||||
// Basic Ultipanel-like displays
|
||||
#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, RIGIDBOT_PANEL, PANEL_ONE, U8GLIB_SH1106)
|
||||
#define IS_ULTIPANEL
|
||||
#endif
|
||||
|
||||
// Einstart OLED has Cardinal nav via pins defined in pins_EINSTART-S.h
|
||||
#if ENABLED(U8GLIB_SH1106_EINSTART)
|
||||
#define DOGLCD
|
||||
#define IS_ULTIPANEL
|
||||
#endif
|
||||
|
||||
// FSMC/SPI TFT Panels
|
||||
#if ENABLED(FSMC_GRAPHICAL_TFT)
|
||||
#define DOGLCD
|
||||
#define IS_ULTIPANEL
|
||||
#define DELAYED_BACKLIGHT_INIT
|
||||
#endif
|
||||
|
||||
/**
|
||||
* I2C Panels
|
||||
*/
|
||||
|
||||
#if EITHER(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004)
|
||||
|
||||
#define LCD_I2C_TYPE_PCF8575
|
||||
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
|
||||
|
||||
#if ENABLED(LCD_SAINSMART_I2C_2004)
|
||||
#define LCD_WIDTH 20
|
||||
#define LCD_HEIGHT 4
|
||||
#endif
|
||||
|
||||
#elif ENABLED(LCD_I2C_PANELOLU2)
|
||||
|
||||
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
|
||||
|
||||
#define LCD_I2C_TYPE_MCP23017
|
||||
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
|
||||
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (optional)
|
||||
#define IS_ULTIPANEL
|
||||
|
||||
#elif ENABLED(LCD_I2C_VIKI)
|
||||
|
||||
/**
|
||||
* Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
|
||||
*
|
||||
* This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
|
||||
* Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
|
||||
* Note: The pause/stop/resume LCD button pin should be connected to the Arduino
|
||||
* BTN_ENC pin (or set BTN_ENC to -1 if not used)
|
||||
*/
|
||||
#define LCD_I2C_TYPE_MCP23017
|
||||
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
|
||||
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
|
||||
#define IS_ULTIPANEL
|
||||
|
||||
#define ENCODER_FEEDRATE_DEADZONE 4
|
||||
|
||||
#define STD_ENCODER_PULSES_PER_STEP 1
|
||||
#define STD_ENCODER_STEPS_PER_MENU_ITEM 2
|
||||
|
||||
#elif ENABLED(G3D_PANEL)
|
||||
|
||||
#define STD_ENCODER_PULSES_PER_STEP 2
|
||||
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
|
||||
#elif ANY(REPRAP_DISCOUNT_SMART_CONTROLLER, miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2)
|
||||
|
||||
#define STD_ENCODER_PULSES_PER_STEP 4
|
||||
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
|
||||
#endif
|
||||
|
||||
#ifndef STD_ENCODER_PULSES_PER_STEP
|
||||
#if ENABLED(TOUCH_BUTTONS)
|
||||
#define STD_ENCODER_PULSES_PER_STEP 2
|
||||
#else
|
||||
#define STD_ENCODER_PULSES_PER_STEP 5
|
||||
#endif
|
||||
#endif
|
||||
#ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
|
||||
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
#ifndef ENCODER_PULSES_PER_STEP
|
||||
#define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
|
||||
#endif
|
||||
#ifndef ENCODER_STEPS_PER_MENU_ITEM
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
|
||||
#endif
|
||||
#ifndef ENCODER_FEEDRATE_DEADZONE
|
||||
#define ENCODER_FEEDRATE_DEADZONE 6
|
||||
#endif
|
||||
|
||||
// Shift register panels
|
||||
// ---------------------
|
||||
// 2 wire Non-latching LCD SR from:
|
||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||
#if ENABLED(FF_INTERFACEBOARD)
|
||||
#define SR_LCD_3W_NL // Non latching 3 wire shift register
|
||||
#define IS_ULTIPANEL
|
||||
#elif ENABLED(SAV_3DLCD)
|
||||
#define SR_LCD_2W_NL // Non latching 2 wire shift register
|
||||
#define IS_ULTIPANEL
|
||||
#endif
|
||||
|
||||
#if ENABLED(IS_ULTIPANEL)
|
||||
#define ULTIPANEL
|
||||
#endif
|
||||
#if ENABLED(ULTIPANEL)
|
||||
#define IS_ULTRA_LCD
|
||||
#ifndef NEWPANEL
|
||||
#define NEWPANEL
