Initial commit. Unusable Marlin 2.0.5.3 core without any custimization.

2020-06-02 11:44:35 +02:00
commit 987c858ae4
1519 changed files with 1361431 additions and 0 deletions
--- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
+++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
@@ -0,0 +1,120 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Arduino Mega with RAMPS v1.4 for Anycubic
+ */
+
+#define BOARD_INFO_NAME "Anycubic RAMPS 1.4"
+
+//
+// Servos
+//
+#if MB(TRIGORILLA_14_11)
+  #define SERVO0_PIN                           5
+  #define SERVO1_PIN                           4
+  #define SERVO2_PIN                          11
+  #define SERVO3_PIN                           6
+#endif
+
+//
+// Custom Limit Switches
+//
+//#define ANYCUBIC_4_MAX_PRO_ENDSTOPS
+#if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS)
+  #define X_MAX_PIN                           43
+  #define Y_MIN_PIN                           19
+#endif
+
+// Labeled pins
+#define TG_HEATER_BED_PIN                      8
+#define TG_HEATER_0_PIN                       10
+#define TG_HEATER_1_PIN                       45  // Anycubic Kossel: Unused
+
+#define TG_FAN0_PIN                            9  // Anycubic Kossel: Usually the part cooling fan
+#define TG_FAN1_PIN                            7  // Anycubic Kossel: Unused
+#define TG_FAN2_PIN                           44  // Anycubic Kossel: Hotend fan
+
+// Remap MOSFET pins to common usages:
+
+#define RAMPS_D10_PIN            TG_HEATER_0_PIN  // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h
+
+#if HOTENDS > 1                                   // EEF and EEB
+  #define RAMPS_D9_PIN           TG_HEATER_1_PIN
+  #if !TEMP_SENSOR_BED
+    // EEF
+    #define RAMPS_D8_PIN             TG_FAN0_PIN
+  #else
+    // EEB
+    #define RAMPS_D8_PIN       TG_HEATER_BED_PIN
+    #define FAN_PIN                  TG_FAN0_PIN  // Override pin 4 in pins_RAMPS.h
+  #endif
+#elif TEMP_SENSOR_BED
+  // EFB (Anycubic Kossel default)
+  #define RAMPS_D9_PIN               TG_FAN0_PIN
+  #define RAMPS_D8_PIN         TG_HEATER_BED_PIN
+#else
+  // EFF
+  #define RAMPS_D9_PIN               TG_FAN1_PIN
+  #define RAMPS_D8_PIN               TG_FAN0_PIN
+#endif
+
+#if HOTENDS > 1 || TEMP_SENSOR_BED                // EEF, EEB, EFB
+  #define FAN1_PIN                   TG_FAN1_PIN
+#endif
+#define FAN2_PIN                     TG_FAN2_PIN
+#define ORIG_E0_AUTO_FAN_PIN         TG_FAN2_PIN  // Used in Anycubic Kossel example config
+
+#include "pins_RAMPS.h"
+
+//
+// AnyCubic made the following changes to 1.1.0-RC8
+// If these are appropriate for your LCD let us know.
+//
+#if 0 && HAS_SPI_LCD
+
+  // LCD Display output pins
+  #if BOTH(NEWPANEL, PANEL_ONE)
+    #undef LCD_PINS_D6
+    #define LCD_PINS_D6                       57
+  #endif
+
+  // LCD Display input pins
+  #if ENABLED(NEWPANEL)
+    #if ANY(VIKI2, miniVIKI)
+      #undef DOGLCD_A0
+      #define DOGLCD_A0                       23
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+      #undef BEEPER_PIN
+      #define BEEPER_PIN                      33
+      #undef LCD_BACKLIGHT_PIN
+      #define LCD_BACKLIGHT_PIN               67
+    #endif
+  #elif ENABLED(MINIPANEL)
+    #undef BEEPER_PIN
+    #define BEEPER_PIN                        33
+    #undef DOGLCD_A0
+    #define DOGLCD_A0                         42
+  #endif
+
+#endif // HAS_SPI_LCD