Initial commit. Unusable Marlin 2.0.5.3 core without any custimization.

2020-06-02 11:44:35 +02:00
commit 987c858ae4
1519 changed files with 1361431 additions and 0 deletions
--- a/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h
+++ b/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h
@@ -0,0 +1,123 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * CNControls V15 for HMS434 with DUE pin assignments
+ */
+
+#ifndef __SAM3X8E__
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "CN Controls V15D"
+
+//
+// Servos
+//
+#define SERVO0_PIN                             6
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            34
+#define Y_STOP_PIN                            39
+#define Z_STOP_PIN                            62
+
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     49
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            14
+#define X_DIR_PIN                             25
+#define X_ENABLE_PIN                          26
+
+#define Y_STEP_PIN                            11
+#define Y_DIR_PIN                             12
+#define Y_ENABLE_PIN                          15
+
+#define Z_STEP_PIN                            24
+#define Z_DIR_PIN                             27
+#define Z_ENABLE_PIN                          28
+
+#define E0_STEP_PIN                           64
+#define E0_DIR_PIN                            65
+#define E0_ENABLE_PIN                         63
+
+#define E1_STEP_PIN                            8
+#define E1_DIR_PIN                             7
+#define E1_ENABLE_PIN                         29
+
+//
+// Temperature Sensors
+// Analog Inputs
+//
+#define TEMP_0_PIN                             1
+#define TEMP_1_PIN                             2
+#define TEMP_BED_PIN                           4
+
+#ifndef TEMP_CHAMBER_PIN
+  #define TEMP_CHAMBER_PIN                     5
+#endif
+
+//
+// Heaters
+//
+#define HEATER_0_PIN                           3
+#define HEATER_1_PIN                           4
+#define HEATER_BED_PIN                        32
+#define HEATER_CHAMBER_PIN                    33
+
+//
+// Fans
+//
+//#define FAN0_PIN                             8
+#define ORIG_E0_AUTO_FAN_PIN                  30
+#define ORIG_E1_AUTO_FAN_PIN                  30
+#define ORIG_E2_AUTO_FAN_PIN                  30
+#define ORIG_E3_AUTO_FAN_PIN                  30
+#define ORIG_CHAMBER_AUTO_FAN_PIN             10
+
+//
+// SD card
+//
+#define SCK_PIN                               76
+#define MISO_PIN                              74
+#define MOSI_PIN                              75
+#define SDSS                                  53
+#define SD_DETECT_PIN                         40
+
+// Common I/O
+
+//#define PWM_1_PIN                            6  // probe
+//#define PWM_2_PIN                           13
+//#define SPARE_IO                            17
+#define BEEPER_PIN                            13
+#define STAT_LED_BLUE_PIN                     -1
+#define STAT_LED_RED_PIN                      31
+
+// G425 CALIBRATION_GCODE default pin
+#ifndef CALIBRATION_PIN
+  #define CALIBRATION_PIN                     66
+#endif