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(IS_ULTRA_LCD)
|
||||
#define ULTRA_LCD
|
||||
#endif
|
||||
|
||||
#if ENABLED(IS_RRW_KEYPAD)
|
||||
#define REPRAPWORLD_KEYPAD
|
||||
#endif
|
||||
|
||||
// Keypad needs a move step
|
||||
#if ENABLED(REPRAPWORLD_KEYPAD)
|
||||
#define NEWPANEL
|
||||
#ifndef REPRAPWORLD_KEYPAD_MOVE_STEP
|
||||
#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Aliases for LCD features
|
||||
#if ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
|
||||
#define HAS_DGUS_LCD 1
|
||||
#endif
|
||||
|
||||
// Extensible UI serial touch screens. (See src/lcd/extensible_ui)
|
||||
#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE)
|
||||
#define IS_EXTUI
|
||||
#define EXTENSIBLE_UI
|
||||
#endif
|
||||
|
||||
// Aliases for LCD features
|
||||
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
|
||||
#define HAS_DISPLAY 1
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
#define HAS_SPI_LCD 1
|
||||
#if ENABLED(DOGLCD)
|
||||
#define HAS_GRAPHICAL_LCD 1
|
||||
#else
|
||||
#define HAS_CHARACTER_LCD 1
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS)
|
||||
#define HAS_LCD_MENU 1
|
||||
#endif
|
||||
#if ENABLED(ADC_KEYPAD)
|
||||
#define HAS_ADC_BUTTONS 1
|
||||
#endif
|
||||
|
||||
#if HAS_GRAPHICAL_LCD
|
||||
#ifndef LCD_PIXEL_WIDTH
|
||||
#define LCD_PIXEL_WIDTH 128
|
||||
#endif
|
||||
#ifndef LCD_PIXEL_HEIGHT
|
||||
#define LCD_PIXEL_HEIGHT 64
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Extruders have some combination of stepper motors and hotends
|
||||
* so we separate these concepts into the defines:
|
||||
*
|
||||
* EXTRUDERS - Number of Selectable Tools
|
||||
* HOTENDS - Number of hotends, whether connected or separate
|
||||
* E_STEPPERS - Number of actual E stepper motors
|
||||
* E_MANUAL - Number of E steppers for LCD move options
|
||||
*
|
||||
*/
|
||||
|
||||
#if EXTRUDERS == 0
|
||||
#undef DISTINCT_E_FACTORS
|
||||
#undef SINGLENOZZLE
|
||||
#undef SWITCHING_EXTRUDER
|
||||
#undef SWITCHING_NOZZLE
|
||||
#undef MIXING_EXTRUDER
|
||||
#undef MK2_MULTIPLEXER
|
||||
#undef PRUSA_MMU2
|
||||
#endif
|
||||
|
||||
#if ENABLED(SWITCHING_EXTRUDER) // One stepper for every two EXTRUDERS
|
||||
#if EXTRUDERS > 4
|
||||
#define E_STEPPERS 3
|
||||
#elif EXTRUDERS > 2
|
||||
#define E_STEPPERS 2
|
||||
#else
|
||||
#define E_STEPPERS 1
|
||||
#endif
|
||||
#if DISABLED(SWITCHING_NOZZLE)
|
||||
#define HOTENDS E_STEPPERS
|
||||
#endif
|
||||
#elif ENABLED(MIXING_EXTRUDER)
|
||||
#define E_STEPPERS MIXING_STEPPERS
|
||||
#define E_MANUAL 1
|
||||
#define DUAL_MIXING_EXTRUDER (MIXING_STEPPERS == 2)
|
||||
#elif ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define E_STEPPERS EXTRUDERS
|
||||
#define E_MANUAL EXTRUDERS
|
||||
#elif ENABLED(PRUSA_MMU2)
|
||||
#define E_STEPPERS 1
|
||||
#endif
|
||||
|
||||
// No inactive extruders with MK2_MULTIPLEXER or SWITCHING_NOZZLE
|
||||
#if EITHER(MK2_MULTIPLEXER, SWITCHING_NOZZLE)
|
||||
#undef DISABLE_INACTIVE_EXTRUDER
|
||||
#endif
|
||||
|
||||
// Prusa MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
|
||||
#if EITHER(MK2_MULTIPLEXER, PRUSA_MMU2)
|
||||
#define SINGLENOZZLE
|
||||
#endif
|
||||
|
||||
#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER) // One hotend, one thermistor, no XY offset
|
||||
#undef HOTENDS
|
||||
#define HOTENDS 1
|
||||
#undef HOTEND_OFFSET_X
|
||||
#undef HOTEND_OFFSET_Y
|
||||
#endif
|
||||
|
||||
#ifndef HOTENDS
|
||||
#define HOTENDS EXTRUDERS
|
||||
#endif
|
||||
#ifndef E_STEPPERS
|
||||
#define E_STEPPERS EXTRUDERS
|
||||
#endif
|
||||
#ifndef E_MANUAL
|
||||
#define E_MANUAL EXTRUDERS
|
||||
#endif
|
||||
|
||||
// Helper macros for extruder and hotend arrays
|
||||
#define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++)
|
||||
#define ARRAY_BY_EXTRUDERS(V...) ARRAY_N(EXTRUDERS, V)
|
||||
#define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1, v1, v1)
|
||||
#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
|
||||
#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1, v1, v1)
|
||||
|
||||
#if ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)
|
||||
#define DO_SWITCH_EXTRUDER 1
|
||||
#endif
|
||||
|
||||
#ifdef SWITCHING_NOZZLE_E1_SERVO_NR
|
||||
#define SWITCHING_NOZZLE_TWO_SERVOS 1
|
||||
#endif
|
||||
|
||||
#if HOTENDS > 1
|
||||
#define HAS_HOTEND_OFFSET 1
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Default hotend offsets, if not defined
|
||||
*/
|
||||
#if HAS_HOTEND_OFFSET
|
||||
#ifndef HOTEND_OFFSET_X
|
||||
#define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
|
||||
#endif
|
||||
#ifndef HOTEND_OFFSET_Y
|
||||
#define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
|
||||
#endif
|
||||
#ifndef HOTEND_OFFSET_Z
|
||||
#define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* DISTINCT_E_FACTORS affects how some E factors are accessed
|
||||
*/
|
||||
#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
|
||||
#define XYZE_N (XYZ + E_STEPPERS)
|
||||
#define E_AXIS_N(E) AxisEnum(E_AXIS + E)
|
||||
#define UNUSED_E(E) NOOP
|
||||
#else
|
||||
#undef DISTINCT_E_FACTORS
|
||||
#define XYZE_N XYZE
|
||||
#define E_AXIS_N(E) E_AXIS
|
||||
#define UNUSED_E(E) UNUSED(E)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* The BLTouch Probe emulates a servo probe
|
||||
* and uses "special" angles for its state.
|
||||
*/
|
||||
#if ENABLED(BLTOUCH)
|
||||
#ifndef Z_PROBE_SERVO_NR
|
||||
#define Z_PROBE_SERVO_NR 0
|
||||
#endif
|
||||
#ifndef NUM_SERVOS
|
||||
#define NUM_SERVOS (Z_PROBE_SERVO_NR + 1)
|
||||
#endif
|
||||
#undef DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
#if NUM_SERVOS == 1
|
||||
#undef SERVO_DELAY
|
||||
#define SERVO_DELAY { 50 }
|
||||
#endif
|
||||
|
||||
// Always disable probe pin inverting for BLTouch
|
||||
#undef Z_MIN_PROBE_ENDSTOP_INVERTING
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false
|
||||
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
|
||||
#undef Z_MIN_ENDSTOP_INVERTING
|
||||
#define Z_MIN_ENDSTOP_INVERTING false
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef NUM_SERVOS
|
||||
#define NUM_SERVOS 0
|
||||
#endif
|
||||
|
||||
#ifndef PREHEAT_1_LABEL
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#endif
|
||||
|
||||
#ifndef PREHEAT_2_LABEL
|
||||
#define PREHEAT_2_LABEL "ABS"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Set a flag for a servo probe (or BLTouch)
|
||||
*/
|
||||
#if defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0
|
||||
#define HAS_Z_SERVO_PROBE 1
|
||||
#endif
|
||||
#if HAS_Z_SERVO_PROBE || EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
|
||||
#define HAS_SERVO_ANGLES 1
|
||||
#endif
|
||||
#if !HAS_SERVO_ANGLES
|
||||
#undef EDITABLE_SERVO_ANGLES
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Set flags for enabled probes
|
||||
*/
|
||||
#if ANY(HAS_Z_SERVO_PROBE, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE)
|
||||
#define HAS_BED_PROBE 1
|
||||
#endif
|
||||
|
||||
#if HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)
|
||||
#define PROBE_SELECTED 1
|
||||
#endif
|
||||
|
||||
#if HAS_BED_PROBE
|
||||
#if DISABLED(NOZZLE_AS_PROBE)
|
||||
#define HAS_PROBE_XY_OFFSET 1
|
||||
#endif
|
||||
#if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
|
||||
#define HAS_CUSTOM_PROBE_PIN 1
|
||||
#endif
|
||||
#if Z_HOME_DIR < 0 && !HAS_CUSTOM_PROBE_PIN
|
||||
#define HOMING_Z_WITH_PROBE 1
|
||||
#endif
|
||||
#ifndef Z_PROBE_LOW_POINT
|
||||
#define Z_PROBE_LOW_POINT -5
|
||||
#endif
|
||||
#if ENABLED(Z_PROBE_ALLEN_KEY)
|
||||
#define PROBE_TRIGGERED_WHEN_STOWED_TEST 1 // Extra test for Allen Key Probe
|
||||
#endif
|
||||
#if MULTIPLE_PROBING > 1
|
||||
#if EXTRA_PROBING
|
||||
#define TOTAL_PROBING (MULTIPLE_PROBING + EXTRA_PROBING)
|
||||
#else
|
||||
#define TOTAL_PROBING MULTIPLE_PROBING
|
||||
#endif
|
||||
#endif
|
||||
#else
|
||||
// Clear probe pin settings when no probe is selected
|
||||
#undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Set granular options based on the specific type of leveling
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#undef LCD_BED_LEVELING
|
||||
#if ENABLED(DELTA)
|
||||
#define UBL_SEGMENTED 1
|
||||
#endif
|
||||
#endif
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
|
||||
#define ABL_PLANAR 1
|
||||
#endif
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
#define ABL_GRID 1
|
||||
#endif
|
||||
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_3POINT)
|
||||
#define HAS_ABL_NOT_UBL 1
|
||||
#endif
|
||||
#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
|
||||
#define HAS_MESH 1
|
||||
#endif
|
||||
#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
|
||||
#define NEEDS_THREE_PROBE_POINTS 1
|
||||
#endif
|
||||
#if EITHER(HAS_ABL_NOT_UBL, AUTO_BED_LEVELING_UBL)
|
||||
#define HAS_ABL_OR_UBL 1
|
||||
#if DISABLED(PROBE_MANUALLY)
|
||||
#define HAS_AUTOLEVEL 1
|
||||
#endif
|
||||
#endif
|
||||
#if EITHER(HAS_ABL_OR_UBL, MESH_BED_LEVELING)
|
||||
#define HAS_LEVELING 1
|
||||
#if DISABLED(AUTO_BED_LEVELING_UBL)
|
||||
#define PLANNER_LEVELING 1
|
||||
#endif
|
||||
#endif
|
||||
#if EITHER(HAS_ABL_OR_UBL, Z_MIN_PROBE_REPEATABILITY_TEST)
|
||||
#define HAS_PROBING_PROCEDURE 1
|
||||
#endif
|
||||
#if !HAS_LEVELING
|
||||
#undef RESTORE_LEVELING_AFTER_G28
|
||||
#endif
|
||||
|
||||
#ifdef GRID_MAX_POINTS_X
|
||||
#define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
|
||||
#define GRID_LOOP(A,B) LOOP_L_N(A, GRID_MAX_POINTS_X) LOOP_L_N(B, GRID_MAX_POINTS_Y)
|
||||
#endif
|
||||
|
||||
#ifndef INVERT_X_DIR
|
||||
#define INVERT_X_DIR false
|
||||
#endif
|
||||
#ifndef INVERT_Y_DIR
|
||||
#define INVERT_Y_DIR false
|
||||
#endif
|
||||
#ifndef INVERT_Z_DIR
|
||||
#define INVERT_Z_DIR false
|
||||
#endif
|
||||
#ifndef INVERT_E_DIR
|
||||
#define INVERT_E_DIR false
|
||||
#endif
|
||||
|
||||
#if ENABLED(SLIM_LCD_MENUS)
|
||||
#define BOOT_MARLIN_LOGO_SMALL
|
||||
#endif
|
||||
|
||||
// This flag indicates some kind of jerk storage is needed
|
||||
#if ENABLED(CLASSIC_JERK) || IS_KINEMATIC
|
||||
#define HAS_CLASSIC_JERK 1
|
||||
#endif
|
||||
|
||||
// E jerk exists with JD disabled (of course) but also when Linear Advance is disabled on Delta/SCARA
|
||||
#if ENABLED(CLASSIC_JERK) || (IS_KINEMATIC && DISABLED(LIN_ADVANCE))
|
||||
#define HAS_CLASSIC_E_JERK 1
|
||||
#endif
|
||||
|
||||
#ifndef SPI_SPEED
|
||||
#define SPI_SPEED SPI_FULL_SPEED
|
||||
#endif
|
||||
|
||||
#if SERIAL_PORT == -1 || SERIAL_PORT_2 == -1
|
||||
#define HAS_USB_SERIAL 1
|
||||
#endif
|
||||
|
||||
/**
|
||||
* This setting is also used by M109 when trying to calculate
|
||||
* a ballpark safe margin to prevent wait-forever situation.
|
||||
*/
|
||||
#ifndef EXTRUDE_MINTEMP
|
||||
#define EXTRUDE_MINTEMP 170
|
||||
#endif
|
||||
292
Marlin/src/inc/Conditionals_adv.h
Executable file
292
Marlin/src/inc/Conditionals_adv.h
Executable file
@@ -0,0 +1,292 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Conditionals_adv.h
|
||||
* Defines that depend on advanced configuration.
|
||||
*/
|
||||
|
||||
#if EXTRUDERS == 0
|
||||
#define NO_VOLUMETRICS
|
||||
#undef TEMP_SENSOR_0
|
||||
#undef TEMP_SENSOR_1
|
||||
#undef TEMP_SENSOR_2
|
||||
#undef TEMP_SENSOR_3
|
||||
#undef TEMP_SENSOR_4
|
||||
#undef TEMP_SENSOR_5
|
||||
#undef TEMP_SENSOR_6
|
||||
#undef TEMP_SENSOR_7
|
||||
#undef FWRETRACT
|
||||
#undef PIDTEMP
|
||||
#undef AUTOTEMP
|
||||
#undef PID_EXTRUSION_SCALING
|
||||
#undef LIN_ADVANCE
|
||||
#undef FILAMENT_RUNOUT_SENSOR
|
||||
#undef ADVANCED_PAUSE_FEATURE
|
||||
#undef FILAMENT_RUNOUT_DISTANCE_MM
|
||||
#undef FILAMENT_LOAD_UNLOAD_GCODES
|
||||
#undef DISABLE_INACTIVE_EXTRUDER
|
||||
#undef FILAMENT_LOAD_UNLOAD_GCODES
|
||||
#undef EXTRUDER_RUNOUT_PREVENT
|
||||
#undef PREVENT_COLD_EXTRUSION
|
||||
#undef PREVENT_LENGTHY_EXTRUDE
|
||||
#undef THERMAL_PROTECTION_HOTENDS
|
||||
#undef THERMAL_PROTECTION_PERIOD
|
||||
#undef WATCH_TEMP_PERIOD
|
||||
#undef SHOW_TEMP_ADC_VALUES
|
||||
#endif
|
||||
|
||||
#if EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
|
||||
#define HAS_DUPLICATION_MODE 1
|
||||
#endif
|
||||
|
||||
#if ENABLED(PRINTCOUNTER) && (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0)
|
||||
#define HAS_SERVICE_INTERVALS 1
|
||||
#endif
|
||||
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define HAS_FILAMENT_SENSOR 1
|
||||
#endif
|
||||
|
||||
#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
|
||||
#define HAS_PRINT_PROGRESS 1
|
||||
#endif
|
||||
|
||||
#if HAS_PRINT_PROGRESS && EITHER(PRINT_PROGRESS_SHOW_DECIMALS, SHOW_REMAINING_TIME)
|
||||
#define HAS_PRINT_PROGRESS_PERMYRIAD 1
|
||||
#endif
|
||||
|
||||
#if ANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE)
|
||||
#define HAS_GAMES 1
|
||||
#if (1 < ENABLED(MARLIN_BRICKOUT) + ENABLED(MARLIN_INVADERS) + ENABLED(MARLIN_SNAKE) + ENABLED(MARLIN_MAZE))
|
||||
#define HAS_GAME_MENU 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ANY(FWRETRACT, HAS_LEVELING, SKEW_CORRECTION)
|
||||
#define HAS_POSITION_MODIFIERS 1
|
||||
#endif
|
||||
|
||||
#if ANY(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS, Z_MULTI_ENDSTOPS)
|
||||
#define HAS_EXTRA_ENDSTOPS 1
|
||||
#endif
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
#define HAS_SOFTWARE_ENDSTOPS 1
|
||||
#endif
|
||||
#if ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER, HAS_ADC_BUTTONS)
|
||||
#define HAS_RESUME_CONTINUE 1
|
||||
#endif
|
||||
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define HAS_COLOR_LEDS 1
|
||||
#endif
|
||||
#if ALL(HAS_RESUME_CONTINUE, PRINTER_EVENT_LEDS, SDSUPPORT)
|
||||
#define HAS_LEDS_OFF_FLAG 1
|
||||
#endif
|
||||
|
||||
// Multiple Z steppers
|
||||
#ifndef NUM_Z_STEPPER_DRIVERS
|
||||
#define NUM_Z_STEPPER_DRIVERS 1
|
||||
#endif
|
||||
|
||||
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
|
||||
#undef Z_STEPPER_ALIGN_AMP
|
||||
#endif
|
||||
#ifndef Z_STEPPER_ALIGN_AMP
|
||||
#define Z_STEPPER_ALIGN_AMP 1.0
|
||||
#endif
|
||||
|
||||
#define HAS_CUTTER EITHER(SPINDLE_FEATURE, LASER_FEATURE)
|
||||
|
||||
#if !defined(__AVR__) || !defined(USBCON)
|
||||
// Define constants and variables for buffering serial data.
|
||||
// Use only 0 or powers of 2 greater than 1
|
||||
// : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...]
|
||||
#ifndef RX_BUFFER_SIZE
|
||||
#define RX_BUFFER_SIZE 128
|
||||
#endif
|
||||
// 256 is the max TX buffer limit due to uint8_t head and tail
|
||||
// : [0, 4, 8, 16, 32, 64, 128, 256]
|
||||
#ifndef TX_BUFFER_SIZE
|
||||
#define TX_BUFFER_SIZE 32
|
||||
#endif
|
||||
#else
|
||||
// SERIAL_XON_XOFF not supported on USB-native devices
|
||||
#undef SERIAL_XON_XOFF
|
||||
#endif
|
||||
|
||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||
#ifndef ACTION_ON_PAUSE
|
||||
#define ACTION_ON_PAUSE "pause"
|
||||
#endif
|
||||
#ifndef ACTION_ON_PAUSED
|
||||
#define ACTION_ON_PAUSED "paused"
|
||||
#endif
|
||||
#ifndef ACTION_ON_RESUME
|
||||
#define ACTION_ON_RESUME "resume"
|
||||
#endif
|
||||
#ifndef ACTION_ON_RESUMED
|
||||
#define ACTION_ON_RESUMED "resumed"
|
||||
#endif
|
||||
#ifndef ACTION_ON_CANCEL
|
||||
#define ACTION_ON_CANCEL "cancel"
|
||||
#endif
|
||||
#ifndef ACTION_ON_KILL
|
||||
#define ACTION_ON_KILL "poweroff"
|
||||
#endif
|
||||
#if HAS_FILAMENT_SENSOR
|
||||
#ifndef ACTION_ON_FILAMENT_RUNOUT
|
||||
#define ACTION_ON_FILAMENT_RUNOUT "filament_runout"
|
||||
#endif
|
||||
#ifndef ACTION_REASON_ON_FILAMENT_RUNOUT
|
||||
#define ACTION_REASON_ON_FILAMENT_RUNOUT "filament_runout"
|
||||
#endif
|
||||
#endif
|
||||
#if ENABLED(G29_RETRY_AND_RECOVER)
|
||||
#ifndef ACTION_ON_G29_RECOVER
|
||||
#define ACTION_ON_G29_RECOVER "probe_rewipe"
|
||||
#endif
|
||||
#ifndef ACTION_ON_G29_FAILURE
|
||||
#define ACTION_ON_G29_FAILURE "probe_failed"
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(FYSETC_MINI_12864_2_1)
|
||||
#define LED_CONTROL_MENU
|
||||
#define LED_USER_PRESET_STARTUP
|
||||
#define LED_COLOR_PRESETS
|
||||
#ifndef LED_USER_PRESET_GREEN
|
||||
#define LED_USER_PRESET_GREEN 128
|
||||
#endif
|
||||
#ifndef LED_USER_PRESET_BLUE
|
||||
#define LED_USER_PRESET_BLUE 0
|
||||
#endif
|
||||
#ifndef LED_USER_PRESET_BRIGHTNESS
|
||||
#define LED_USER_PRESET_BRIGHTNESS 255
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Set defaults for unspecified LED user colors
|
||||
#if ENABLED(LED_CONTROL_MENU)
|
||||
#ifndef LED_USER_PRESET_RED
|
||||
#define LED_USER_PRESET_RED 255
|
||||
#endif
|
||||
#ifndef LED_USER_PRESET_GREEN
|
||||
#define LED_USER_PRESET_GREEN 255
|
||||
#endif
|
||||
#ifndef LED_USER_PRESET_BLUE
|
||||
#define LED_USER_PRESET_BLUE 255
|
||||
#endif
|
||||
#ifndef LED_USER_PRESET_WHITE
|
||||
#define LED_USER_PRESET_WHITE 0
|
||||
#endif
|
||||
#ifndef LED_USER_PRESET_BRIGHTNESS
|
||||
#ifdef NEOPIXEL_BRIGHTNESS
|
||||
#define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS
|
||||
#else
|
||||
#define LED_USER_PRESET_BRIGHTNESS 255
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// If platform requires early initialization of watchdog to properly boot
|
||||
#if ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM)
|
||||
#define EARLY_WATCHDOG 1
|
||||
#endif
|
||||
|
||||
// Extensible UI pin mapping for RepRapDiscount
|
||||
#if ENABLED(TOUCH_UI_FTDI_EVE) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP)
|
||||
#define TOUCH_UI_ULTIPANEL 1
|
||||
#endif
|
||||
|
||||
// Poll-based jogging for joystick and other devices
|
||||
#if ENABLED(JOYSTICK)
|
||||
#define POLL_JOG
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Driver Timings
|
||||
* NOTE: Driver timing order is longest-to-shortest duration.
|
||||
* Preserve this ordering when adding new drivers.
|
||||
*/
|
||||
|
||||
#ifndef MINIMUM_STEPPER_POST_DIR_DELAY
|
||||
#if HAS_DRIVER(TB6560)
|
||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 15000
|
||||
#elif HAS_DRIVER(TB6600)
|
||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 1500
|
||||
#elif HAS_DRIVER(DRV8825)
|
||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 650
|
||||
#elif HAS_DRIVER(LV8729)
|
||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 500
|
||||
#elif HAS_DRIVER(A5984)
|
||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 400
|
||||
#elif HAS_DRIVER(A4988)
|
||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 200
|
||||
#elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE
|
||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 20
|
||||
#else
|
||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 0 // Expect at least 10µS since one Stepper ISR must transpire
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef MINIMUM_STEPPER_PRE_DIR_DELAY
|
||||
#define MINIMUM_STEPPER_PRE_DIR_DELAY MINIMUM_STEPPER_POST_DIR_DELAY
|
||||
#endif
|
||||
|
||||
#ifndef MINIMUM_STEPPER_PULSE
|
||||
#if HAS_DRIVER(TB6560)
|
||||
#define MINIMUM_STEPPER_PULSE 30
|
||||
#elif HAS_DRIVER(TB6600)
|
||||
#define MINIMUM_STEPPER_PULSE 3
|
||||
#elif HAS_DRIVER(DRV8825)
|
||||
#define MINIMUM_STEPPER_PULSE 2
|
||||
#elif HAS_DRIVER(A4988) || HAS_DRIVER(A5984)
|
||||
#define MINIMUM_STEPPER_PULSE 1
|
||||
#elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE
|
||||
#define MINIMUM_STEPPER_PULSE 0
|
||||
#elif HAS_DRIVER(LV8729)
|
||||
#define MINIMUM_STEPPER_PULSE 0
|
||||
#else
|
||||
#define MINIMUM_STEPPER_PULSE 2
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef MAXIMUM_STEPPER_RATE
|
||||
#if HAS_DRIVER(TB6560)
|
||||
#define MAXIMUM_STEPPER_RATE 15000
|
||||
#elif HAS_DRIVER(TB6600)
|
||||
#define MAXIMUM_STEPPER_RATE 150000
|
||||
#elif HAS_DRIVER(DRV8825)
|
||||
#define MAXIMUM_STEPPER_RATE 250000
|
||||
#elif HAS_DRIVER(A4988)
|
||||
#define MAXIMUM_STEPPER_RATE 500000
|
||||
#elif HAS_DRIVER(LV8729)
|
||||
#define MAXIMUM_STEPPER_RATE 1000000
|
||||
#elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE
|
||||
#define MAXIMUM_STEPPER_RATE 5000000
|
||||
#else
|
||||
#define MAXIMUM_STEPPER_RATE 250000
|
||||
#endif
|
||||
#endif
|
||||
2173
Marlin/src/inc/Conditionals_post.h
Executable file
2173
Marlin/src/inc/Conditionals_post.h
Executable file
File diff suppressed because it is too large
Load Diff
46
Marlin/src/inc/MarlinConfig.h
Executable file
46
Marlin/src/inc/MarlinConfig.h
Executable file
@@ -0,0 +1,46 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
//
|
||||
// Prefix header for all Marlin sources
|
||||
//
|
||||
|
||||
#include "MarlinConfigPre.h"
|
||||
|
||||
#include "../HAL/HAL.h"
|
||||
|
||||
#include "../pins/pins.h"
|
||||
#include HAL_PATH(../HAL, spi_pins.h)
|
||||
|
||||
#include "Conditionals_post.h"
|
||||
#include HAL_PATH(../HAL, inc/Conditionals_post.h)
|
||||
|
||||
#include "../core/types.h" // Ahead of sanity-checks
|
||||
|
||||
#include "SanityCheck.h"
|
||||
#include HAL_PATH(../HAL, inc/SanityCheck.h)
|
||||
|
||||
// Include all core headers
|
||||
#include "../core/language.h"
|
||||
#include "../core/utility.h"
|
||||
#include "../core/serial.h"
|
||||
54
Marlin/src/inc/MarlinConfigPre.h
Executable file
54
Marlin/src/inc/MarlinConfigPre.h
Executable file
@@ -0,0 +1,54 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef __MARLIN_FIRMWARE__
|
||||
#define __MARLIN_FIRMWARE__
|
||||
#endif
|
||||
|
||||
//
|
||||
// Prefix header to acquire configurations
|
||||
//
|
||||
#include <stdint.h>
|
||||
|
||||
#include "../HAL/platforms.h"
|
||||
|
||||
#include "../core/boards.h"
|
||||
#include "../core/macros.h"
|
||||
#include "../../Configuration.h"
|
||||
|
||||
#ifdef CUSTOM_VERSION_FILE
|
||||
#if __has_include(STRINGIFY(../../CUSTOM_VERSION_FILE))
|
||||
#include STRINGIFY(../../CUSTOM_VERSION_FILE)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#include "Version.h"
|
||||
|
||||
#include "Conditionals_LCD.h"
|
||||
#include HAL_PATH(../HAL, inc/Conditionals_LCD.h)
|
||||
|
||||
#include "../core/drivers.h"
|
||||
#include "../../Configuration_adv.h"
|
||||
|
||||
#include "Conditionals_adv.h"
|
||||
#include HAL_PATH(../HAL, inc/Conditionals_adv.h)
|
||||
2835
Marlin/src/inc/SanityCheck.h
Executable file
2835
Marlin/src/inc/SanityCheck.h
Executable file
File diff suppressed because it is too large
Load Diff
122
Marlin/src/inc/Version.h
Executable file
122
Marlin/src/inc/Version.h
Executable file
@@ -0,0 +1,122 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Release version. Leave the Marlin version or apply a custom scheme.
|
||||
*/
|
||||
#ifndef SHORT_BUILD_VERSION
|
||||
#define SHORT_BUILD_VERSION "2.0.5.3"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Verbose version identifier containing a unique identifier, such as the
|
||||
* vendor name, download location, GitHub account, etc.
|
||||
*/
|
||||
#ifndef DETAILED_BUILD_VERSION
|
||||
#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (GitHub)"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* The STRING_DISTRIBUTION_DATE represents when the binary file was built,
|
||||
* here we define this default string as the date where the latest release
|
||||
* version was tagged.
|
||||
*/
|
||||
#ifndef STRING_DISTRIBUTION_DATE
|
||||
#define STRING_DISTRIBUTION_DATE "2020-03-31"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Minimum Configuration.h and Configuration_adv.h file versions.
|
||||
* Set based on the release version number. Used to catch an attempt to use
|
||||
* older configurations. Override these if using a custom versioning scheme
|
||||
* to alert users to major changes.
|
||||
*/
|
||||
|
||||
#define MARLIN_HEX_VERSION 020005
|
||||
#ifndef REQUIRED_CONFIGURATION_H_VERSION
|
||||
#define REQUIRED_CONFIGURATION_H_VERSION MARLIN_HEX_VERSION
|
||||
#endif
|
||||
#ifndef REQUIRED_CONFIGURATION_ADV_H_VERSION
|
||||
#define REQUIRED_CONFIGURATION_ADV_H_VERSION MARLIN_HEX_VERSION
|
||||
#endif
|
||||
|
||||
/**
|
||||
* The protocol for communication to the host. Protocol indicates communication
|
||||
* standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
|
||||
* (Other behaviors are given by the firmware version and capabilities report.)
|
||||
*/
|
||||
#ifndef PROTOCOL_VERSION
|
||||
#define PROTOCOL_VERSION "1.0"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Define a generic printer name to be output to the LCD after booting Marlin.
|
||||
*/
|
||||
#ifndef MACHINE_NAME
|
||||
#define MACHINE_NAME "3D Printer"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Website where users can find Marlin source code for the binary installed on the
|
||||
* device. Override this if you provide public source code download. (GPLv3 requires
|
||||
* providing the source code to your customers.)
|
||||
*/
|
||||
#ifndef SOURCE_CODE_URL
|
||||
#define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Default generic printer UUID.
|
||||
*/
|
||||
#ifndef DEFAULT_MACHINE_UUID
|
||||
#define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* The WEBSITE_URL is the location where users can get more information such as
|
||||
* documentation about a specific Marlin release. Displayed in the Info Menu.
|
||||
*/
|
||||
#ifndef WEBSITE_URL
|
||||
#define WEBSITE_URL "http://marlinfw.org"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Set the vendor info the serial USB interface, if changable
|
||||
* Currently only supported by DUE platform
|
||||
*/
|
||||
#ifndef USB_DEVICE_VENDOR_ID
|
||||
#define USB_DEVICE_VENDOR_ID 0x03EB /* ATMEL VID */
|
||||
#endif
|
||||
#ifndef USB_DEVICE_PRODUCT_ID
|
||||
#define USB_DEVICE_PRODUCT_ID 0x2424 /* MSC / CDC */
|
||||
#endif
|
||||
//! USB Device string definitions (Optional)
|
||||
#ifndef USB_DEVICE_MANUFACTURE_NAME
|
||||
#define USB_DEVICE_MANUFACTURE_NAME WEBSITE_URL
|
||||
#endif
|
||||
#ifdef CUSTOM_MACHINE_NAME
|
||||
#define USB_DEVICE_PRODUCT_NAME CUSTOM_MACHINE_NAME
|
||||
#else
|
||||
#define USB_DEVICE_PRODUCT_NAME MACHINE_NAME
|
||||
#endif
|
||||
#define USB_DEVICE_SERIAL_NAME "123985739853"
|
||||
Reference in New Issue
Block a user